[PATCH 0/2] ARM: shmobile: gose: Add GPIO keys and leds to DT

[Simon Horman]

On Thu, Dec 17, 2015 at 12:53:12PM +0900, Magnus Damm wrote:
> Hi Simon,
> 
> On Thu, Nov 19, 2015 at 7:20 AM, Simon Horman
> <horms+renesas at verge.net.au> wrote:
> > Hi,
> >
> > this short series adds GPIO keys and leds to the device tree
> > of the r8a7793 based Gose board.
> >
> > It uses the makes use of the recently addition of GPIO devices
> > to the device tree of the r8a7793. Thanks Magnus!
> >
> > I have booted a system with these changes and verified that the
> > relevant entries appear to be present in sysfs.
> >
> > I have not tested button press events or illumination of the leds
> > as I do not currently have physical access to a Gose board.
> >
> > Based on renesas-devel-20151118-v4.4-rc1
> >
> > Simon Horman (2):
> >   ARM: shmobile: gose: Add GPIO keys to DT
> >   ARM: shmobile: gose: Add GPIO leds to DT
> >
> >  arch/arm/boot/dts/r8a7793-gose.dts | 98 ++++++++++++++++++++++++++++++++++++++
> >  1 file changed, 98 insertions(+)
> 
> Thanks a lot for these patches! Very useful as basic a test
> environment for the r8a7793 GPIO device nodes.
> 
> So I've now managed to test the GPIO keys and LED devices on a
> physical Gose board. The LED6 -> LED 8 entries will be lit as expected
> by controlling brightness in /sys/class/leds/. The GPIO keys
> associated with buttons SW30 to SW36 and the dip switch SW2 all
> generate interrupts in /proc/interrupts on key press or dip switch
> change. All good!
> 
> Please queue up these changes. Feel free to add:
> 
> Tested-by: Magnus Damm <damm+renesas at opensource.se>

Thanks, I have queued these up for v4.6.