[PATCH v6 3/3] arm64: dts: mt8173: Add dynamic power node.

[Dawei Chien]

This device node is for calculating dynamic power in mW.
Since mt8173 has two clusters, there are two dynamic power
coefficient as well.

Signed-off-by: Dawei Chien <dawei.chien at mediatek.com>
---
This patch is base on patchset:
https://lkml.org/lkml/2015/11/17/251
---
 arch/arm64/boot/dts/mediatek/mt8173.dtsi |    4 ++++
 1 file changed, 4 insertions(+)

diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
index c962d94..b6f4ea5 100644
--- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
@@ -71,6 +71,7 @@
 			#cooling-cells = <2>;
 			#cooling-min-level = <0>;
 			#cooling-max-level = <7>;
+			dynamic-power-coefficient = <263>;
 		};
 
 		cpu1: cpu at 1 {
@@ -95,6 +96,7 @@
 			#cooling-cells = <2>;
 			#cooling-min-level = <0>;
 			#cooling-max-level = <7>;
+			dynamic-power-coefficient = <263>;
 		};
 
 		cpu2: cpu at 100 {
@@ -119,6 +121,7 @@
 			#cooling-cells = <2>;
 			#cooling-min-level = <0>;
 			#cooling-max-level = <7>;
+			dynamic-power-coefficient = <530>;
 		};
 
 		cpu3: cpu at 101 {
@@ -143,6 +146,7 @@
 			#cooling-cells = <2>;
 			#cooling-min-level = <0>;
 			#cooling-max-level = <7>;
+			dynamic-power-coefficient = <530>;
 		};
 
 		idle-states {
-- 
1.7.9.5