[PATCH v11 09/19] phy: Add driver for rockchip Display Port PHY
Yakir Yang
ykk at rock-chips.com
Tue Dec 22 16:46:42 PST 2015
Hi Jingoo,
Thanks for your respond.
On 12/22/2015 08:20 PM, Jingoo Han wrote:
> On Wednesday, December 16, 2015 12:41 PM, Yakir Yang wrote:
>> Add phy driver for the Rockchip DisplayPort PHY module. This
>> is required to get DisplayPort working in Rockchip SoCs.
>>
>> Signed-off-by: Yakir Yang <ykk at rock-chips.com>
>> Reviewed-by: Heiko Stuebner <heiko at sntech.de>
>> ---
>> Changes in v11: None
>> Changes in v10:
>> - Fix the wrong macro value of GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK
>> BIT(4) -> BIT(20)
>>
>> Changes in v9:
>> - Removed the unused the variable "res" in probe function. (Heiko)
>> - Removed the unused head file.
>>
>> Changes in v8:
>> - Fix the mixed spacers on macro definitions. (Heiko)
>> - Remove the unnecessary empty line after clk_prepare_enable. (Heiko)
>>
>> Changes in v7:
>> - Simply the commit message. (Kishon)
>> - Symmetrical enable/disbale the phy clock and power. (Kishon)
>>
>> Changes in v6: None
>> Changes in v5:
>> - Remove "reg" DT property, cause driver could poweron/poweroff phy via
>> the exist "grf" syscon already. And rename the example DT node from
>> "edp_phy: phy at ff770274" to "edp_phy: edp-phy" directly. (Heiko)
>> - Add deivce_node at the front of driver, update phy_ops type from "static
>> struct" to "static const struct". And correct the input paramters of
>> devm_phy_create() interfaces. (Heiko)
>>
>> Changes in v4:
>> - Add commit message, and remove the redundant rockchip_dp_phy_init()
>> function, move those code to probe() method. And remove driver .owner
>> number. (Kishon)
>>
>> Changes in v3:
>> - Suggest, add rockchip dp phy driver, collect the phy clocks and
>> power control. (Heiko)
>>
>> Changes in v2: None
>>
>> drivers/phy/Kconfig | 7 ++
>> drivers/phy/Makefile | 1 +
>> drivers/phy/phy-rockchip-dp.c | 151 ++++++++++++++++++++++++++++++++++++++++++
>> 3 files changed, 159 insertions(+)
>> create mode 100644 drivers/phy/phy-rockchip-dp.c
>>
>> diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig
>> index 7eb5859d..7355819 100644
>> --- a/drivers/phy/Kconfig
>> +++ b/drivers/phy/Kconfig
>> @@ -319,6 +319,13 @@ config PHY_ROCKCHIP_USB
>> help
>> Enable this to support the Rockchip USB 2.0 PHY.
>>
>> +config PHY_ROCKCHIP_DP
>> + tristate "Rockchip Display Port PHY Driver"
>> + depends on ARCH_ROCKCHIP && OF
>> + select GENERIC_PHY
>> + help
>> + Enable this to support the Rockchip Display Port PHY.
>> +
>> config PHY_ST_SPEAR1310_MIPHY
>> tristate "ST SPEAR1310-MIPHY driver"
>> select GENERIC_PHY
>> diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile
>> index 075db1a..b1700cd 100644
>> --- a/drivers/phy/Makefile
>> +++ b/drivers/phy/Makefile
>> @@ -35,6 +35,7 @@ phy-exynos-usb2-$(CONFIG_PHY_S5PV210_USB2) += phy-s5pv210-usb2.o
>> obj-$(CONFIG_PHY_EXYNOS5_USBDRD) += phy-exynos5-usbdrd.o
>> obj-$(CONFIG_PHY_QCOM_APQ8064_SATA) += phy-qcom-apq8064-sata.o
>> obj-$(CONFIG_PHY_ROCKCHIP_USB) += phy-rockchip-usb.o
>> +obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o
>> obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
>> obj-$(CONFIG_PHY_ST_SPEAR1310_MIPHY) += phy-spear1310-miphy.o
>> obj-$(CONFIG_PHY_ST_SPEAR1340_MIPHY) += phy-spear1340-miphy.o
>> diff --git a/drivers/phy/phy-rockchip-dp.c b/drivers/phy/phy-rockchip-dp.c
>> new file mode 100644
>> index 0000000..3cb3bf8
>> --- /dev/null
>> +++ b/drivers/phy/phy-rockchip-dp.c
>> @@ -0,0 +1,151 @@
>> +/*
>> + * Rockchip DP PHY driver
>> + *
>> + * Copyright (C) 2015 FuZhou Rockchip Co., Ltd.
>> + * Author: Yakir Yang <ykk@@rock-chips.com>
>> + *
>> + * This program is free software; you can redistribute it and/or modify
>> + * it under the terms of the GNU General Public License as published by
>> + * the Free Software Foundation; either version 2 of the License.
>> + */
>> +
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/clk.h>
>> +#include <linux/phy/phy.h>
>> +#include <linux/regmap.h>
>> +#include <linux/mfd/syscon.h>
>> +#include <linux/platform_device.h>
> Please order these headers alphabetically.
> It will enhance the readability.
