[PATCH v5 6/6] ARM: dts: enable clock support for Broadcom Cygnus
Ray Jui
rjui at broadcom.com
Wed Feb 4 16:55:05 PST 2015
Replace current device tree dummy clocks with real clock support for
Broadcom Cygnus SoC
Signed-off-by: Ray Jui <rjui at broadcom.com>
Reviewed-by: Scott Branden <sbraden at broadcom.com>
---
arch/arm/boot/dts/bcm-cygnus-clock.dtsi | 110 ++++++++++++++++++++++++-------
arch/arm/boot/dts/bcm-cygnus.dtsi | 2 +-
2 files changed, 86 insertions(+), 26 deletions(-)
diff --git a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
index 60d8389..abb8a3f 100644
--- a/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus-clock.dtsi
@@ -36,56 +36,116 @@ clocks {
ranges;
osc: oscillator {
+ #clock-cells = <0>;
compatible = "fixed-clock";
- #clock-cells = <1>;
clock-frequency = <25000000>;
};
- apb_clk: apb_clk {
- compatible = "fixed-clock";
+ /* Cygnus ARM PLL */
+ armpll: armpll {
#clock-cells = <0>;
- clock-frequency = <1000000000>;
+ compatible = "brcm,cygnus-armpll";
+ clocks = <&osc>;
+ reg = <0x19000000 0x1000>;
};
- periph_clk: periph_clk {
- compatible = "fixed-clock";
+ /* peripheral clock for system timer */
+ arm_periph_clk: arm_periph_clk {
#clock-cells = <0>;
- clock-frequency = <500000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
- sdio_clk: lcpll_ch2 {
- compatible = "fixed-clock";
+ /* APB bus clock */
+ apb_clk: apb_clk {
#clock-cells = <0>;
- clock-frequency = <200000000>;
+ compatible = "fixed-factor-clock";
+ clocks = <&armpll>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
- axi81_clk: axi81_clk {
- compatible = "fixed-clock";
+ genpll: genpll {
#clock-cells = <0>;
- clock-frequency = <100000000>;
+ compatible = "brcm,cygnus-genpll";
+ reg = <0x0301d000 0x2c>,
+ <0x0301c020 0x4>;
+ clocks = <&osc>;
};
- keypad_clk: keypad_clk {
- compatible = "fixed-clock";
+ /* various clocks running off the GENPLL */
+ genpll_clks: genpll_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-genpll-clk";
+ reg = <0x0301d000 0x2c>;
+ clocks = <&genpll>;
+ clock-output-names = "axi21", "250mhz", "ihost_sys",
+ "enet_sw", "audio_125", "can";
+ };
+
+ /* always 1/2 of the axi21 clock */
+ axi41_clk: axi41_clk {
#clock-cells = <0>;
- clock-frequency = <31806>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_clks 0>;
+ clock-div = <2>;
+ clock-mult = <1>;
};
- adc_clk: adc_clk {
- compatible = "fixed-clock";
+ /* always 1/4 of the axi21 clock */
+ axi81_clk: axi81_clk {
#clock-cells = <0>;
- clock-frequency = <1562500>;
+ compatible = "fixed-factor-clock";
+ clocks = <&genpll_clks 0>;
+ clock-div = <4>;
+ clock-mult = <1>;
};
- pwm_clk: pwm_clk {
- compatible = "fixed-clock";
+ lcpll0: lcpll0 {
#clock-cells = <0>;
- clock-frequency = <1000000>;
+ compatible = "brcm,cygnus-lcpll0";
+ reg = <0x0301d02c 0x1c>,
+ <0x0301c020 0x4>;
+ clocks = <&osc>;
};
- lcd_clk: mipipll_ch1 {
- compatible = "fixed-clock";
+ /* various clocks running off the LCPLL0 */
+ lcpll0_clks: lcpll0_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-lcpll0-clk";
+ reg = <0x0301d02c 0x1c>;
+ clocks = <&lcpll0>;
+ clock-output-names = "pcie_phy", "ddr_phy", "sdio",
+ "usb_phy", "smart_card", "ch5";
+ };
+
+ mipipll: mipipll {
#clock-cells = <0>;
- clock-frequency = <100000000>;
+ compatible = "brcm,cygnus-mipipll";
+ reg = <0x180a9800 0x2c>,
+ <0x0301c020 0x4>,
+ <0x180aa024 0x4>;
+ clock-frequency = <2100000000>;
+ clocks = <&osc>;
+ };
+
+ mipipll_clks: mipipll_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-mipipll-clk";
+ reg = <0x180a9800 0x2c>;
+ clocks = <&mipipll>;
+ clock-output-names = "ch0_unused", "ch1_lcd", "ch2_unused",
+ "ch3_unused", "ch4_unused", "ch5_unused";
+ };
+
+ asiu_clks: asiu_clks {
+ #clock-cells = <1>;
+ compatible = "brcm,cygnus-asiu-clk";
+ reg = <0x0301d048 0xc>,
+ <0x180aa024 0x4>;
+ clocks = <&osc>;
+ clock-output-names = "keypad", "adc/touch", "pwm";
};
};
diff --git a/arch/arm/boot/dts/bcm-cygnus.dtsi b/arch/arm/boot/dts/bcm-cygnus.dtsi
index 5126f9e..2b99e9c 100644
--- a/arch/arm/boot/dts/bcm-cygnus.dtsi
+++ b/arch/arm/boot/dts/bcm-cygnus.dtsi
@@ -134,7 +134,7 @@
compatible = "arm,cortex-a9-global-timer";
reg = <0x19020200 0x100>;
interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&periph_clk>;
+ clocks = <&arm_periph_clk>;
};
};
--
1.7.9.5
More information about the linux-arm-kernel
mailing list