[PATCH v2 2/5] ARM: shmobile: r8a7740: Migrate to generic l2c OF initialization

[Arnd Bergmann]

On Wednesday 04 February 2015 18:04:57 Geert Uytterhoeven wrote:
> On Wed, Feb 4, 2015 at 5:36 PM, Arnd Bergmann <arnd at arndb.de> wrote:
> > On Wednesday 04 February 2015 15:43:43 Geert Uytterhoeven wrote:
> >>
> >> Indeed. Note that I only try to preserve the register value before and after
> >> migrating to generic l2c OF initialization. I did read (part of) the pl310
> >> documentation, but it's still not clear to me if we really need
> >> L2C_AUX_CTRL_SHARED_OVERRIDE. Perhaps this was just copied from
> >> somewhere else without much afterthought?
> >
> > Have you checked what the hardware/bootloader actually sets in that bit?
> 
> Yes, it boots with 0x02040000, i.e. L2C_AUX_CTRL_SHARED_OVERRIDE
> (bit 22) is not set.
> 
> After the l2c driver is finished with it, it contains 0x46440001.

I see. I guess someone understand the effect of this flag.
Does it make a difference on the machine you are looking at?

I've read the spec at http://infocenter.arm.com/help/topic/com.arm.doc.ddi0246a/DDI0246A_l2cc_pl310_r0p0_trm.pdf
on the topic but couldn't make sense of it to understand whether a
particular setting might be required for specific hardware or might
be a performance optimization.

	Arnd