[PATCH v4 4/4] ARM: bcm2835: Add the Raspberry Pi power domain driver to the DT.

Eric Anholt eric at anholt.net
Wed Dec 16 16:26:49 PST 2015


From: Alexander Aring <alex.aring at gmail.com>

This connects the USB driver to the USB power domain, so that USB can
actually be turned on at boot if the bootloader didn't do it for us.

Signed-off-by: Alexander Aring <alex.aring at gmail.com>
Signed-off-by: Eric Anholt <eric at anholt.net>
---
 arch/arm/boot/dts/bcm2835-rpi.dtsi | 11 +++++++++++
 arch/arm/boot/dts/bcm2835.dtsi     |  2 +-
 2 files changed, 12 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi
index 3572f03..7982d22 100644
--- a/arch/arm/boot/dts/bcm2835-rpi.dtsi
+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi
@@ -1,3 +1,4 @@
+#include <dt-bindings/soc/raspberrypi-power.h>
 #include "bcm2835.dtsi"
 
 / {
@@ -20,6 +21,12 @@
 			compatible = "raspberrypi,bcm2835-firmware";
 			mboxes = <&mailbox>;
 		};
+
+		power: power {
+			compatible = "raspberrypi,bcm2835-power";
+			firmware = <&firmware>;
+			#power-domain-cells = <1>;
+		};
 	};
 };
 
@@ -60,3 +67,7 @@
 	status = "okay";
 	bus-width = <4>;
 };
+
+&usb {
+	power-domains = <&power RPI_POWER_DOMAIN_USB>;
+};
diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi
index aef64de..6d62af0 100644
--- a/arch/arm/boot/dts/bcm2835.dtsi
+++ b/arch/arm/boot/dts/bcm2835.dtsi
@@ -177,7 +177,7 @@
 			status = "disabled";
 		};
 
-		usb at 7e980000 {
+		usb: usb at 7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;
 			interrupts = <1 9>;
-- 
2.6.2




More information about the linux-arm-kernel mailing list