[PATCH V3] ARM: dts: imx6q-icore-rqs: Add Engicam IMX6 Q7 initial support
Shawn Guo
shawnguo at kernel.org
Sun Dec 20 22:12:31 PST 2015
On Wed, Dec 16, 2015 at 07:12:05PM +0100, Michael Trimarchi wrote:
> Hi
>
> I have address most of the changes but I have problem when I remove
> the group of pinctrl as you suggest
...
> > > > +&iomuxc {
> > >
> > > Suggest move iomuxc node to the bottom to make the file a bit easier to
> > > read.
> > >
> >
> > Ok
> >
> >
> > > > + imx6qdl-icore-rqs {
> > > > +
> > >
> > > With commit 5fcdf6a7ed95 (pinctrl: imx: Allow parsing DT without function
> > > nodes) in place, we can now save this container.
> > >
>
> If I save this I can not register usb. Group is not found
>
> [ 2.768476] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node usdhc1grp-1
> [ 2.768844] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node usdhc1grp-1
> [ 2.768932] sdhci-esdhc-imx: probe of 2190000.usdhc failed with error -22
> [ 2.768994] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node usdhc3grp-2
> [ 2.769240] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node usdhc3grp-2
> [ 2.769322] sdhci-esdhc-imx: probe of 2198000.usdhc failed with error -22
> [ 2.769381] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node usdhc4grp-1
> [ 2.769621] imx6q-pinctrl 20e0000.iomuxc: unable to find group for node usdhc4grp-1
> [ 2.769701] sdhci-esdhc-imx: probe of 219c000.usdhc failed with error -22
I'm not sure if you got my comment correct, but what I meant is
something like below.
&iomuxc {
pinctrl_audmux_4: audmux-4 {
fsl,pins = <
MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x110b0
MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
>;
};
pinctrl_enet_3: enetgrp-3 {
fsl,pins = <
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
MX6QDL_PAD_ENET_TX_EN__ENET_TX_EN 0x1b0b0
>;
};
......
};
Is this what you did?
Shawn
More information about the linux-arm-kernel
mailing list