[PATCH 4/4] ARM: mvebu: use the ARMADA_370_XP_IRQ option

Thomas Petazzoni thomas.petazzoni at free-electrons.com
Mon Dec 21 06:19:06 PST 2015


Now that there is a ARMADA_370_XP_IRQ option to enable the irqchip
driver for Armada 370, XP, 375, 38x and 39x, let's select this option
when needed. Note that this selection is currently not mandatory
because ARMADA_370_XP_IRQ is for now always enabled when ARCH_MVEBU=y,
but this is something that we will change in the future, and therefore
we should make the relevant platforms select ARMADA_370_XP_IRQ when
needed.

Due to this, selecting GENERIC_IRQ_CHIP is no longer needed.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
---
 arch/arm/mach-mvebu/Kconfig | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig
index e20fc41..d071080 100644
--- a/arch/arm/mach-mvebu/Kconfig
+++ b/arch/arm/mach-mvebu/Kconfig
@@ -2,7 +2,6 @@ menuconfig ARCH_MVEBU
 	bool "Marvell Engineering Business Unit (MVEBU) SoCs" if (ARCH_MULTI_V7 || ARCH_MULTI_V5)
 	select ARCH_SUPPORTS_BIG_ENDIAN
 	select CLKSRC_MMIO
-	select GENERIC_IRQ_CHIP
 	select PINCTRL
 	select PLAT_ORION
 	select SOC_BUS
@@ -27,6 +26,7 @@ config MACH_MVEBU_V7
 config MACH_ARMADA_370
 	bool "Marvell Armada 370 boards" if ARCH_MULTI_V7
 	select ARMADA_370_CLK
+	select ARMADA_370_XP_IRQ
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
 	select PINCTRL_ARMADA_370
@@ -36,6 +36,7 @@ config MACH_ARMADA_370
 
 config MACH_ARMADA_375
 	bool "Marvell Armada 375 boards" if ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
@@ -54,6 +55,7 @@ config MACH_ARMADA_38X
 	select ARM_ERRATA_720789
 	select ARM_ERRATA_753970
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_38X_CLK
 	select HAVE_ARM_SCU
 	select HAVE_ARM_TWD if SMP
@@ -67,6 +69,7 @@ config MACH_ARMADA_38X
 config MACH_ARMADA_39X
 	bool "Marvell Armada 39x boards" if ARCH_MULTI_V7
 	select ARM_GIC
+	select ARMADA_370_XP_IRQ
 	select ARMADA_39X_CLK
 	select CACHE_L2X0
 	select HAVE_ARM_SCU
@@ -80,6 +83,7 @@ config MACH_ARMADA_39X
 
 config MACH_ARMADA_XP
 	bool "Marvell Armada XP boards" if ARCH_MULTI_V7
+	select ARMADA_370_XP_IRQ
 	select ARMADA_XP_CLK
 	select CPU_PJ4B
 	select MACH_MVEBU_V7
-- 
2.6.4




More information about the linux-arm-kernel mailing list