[PATCH] ARM: dts: rockchip: Adding LEDs handling via leds-gpio for the Radxa Rock2 Square

Heiko Stübner heiko at sntech.de
Wed Dec 30 07:20:10 PST 2015


Hi Romain,

Am Mittwoch, 30. Dezember 2015, 12:16:59 schrieb Romain Perier:

even a oneliner is generally preferred, compared to no commit message at all 
;-)

> Signed-off-by: Romain Perier <romain.perier at gmail.com>
> ---
>  arch/arm/boot/dts/rk3288-rock2-square.dts | 17 +++++++++++++++++
>  1 file changed, 17 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/rk3288-rock2-square.dts
> b/arch/arm/boot/dts/rk3288-rock2-square.dts index c5453a0..a33020f 100644
> --- a/arch/arm/boot/dts/rk3288-rock2-square.dts
> +++ b/arch/arm/boot/dts/rk3288-rock2-square.dts
> @@ -56,6 +56,23 @@
>  		pinctrl-0 = <&ir_int>;
>  	};
> 
> +	gpio-leds {
> +		compatible = "gpio-leds";
> +
> +		heartbeat {
> +			gpios = <&gpio7 15 GPIO_ACTIVE_LOW>;
> +			label = "rock2:green:heartbeat";
> +			linux,default-trigger = "heartbeat";
> +		};
> +
> +		mmc {
> +			gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
> +			label = "rock2:blue:mmc";
> +			linux,default-trigger = "mmc0";
> +		};

the rock2 core schematics seem to not list these leds at all (especially when 
looking at the gpio-side). But looking at the schematics my guess would be 
led_state1 and led_state2, so the naming should reflect that 
(rock2:green:state1 ...).

Also I'd like to refrain from encoding user-specific configurations in the 
devicetree - aka please do a default trigger of "off" for those generic leds.


Thanks
Heiko

> +	};
> +
> +
>  	sound {
>  		compatible = "simple-audio-card";
>  		simple-audio-card,name = "SPDIF";




More information about the linux-arm-kernel mailing list