[PATCH] ARM: OMAP1: PM: fix some build warnings on 1510-only Kconfigs

Paul Walmsley paul at pwsan.com
Fri Feb 6 16:23:38 PST 2015


Building an OMAP1510-only Kconfig generates the following warnings:

arch/arm/mach-omap1/pm.c: In function ‘omap1_pm_idle’:
arch/arm/mach-omap1/pm.c:123:2: warning: #warning Enable 32kHz OS timer in order to allow sleep states in idle [-Wcpp]
 #warning Enable 32kHz OS timer in order to allow sleep states in idle
  ^
arch/arm/mach-omap1/pm.c: At top level:
arch/arm/mach-omap1/pm.c:76:23: warning: ‘enable_dyn_sleep’ defined but not used [-Wunused-variable]
 static unsigned short enable_dyn_sleep = 0;
                       ^

These are not so easy to fix in an obviously correct fashion, since I
don't have these devices up and running in my testbed.  So, use
arch/arm/plat-omap/Kconfig and the existing pm.c source as a guide,
and posit that deep power saving states are only supported on OMAP16xx
chips with kernels built with both CONFIG_OMAP_DM_TIMER=y and
CONFIG_OMAP_32K_TIMER=y.

While here, clean up a few printk()s and unnecessary #ifdefs.

Signed-off-by: Paul Walmsley <paul at pwsan.com>
Cc: Jon Hunter <jonathanh at nvidia.com>
Cc: Aaro Koskinen <aaro.koskinen at iki.fi>
Cc: Tuukka Tikkanen <tuukka.tikkanen at linaro.org>
Cc: Kevin Hilman <khilman at deeprootsystems.com>
Cc: Tony Lindgren <tony at atomide.com>
Cc: Russell King <linux at arm.linux.org.uk>
Cc: linux-omap at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
---

Hi folks, if anyone out there is still experimenting with OMAP1 PM, or has 
a copy of the OMAP1510 TRMs, could you please check this patch?  I'm 
unable to test it since I don't have any OMAP1 devices currently active 
in the testbed.  It at least compiles and deals with the build warnings:

http://www.pwsan.com/omap/testlogs/fix-omap-warnings-v3.21/20150206154619/

Non-critical; targeted for v3.20-rc1 or v3.21-rc1.


 arch/arm/mach-omap1/pm.c | 42 +++++++++++++++++++++---------------------
 1 file changed, 21 insertions(+), 21 deletions(-)

diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c
index 34b4c0044961..d46d8a222fbb 100644
--- a/arch/arm/mach-omap1/pm.c
+++ b/arch/arm/mach-omap1/pm.c
@@ -71,13 +71,7 @@ static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE];
 static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE];
 static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE];
 
-#ifndef CONFIG_OMAP_32K_TIMER
-
-static unsigned short enable_dyn_sleep = 0;
-
-#else
-
-static unsigned short enable_dyn_sleep = 1;
+static unsigned short enable_dyn_sleep;
 
 static ssize_t idle_show(struct kobject *kobj, struct kobj_attribute *attr,
 			 char *buf)
@@ -90,8 +84,9 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
 {
 	unsigned short value;
 	if (sscanf(buf, "%hu", &value) != 1 ||
-	    (value != 0 && value != 1)) {
-		printk(KERN_ERR "idle_sleep_store: Invalid value\n");
+	    (value != 0 && value != 1) ||
+	    (value != 0 && !IS_ENABLED(CONFIG_OMAP_32K_TIMER))) {
+		pr_err("idle_sleep_store: Invalid value\n");
 		return -EINVAL;
 	}
 	enable_dyn_sleep = value;
@@ -101,7 +96,6 @@ static ssize_t idle_store(struct kobject *kobj, struct kobj_attribute *attr,
 static struct kobj_attribute sleep_while_idle_attr =
 	__ATTR(sleep_while_idle, 0644, idle_show, idle_store);
 
-#endif
 
 static void (*omap_sram_suspend)(unsigned long r0, unsigned long r1) = NULL;
 
@@ -120,12 +114,11 @@ void omap1_pm_idle(void)
 	local_fiq_disable();
 
 #if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER)
-#warning Enable 32kHz OS timer in order to allow sleep states in idle
 	use_idlect1 = use_idlect1 & ~(1 << 9);
-#else
+#endif
+
 	if (enable_dyn_sleep)
 		do_sleep = 1;
-#endif
 
 #ifdef CONFIG_OMAP_DM_TIMER
 	use_idlect1 = omap_dm_timer_modify_idlect_mask(use_idlect1);
@@ -635,15 +628,24 @@ static const struct platform_suspend_ops omap_pm_ops = {
 
 static int __init omap_pm_init(void)
 {
-
-#ifdef CONFIG_OMAP_32K_TIMER
-	int error;
-#endif
+	int error = 0;
 
 	if (!cpu_class_is_omap1())
 		return -ENODEV;
 
-	printk("Power Management for TI OMAP.\n");
+	pr_info("Power Management for TI OMAP.\n");
+
+	if (!IS_ENABLED(CONFIG_OMAP_32K_TIMER))
+		pr_info("OMAP1 PM: sleep states in idle disabled due to no 32KiHz timer\n");
+
+	if (!IS_ENABLED(CONFIG_OMAP_DM_TIMER))
+		pr_info("OMAP1 PM: sleep states in idle disabled due to no DMTIMER support\n");
+
+	if (IS_ENABLED(CONFIG_OMAP_32K_TIMER) &&
+	    IS_ENABLED(CONFIG_OMAP_DM_TIMER) && cpu_is_omap16xx()) {
+		pr_info("OMAP1 PM: sleep states in idle enabled\n");
+		enable_dyn_sleep = 1;
+	}
 
 	/*
 	 * We copy the assembler sleep/wakeup routines to SRAM.
@@ -693,17 +695,15 @@ static int __init omap_pm_init(void)
 	omap_pm_init_debugfs();
 #endif
 
-#ifdef CONFIG_OMAP_32K_TIMER
 	error = sysfs_create_file(power_kobj, &sleep_while_idle_attr.attr);
 	if (error)
 		printk(KERN_ERR "sysfs_create_file failed: %d\n", error);
-#endif
 
 	if (cpu_is_omap16xx()) {
 		/* configure LOW_PWR pin */
 		omap_cfg_reg(T20_1610_LOW_PWR);
 	}
 
-	return 0;
+	return error;
 }
 __initcall(omap_pm_init);
-- 
2.1.4


More information about the linux-arm-kernel mailing list