Done,
Thanks,
- Yakir
> Best regards,
> Jingoo Han
>
>> +
>> +#define GRF_SOC_CON12 0x0274
>> +
>> +#define GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK BIT(20)
>> +#define GRF_EDP_REF_CLK_SEL_INTER BIT(4)
>> +
>> +#define GRF_EDP_PHY_SIDDQ_HIWORD_MASK BIT(21)
>> +#define GRF_EDP_PHY_SIDDQ_ON 0
>> +#define GRF_EDP_PHY_SIDDQ_OFF BIT(5)
>> +
>> +struct rockchip_dp_phy {
>> + struct device *dev;
>> + struct regmap *grf;
>> + struct clk *phy_24m;
>> +};
>> +
>> +static int rockchip_set_phy_state(struct phy *phy, bool enable)
>> +{
>> + struct rockchip_dp_phy *dp = phy_get_drvdata(phy);
>> + int ret;
>> +
>> + if (enable) {
>> + ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> + GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
>> + GRF_EDP_PHY_SIDDQ_ON);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "Can't enable PHY power %d\n", ret);
>> + return ret;
>> + }
>> +
>> + ret = clk_prepare_enable(dp->phy_24m);
>> + } else {
>> + clk_disable_unprepare(dp->phy_24m);
>> +
>> + ret = regmap_write(dp->grf, GRF_SOC_CON12,
>> + GRF_EDP_PHY_SIDDQ_HIWORD_MASK |
>> + GRF_EDP_PHY_SIDDQ_OFF);
>> + }
>> +
>> + return ret;
>> +}
>> +
>> +static int rockchip_dp_phy_power_on(struct phy *phy)
>> +{
>> + return rockchip_set_phy_state(phy, true);
>> +}
>> +
>> +static int rockchip_dp_phy_power_off(struct phy *phy)
>> +{
>> + return rockchip_set_phy_state(phy, false);
>> +}
>> +
>> +static const struct phy_ops rockchip_dp_phy_ops = {
>> + .power_on = rockchip_dp_phy_power_on,
>> + .power_off = rockchip_dp_phy_power_off,
>> + .owner = THIS_MODULE,
>> +};
>> +
>> +static int rockchip_dp_phy_probe(struct platform_device *pdev)
>> +{
>> + struct device *dev = &pdev->dev;
>> + struct device_node *np = dev->of_node;
>> + struct phy_provider *phy_provider;
>> + struct rockchip_dp_phy *dp;
>> + struct phy *phy;
>> + int ret;
>> +
>> + if (!np)
>> + return -ENODEV;
>> +
>> + dp = devm_kzalloc(dev, sizeof(*dp), GFP_KERNEL);
>> + if (IS_ERR(dp))
>> + return -ENOMEM;
>> +
>> + dp->dev = dev;
>> +
>> + dp->phy_24m = devm_clk_get(dev, "24m");
>> + if (IS_ERR(dp->phy_24m)) {
>> + dev_err(dev, "cannot get clock 24m\n");
>> + return PTR_ERR(dp->phy_24m);
>> + }
>> +
>> + ret = clk_set_rate(dp->phy_24m, 24000000);
>> + if (ret < 0) {
>> + dev_err(dp->dev, "cannot set clock phy_24m %d\n", ret);
>> + return ret;
>> + }
>> +
>> + dp->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,grf");
>> + if (IS_ERR(dp->grf)) {
>> + dev_err(dev, "rk3288-dp needs rockchip,grf property\n");
>> + return PTR_ERR(dp->grf);
>> + }
>> +
>> + ret = regmap_write(dp->grf, GRF_SOC_CON12, GRF_EDP_REF_CLK_SEL_INTER |
>> + GRF_EDP_REF_CLK_SEL_INTER_HIWORD_MASK);
>> + if (ret != 0) {
>> + dev_err(dp->dev, "Could not config GRF edp ref clk: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + phy = devm_phy_create(dev, np, &rockchip_dp_phy_ops);
>> + if (IS_ERR(phy)) {
>> + dev_err(dev, "failed to create phy\n");
>> + return PTR_ERR(phy);
>> + }
>> + phy_set_drvdata(phy, dp);
>> +
>> + phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate);
>> +
>> + return PTR_ERR_OR_ZERO(phy_provider);
>> +}
>> +
>> +static const struct of_device_id rockchip_dp_phy_dt_ids[] = {
>> + { .compatible = "rockchip,rk3288-dp-phy" },
>> + {}
>> +};
>> +
>> +MODULE_DEVICE_TABLE(of, rockchip_dp_phy_dt_ids);
>> +
>> +static struct platform_driver rockchip_dp_phy_driver = {
>> + .probe = rockchip_dp_phy_probe,
>> + .driver = {
>> + .name = "rockchip-dp-phy",
>> + .of_match_table = rockchip_dp_phy_dt_ids,
>> + },
>> +};
>> +
>> +module_platform_driver(rockchip_dp_phy_driver);
>> +
>> +MODULE_AUTHOR("Yakir Yang <ykk at rock-chips.com>");
>> +MODULE_DESCRIPTION("Rockchip DP PHY driver");
>> +MODULE_LICENSE("GPL v2");
>> --
>> 1.9.1
>>
>
>
>
>
More information about the linux-arm-kernel
mailing list