[PATCH v2 0/3] drivers: net: cpsw: Fix bugs in fixed-link PHY DT parsing
David Rivshin (Allworx)
drivshin.allworx at gmail.com
Fri Dec 18 14:06:31 PST 2015
On Fri, 18 Dec 2015 11:20:21 +0100
Daniel Trautmann <dtrautmann at ibhsoftec.com> wrote:
> On Thu, Dec 17, 2015 at 03:45:08PM -0500, David Miller wrote:
> > From: "David Rivshin (Allworx)" <drivshin.allworx at gmail.com>
> > Date: Wed, 16 Dec 2015 23:02:08 -0500
> > > I have tested on the following hardware configurations:
> > > - (EVMSK) dual emac with two real MDIO-connected phys using
> > > RGMII-TXID
> > > - single emac with fixed-link using RGMII
> > > Testing of other CPSW emac configurations that folks may have
> > > would be appreciated.
> > I'm going to wait until some others give some feedback and testing
> > results on this one, thanks.
> I can confirm that this patch is working on the following hardware
> - single emac using MII connected with fixed-link to Micrel KSZ8895
Thanks for testing.
I see that Dave applied the series, but just for good measure I'll
report that I also tested on:
- (BeagleBone-Black) single emac, MII, real 100Mbit PHY
More information about the linux-arm-kernel