[PATCH 2/5] clk: rockchip: rk3036: enable the CLK_IGNORE_UNUSED flag for aclk_vio

[Caesar Wang]

From: Yakir Yang <ykk at rock-chips.com>

ACLK_VIO is the noc bus clock for display module, display cann't
read data from ddr without this clock enabled.

Due to it shouldn't belong to any driver, but we need it enabled,
so just mark it as the CLK_IGNORE_UNUSED flag.

Signed-off-by: Yakir Yang <ykk at rock-chips.com>
Signed-off-by: Caesar Wang <wxt at rock-chips.com>
---

 drivers/clk/rockchip/clk-rk3036.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index dc01a2a..b2cb5af 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -358,7 +358,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 	GATE(PCLK_HDMI, "pclk_hdmi", "pclk_cpu", 0, RK2928_CLKGATE_CON(3), 8, GFLAGS),
 
 	/* aclk_vio gates */
-	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", 0, RK2928_CLKGATE_CON(6), 13, GFLAGS),
+	GATE(ACLK_VIO, "aclk_vio", "aclk_disp1_pre", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(6), 13, GFLAGS),
 	GATE(ACLK_LCDC, "aclk_lcdc", "aclk_disp1_pre", 0, RK2928_CLKGATE_CON(9), 6, GFLAGS),
 
 	GATE(HCLK_VIO_BUS, "hclk_vio_bus", "hclk_disp_pre", 0, RK2928_CLKGATE_CON(6), 12, GFLAGS),
-- 
1.9.1