[PATCH v10 3/4] irqchip:create irq domain for each mbigen device

MaJun majun258 at huawei.com
Thu Dec 17 03:56:36 PST 2015


From: Ma Jun <majun258 at huawei.com>

For peripheral devices which connect to mbigen,mbigen is a interrupt
controller. So, we create irq domain for each mbigen device and add
mbigen irq domain into irq hierarchy structure.

Signed-off-by: Ma Jun <majun258 at huawei.com>
---
 drivers/irqchip/irq-mbigen.c |  138 ++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 138 insertions(+), 0 deletions(-)

diff --git a/drivers/irqchip/irq-mbigen.c b/drivers/irqchip/irq-mbigen.c
index 9f036c2..98865b1 100644
--- a/drivers/irqchip/irq-mbigen.c
+++ b/drivers/irqchip/irq-mbigen.c
@@ -16,13 +16,39 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  */
 
+#include <linux/interrupt.h>
+#include <linux/irqchip.h>
 #include <linux/module.h>
+#include <linux/msi.h>
 #include <linux/of_address.h>
 #include <linux/of_irq.h>
 #include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 
+/* Interrupt numbers per mbigen node supported */
+#define IRQS_PER_MBIGEN_NODE		128
+
+/* 64 irqs (Pin0-pin63) are reserved for each mbigen chip */
+#define RESERVED_IRQ_PER_MBIGEN_CHIP	64
+
+/* The maximum IRQ pin number of mbigen chip(start from 0) */
+#define MAXIMUM_IRQ_PIN_NUM		1407
+
+/**
+ * In mbigen vector register
+ * bit[21:12]:	event id value
+ * bit[11:0]:	device id
+ */
+#define IRQ_EVENT_ID_SHIFT		12
+#define IRQ_EVENT_ID_MASK		0x3ff
+
+/* register range of each mbigen node */
+#define MBIGEN_NODE_OFFSET		0x1000
+
+/* offset of vector register in mbigen node */
+#define REG_MBIGEN_VEC_OFFSET		0x200
+
 /**
  * struct mbigen_device - holds the information of mbigen device.
  *
@@ -34,10 +60,107 @@ struct mbigen_device {
 	void __iomem		*base;
 };
 
+static inline unsigned int get_mbigen_vec_reg(irq_hw_number_t hwirq)
+{
+	unsigned int nid, pin;
+
+	hwirq -= RESERVED_IRQ_PER_MBIGEN_CHIP;
+	nid = hwirq / IRQS_PER_MBIGEN_NODE + 1;
+	pin = hwirq % IRQS_PER_MBIGEN_NODE;
+
+	return pin * 4 + nid * MBIGEN_NODE_OFFSET
+			+ REG_MBIGEN_VEC_OFFSET;
+}
+
+static struct irq_chip mbigen_irq_chip = {
+	.name =			"mbigen-v2",
+};
+
+static void mbigen_write_msg(struct msi_desc *desc, struct msi_msg *msg)
+{
+	struct irq_data *d = irq_get_irq_data(desc->irq);
+	void __iomem *base = d->chip_data;
+	u32 val;
+
+	base += get_mbigen_vec_reg(d->hwirq);
+	val = readl_relaxed(base);
+
+	val &= ~(IRQ_EVENT_ID_MASK << IRQ_EVENT_ID_SHIFT);
+	val |= (msg->data << IRQ_EVENT_ID_SHIFT);
+
+	/* The address of doorbell is encoded in mbigen register by default
+	 * So,we don't need to program the doorbell address at here
+	 */
+	writel_relaxed(val, base);
+}
+
+static int mbigen_domain_translate(struct irq_domain *d,
+				    struct irq_fwspec *fwspec,
+				    unsigned long *hwirq,
+				    unsigned int *type)
+{
+	if (is_of_node(fwspec->fwnode)) {
+		if (fwspec->param_count != 2)
+			return -EINVAL;
+
+		if ((fwspec->param[0] > MAXIMUM_IRQ_PIN_NUM) ||
+			(fwspec->param[0] < RESERVED_IRQ_PER_MBIGEN_CHIP))
+			return -EINVAL;
+		else
+			*hwirq = fwspec->param[0];
+
+		/* If there is no valid irq type, just use the default type */
+		if ((fwspec->param[1] == IRQ_TYPE_EDGE_RISING) ||
+			(fwspec->param[1] == IRQ_TYPE_LEVEL_HIGH))
+			*type = fwspec->param[1];
+		else
+			*type = IRQ_TYPE_NONE;
+
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int mbigen_irq_domain_alloc(struct irq_domain *domain,
+					unsigned int virq,
+					unsigned int nr_irqs,
+					void *args)
+{
+	struct irq_fwspec *fwspec = args;
+	irq_hw_number_t hwirq;
+	unsigned int type;
+	struct mbigen_device *mgn_chip;
+	int i, err;
+
+	err = mbigen_domain_translate(domain, fwspec, &hwirq, &type);
+	if (err)
+		return err;
+
+	err = platform_msi_domain_alloc(domain, virq, nr_irqs);
+	if (err)
+		return err;
+
+	mgn_chip = platform_msi_get_host_data(domain);
+
+	for (i = 0; i < nr_irqs; i++)
+		irq_domain_set_hwirq_and_chip(domain, virq + i, hwirq + i,
+				      &mbigen_irq_chip, mgn_chip->base);
+
+	return 0;
+}
+
+static struct irq_domain_ops mbigen_domain_ops = {
+	.translate	= mbigen_domain_translate,
+	.alloc		= mbigen_irq_domain_alloc,
+	.free		= irq_domain_free_irqs_common,
+};
+
 static int mbigen_device_probe(struct platform_device *pdev)
 {
 	struct mbigen_device *mgn_chip;
 	struct resource *res;
+	struct irq_domain *domain;
+	u32 num_msis;
 
 	mgn_chip = devm_kzalloc(&pdev->dev, sizeof(*mgn_chip), GFP_KERNEL);
 	if (!mgn_chip)
@@ -50,8 +173,23 @@ static int mbigen_device_probe(struct platform_device *pdev)
 	if (IS_ERR(mgn_chip->base))
 		return PTR_ERR(mgn_chip->base);
 
+	if (of_property_read_u32(pdev->dev.of_node, "num-msis", &num_msis) < 0) {
+		dev_err(&pdev->dev, "No num-msis property\n");
+		return -EINVAL;
+	}
+
+	domain = platform_msi_create_device_domain(&pdev->dev, num_msis,
+							mbigen_write_msg,
+							&mbigen_domain_ops,
+							mgn_chip);
+
+	if (!domain)
+		return -ENOMEM;
+
 	platform_set_drvdata(pdev, mgn_chip);
 
+	dev_info(&pdev->dev, "Probing ok, allocated %d MSIs\n", num_msis);
+
 	return 0;
 }
 
-- 
1.7.1





More information about the linux-arm-kernel mailing list