[PATCH 3/3] drivers: net: cpsw: use of_phy_connect() in fixed-link case

[David Rivshin (Allworx)]

From: David Rivshin <drivshin at allworx.com>

If a fixed-link DT subnode is used, the phy_device was looked up so
that a PHY ID string could be constructed and passed to phy_connect().
This is not necessary, as the device_node can be passed directly to
of_phy_connect() instead. This reuses the same codepath as if the
phy-handle DT property was used.

Signed-off-by: David Rivshin <drivshin at allworx.com>
---
 drivers/net/ethernet/ti/cpsw.c | 10 +---------
 1 file changed, 1 insertion(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/ti/cpsw.c b/drivers/net/ethernet/ti/cpsw.c
index f9029e7..94b818c 100644
--- a/drivers/net/ethernet/ti/cpsw.c
+++ b/drivers/net/ethernet/ti/cpsw.c
@@ -2038,29 +2038,21 @@ static int cpsw_probe_dt(struct cpsw_platform_data *data,
 							"phy-handle", 0);
 		parp = of_get_property(slave_node, "phy_id", &lenp);
 		if (slave_data->phy_node) {
 			dev_dbg(&pdev->dev,
 				"slave[%d] using phy-handle=\"%s\"\n",
 				i, slave_data->phy_node->full_name);
 		} else if (of_phy_is_fixed_link(slave_node)) {
-			struct device_node *phy_node;
-			struct phy_device *phy_dev;
-
 			/* In the case of a fixed PHY, the DT node associated
 			 * to the PHY is the Ethernet MAC DT node.
 			 */
 			ret = of_phy_register_fixed_link(slave_node);
 			if (ret)
 				return ret;
-			phy_node = of_node_get(slave_node);
-			phy_dev = of_phy_find_device(phy_node);
-			if (!phy_dev)
-				return -ENODEV;
-			snprintf(slave_data->phy_id, sizeof(slave_data->phy_id),
-				 PHY_ID_FMT, phy_dev->bus->id, phy_dev->addr);
+			slave_data->phy_node = of_node_get(slave_node);
 		} else if (parp) {
 			u32 phyid;
 			struct device_node *mdio_node;
 			struct platform_device *mdio;
 
 			if (lenp != (sizeof(__be32) * 2)) {
 				dev_err(&pdev->dev, "Invalid slave[%d] phy_id property\n", i);
-- 
2.5.0