[linux-sunxi][PATCH v2 3/5] ARM: dts: sun7i: Add Itead Ibox support

[Chen-Yu Tsai]

On Sat, Dec 19, 2015 at 11:05 PM,  <codekipper at gmail.com> wrote:
> From: Marcus Cooper <codekipper at gmail.com>
>
> The Itead Ibox is a multi board device based on the Allwinner A20 SoC.
> It contains the A20 Itead Core module and a base board for the external
> interfaces.
>
> The core module comes with 4GB NAND and 1GB DDR RAM.
>
> The base board to which the core board is connected provides 3 USB 2.0 Host
> ports, 1 USB 2.0 OTG, 1 uSD slot, 10/100 Ethernet port, HDMI, IR receiver,
> SPDIF and a 32-pin GPIO header. This header expands the features of core
> board by exposing the VGA pins, audio In/Out pins, SATA, SPI, I2C, UARTS,
> USB-OTG and power.
>
> Signed-off-by: Marcus Cooper <codekipper at gmail.com>

Acked-by: Chen-Yu Tsai <wens at csie.org>