[PATCH v4] arm64: dts: add all hi6220 i2c nodes

[Bintian]

On 2015/12/2 18:13, Xinwei Kong wrote:
> This patch adds all I2C nodes for the Hi6220 SoC. This hi6220 Soc
> use this I2C IP of Synopsys Designware for HiKey board.
>
> Signed-off-by: Xinwei Kong <kong.kongxinwei at hisilicon.com>
> Signed-off-by: Chen Feng <puck.chen at hisilicon.com>
> ---
>   arch/arm64/boot/dts/hisilicon/hi6220.dtsi | 34 +++++++++++++++++++++++++++++++
>   1 file changed, 34 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> index 82d2488..8cec56a 100644
> --- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> +++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
> @@ -208,5 +208,39 @@
>   			clock-names = "uartclk", "apb_pclk";
>   			status = "disabled";
>   		};
> +
> +		i2c0: i2c at f7100000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7100000 0x0 0x1000>;
> +			interrupts = <0 44 4>;
> +			clocks = <&sys_ctrl HI6220_I2C0_CLK>;
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c0_pmx_func &i2c0_cfg_func>;
> +			status = "disabled";
> +		};
> +
> +		i2c1: i2c at f7101000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7101000 0x0 0x1000>;
> +			clocks = <&sys_ctrl HI6220_I2C1_CLK>;
> +			interrupts = <0 45 4>;
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c1_pmx_func &i2c1_cfg_func>;
> +			status = "disabled";
> +		};
> +
> +		i2c2: i2c at f7102000 {
> +			compatible = "snps,designware-i2c";
> +			reg = <0x0 0xf7102000 0x0 0x1000>;
> +			clocks = <&sys_ctrl HI6220_I2C2_CLK>;
> +			interrupts = <0 46 4>;
> +			i2c-sda-hold-time-ns = <300>;
> +			pinctrl-names = "default";
> +			pinctrl-0 = <&i2c2_pmx_func &i2c2_cfg_func>;
> +			status = "disabled";
> +		};
> +
>   	};
>   };

Looks good to me!

Reviewed-by: Bintian Wang<bintian.wang at huawei.com>