[PATCH v6 3/5] memory: mediatek: Add SMI driver
Yong Wu
yong.wu at mediatek.com
Tue Dec 15 22:00:47 PST 2015
On Tue, 2015-12-15 at 13:45 +0800, Daniel Kurtz wrote:
> Hi Yong,
>
> On Tue, Dec 15, 2015 at 10:38 AM, Yong Wu <yong.wu at mediatek.com> wrote:
> > On Mon, 2015-12-14 at 19:18 +0100, Matthias Brugger wrote:
> >> On Tuesday 08 Dec 2015 17:49:11 Yong Wu wrote:
> >> > This patch add SMI(Smart Multimedia Interface) driver. This driver
> >> > is responsible to enable/disable iommu and control the power domain
> >> > and clocks of each local arbiter.
> >> >
> >> > Signed-off-by: Yong Wu <yong.wu at mediatek.com>
> >> > ---
> >> > Currently SMI offer mtk_smi_larb_get/put to enable the power-domain
> >> > ,clocks and initialize the iommu configuration register for each a local
> >> > arbiter, The reason is:
> >> > a) If a device would like to disable iommu, it also need call
> >> > mtk_smi_larb_get/put to enable its power and clocks.
> >> > b) The iommu core don't support attach/detach a device within a
> >> > iommu-group. So we cann't use iommu_attach_device(iommu_detach_device)
> >> > instead
> >> > of mtk_smi_larb_get/put.
> >> >
> > [..]
> >> > +static int
> >> > +mtk_smi_enable(struct device *dev, struct clk *apb, struct clk *smi)
> >> > +{
> >> > + int ret;
> >> > +
> >> > + ret = pm_runtime_get_sync(dev);
> >> > + if (ret < 0)
> >> > + return ret;
> >> > +
> >> > + ret = clk_prepare_enable(apb);
> >> > + if (ret)
> >> > + goto err_put_pm;
> >> > +
> >> > + ret = clk_prepare_enable(smi);
> >> > + if (ret)
> >> > + goto err_disable_apb;
> >> > +
> >> > + return 0;
> >> > +
> >> > +err_disable_apb:
> >> > + clk_disable_unprepare(apb);
> >> > +err_put_pm:
> >> > + pm_runtime_put_sync(dev);
> >> > + return ret;
> >> > +}
> >> > +
> >> > +static void
> >> > +mtk_smi_disable(struct device *dev, struct clk *apb, struct clk *smi)
> >> > +{
> >> > + clk_disable_unprepare(smi);
> >> > + clk_disable_unprepare(apb);
> >> > + pm_runtime_put_sync(dev);
> >> > +}
> >> > +
> >> > +static int mtk_smi_common_enable(struct mtk_smi_common *common)
> >> > +{
> >> > + return mtk_smi_enable(common->dev, common->clk_apb, common->clk_smi);
> >> > +}
> >> > +
> >> > +static void mtk_smi_common_disable(struct mtk_smi_common *common)
> >> > +{
> >> > + mtk_smi_disable(common->dev, common->clk_apb, common->clk_smi);
> >> > +}
> >> > +
> >> > +static int mtk_smi_larb_enable(struct mtk_smi_larb *larb)
> >> > +{
> >> > + return mtk_smi_enable(larb->dev, larb->clk_apb, larb->clk_smi);
> >> > +}
> >> > +
> >> > +static void mtk_smi_larb_disable(struct mtk_smi_larb *larb)
> >> > +{
> >> > + mtk_smi_disable(larb->dev, larb->clk_apb, larb->clk_smi);
> >> > +}
> >> > +
> >>
> >> This is somehow over-engineered. Just use mtk_smi_enable and mtk_smi_disable
> >> instead of adding an extra indirection.
> >
> > I added this only for readable...then the code in mtk_smi_larb_get below
> > may looks simple and readable.
> >
> > If I use mtk_smi_enable/disable directly, the code will be like our
> > v5[1], is it OK?
> > Maybe I don't need these help function here, and only add more comment
> > based on v5.
> >
> > [1]
> > http://lists.linuxfoundation.org/pipermail/iommu/2015-October/014590.html
>
> bike-shedding...
>
> I like the fact that Yong is trying to make his helpers more type-safe.
