[PATCH 0/2] pci: Add host controller driver for Cavium ThunderX PCIe

[David Daney]

From: David Daney <david.daney at cavium.com>

Some Cavium ThunderX processors require quirky access methods for the
config space of the PCIe bridge.

There are two patches:

1) Refactor code in pci-host-generic so that it can more easily be
   used by other drivers.

2) Add the ThunderX PCIe driver, which leverages the code in
   pci-host-generic

David Daney (2):
  PCI: generic: Refactor code to enable reuse by other drivers.
  pci, pcie-thunder-pem: Add PCIe host driver for ThunderX processors.

 .../devicetree/bindings/pci/pcie-thunder-pem.txt   |  43 ++++
 drivers/pci/host/Kconfig                           |   6 +
 drivers/pci/host/Makefile                          |   1 +
 drivers/pci/host/pci-host-generic.c                |  53 ++--
 drivers/pci/host/pci-host-generic.h                |  56 ++++
 drivers/pci/host/pcie-thunder-pem.c                | 283 +++++++++++++++++++++
 6 files changed, 407 insertions(+), 35 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pci/pcie-thunder-pem.txt
 create mode 100644 drivers/pci/host/pci-host-generic.h
 create mode 100644 drivers/pci/host/pcie-thunder-pem.c

-- 
1.8.3.1