[PATCH 0/3] drivers: net: cpsw: phy-handle fixes

[David Rivshin (Allworx)]

From: David Rivshin <drivshin at allworx.com>

This series is based on the tip of the net tree.

The first patch fixes a bug that makes dual_emac mode break if
either slave uses the phy-handle property in the devicetree.

The second patch fixes some cosmetic problems with error messages,
and also makes the binding documentation more explicit.

The third patch cleans up the fixed-link case to work like
the now-fixed phy-handle case.

I have tested on the following hardware configurations:
 - (EVMSK) dual emac, phy_id property in both slaves
 - (BeagleBoneBlack) single emac, phy_id property
 - (custom) single emac, fixed-link subnode
Note that I don't have a board which would uses a phy-handle property,
though I have used hacked devicetrees to exercise the code paths.
Testing by anyone who has real hardware using phy-handle or dual_emac
with fixed-link would be appreciated.

David Rivshin (3):
  drivers: net: cpsw: fix parsing of phy-handle DT property in dual_emac
    config
  drivers: net: cpsw: fix error messages when using phy-handle DT
    property
  drivers: net: cpsw: use of_phy_connect() in fixed-link case

 Documentation/devicetree/bindings/net/cpsw.txt |  4 +--
 drivers/net/ethernet/ti/cpsw.c                 | 40 +++++++++++++-------------
 drivers/net/ethernet/ti/cpsw.h                 |  1 +
 3 files changed, 23 insertions(+), 22 deletions(-)

-- 
2.5.0