[PATCH v4 5/5] ARM: dts: ifc6410: enable pcie dt node for this board

[Bjorn Andersson]

On Thu 03 Dec 05:35 PST 2015, Stanimir Varbanov wrote:

> Enable pcie dt node and fill pcie dt node with regulator, pinctrl
> and reset gpio, to use the pcie on the ifc6410 board.
> 
> Signed-off-by: Stanimir Varbanov <stanimir.varbanov at linaro.org>
> ---
>  arch/arm/boot/dts/qcom-apq8064-ifc6410.dts |   26 ++++++++++++++++++++++++++
>  1 file changed, 26 insertions(+)
> 
> diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
> index 11ac608b6d50..f203b94ee460 100644
> --- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
> +++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
> @@ -47,6 +47,18 @@
>  					bias-disable;
>  				};
>  			};
> +
> +			pcie_pins: pcie_pinmux {
> +				mux {
> +					pins = "gpio27";
> +					function = "gpio";
> +				};
> +				conf {
> +					pins = "gpio27";
> +					drive-strength = <12>;
> +					bias-disable;
> +				};
> +			};
>  		};
>  
>  		rpm at 108000 {
> @@ -123,6 +135,10 @@
>  				pm8921_lvs1: lvs1 {
>  					bias-pull-down;
>  				};
> +
> +				pm8921_lvs6: lvs6 {
> +					bias-pull-down;
> +				};

Please don't duplicate the labels in the dts files.

>  			};
>  		};
>  

Regards,
Bjorn