> But, perhaps we can rename "struct mtk_smi_common" as "struct
> mtk_smi", and then make "struct mtk_smi_larb" contain a "struct
> mtk_smi":
>
> struct mtk_smi {
> struct device *dev;
> struct clk *clk_apb, *clk_smi;
> }
>
> struct mtk_smi_larb {
> struct mtk_smi;
> ...
> }
>
>
> Then, have:
>
> int mtk_smi_enable(struct mtk_smi *smi)
> {
> clk_enable(smi->clk_apb);
> ...
> }
>
> int mtk_smi_disable(struct mtk_smi *smi)
> {
> }
>
> int mtk_smi_larb_get(struct device *larbdev)
> {
> struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
> struct mtk_smi *common = dev_get_drvdata(larb->smi_common_dev);
>
> mtk_smi_enable(common);
> mtk_smi_enable(&larb->smi);
> ...
> }
Thanks. I will change like this in next time.
>
> >>
> >> > +int mtk_smi_larb_get(struct device *larbdev)
> >> > +{
> >> > + struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
> >> > + struct mtk_smi_common *common = dev_get_drvdata(larb->smi_common_dev);
> >> > + int ret;
> >> > +
> >> > + ret = mtk_smi_common_enable(common);
> >> > + if (ret)
> >> > + return ret;
> >> > +
> >> > + ret = mtk_smi_larb_enable(larb);
> >> > + if (ret)
> >> > + goto err_put_smi;
> >> > +
> >> > + /* Configure the iommu info */
> >> > + writel_relaxed(larb->mmu, larb->base + SMI_LARB_MMU_EN);
>
> I think this should probably be writel() not writel_relaxed, since you
> really do want the barrier to ensure all other register accesses have
> completed before enabling the MMU.
Yes. I will fix this.
>
> >> > +
> >> > + return 0;
> >> > +
> >> > +err_put_smi:
> >> > + mtk_smi_common_disable(common);
> >> > + return ret;
> >> > +}
> >> > +
> >> > +void mtk_smi_larb_put(struct device *larbdev)
> >> > +{
> >> > + struct mtk_smi_larb *larb = dev_get_drvdata(larbdev);
> >> > + struct mtk_smi_common *common = dev_get_drvdata(larb->smi_common_dev);
> >> > +
> >> > + writel_relaxed(0, larb->base + SMI_LARB_MMU_EN);
> >> > + mtk_smi_larb_disable(larb);
> >> > + mtk_smi_common_disable(common);
> >> > +}
> >> > +
> >>
> >> Looks strange that you just disable all MMUs while you only enable some of
> >> them at runtime. Unfortunately the datasheet I have lacks the SMI part, so I
> >> can just guess how the HW is working.
> >> From the DTS it looks like as if a larb can be used by two different
> >> components (e.g. larb0 from ovl0 and rdma0). Wouldn't that produce a conflict?
> >
> > Thanks. It's really a problem.
> >
> > There are OVL0 and MDP in larb0, Both will call mtk_smi_larb_get/put, we
> > cann't disable all the MMUs in whole the larb0 here. This register
> > should be reset to zero while the larb power domain turning off(rely on
> > the power-domain ref count).
> > I will delete this(keep this in our V5.)
>
> Hmm, mtk_smi_config_port(.., false) clears the bit in larb->mmu, but
> does not actually "disable" an enabled mmu.
Actually mtk_smi_config_port(.., false) will never be called currently.
If anybody would like to call iommu_detach_device to config-port false.
He will get the log below since the current iommu core don't support
detach one device in a iommu-group which have many devices.
That's to say that the larb->mmu is initialized in probe, and will never
be changed again.
(151119_13:39:37.472)WARNING:
at /proj/mtk40525/upstreamdev/v4.4/kernel/mediatek/drivers/iommu/iommu.c:1154
(151119_13:39:37.472)Modules linked in:
(151119_13:39:37.472)CPU: 1 PID: 731 Comm: sh Not tainted 4.4.0-rc1+ #37
(151119_13:39:37.472)Hardware name: MediaTek MT8173 evaluation board
(DT)
(151119_13:39:37.472)task: ffffffc076bb4d00 ti: ffffffc076bdc000
task.ti: ffffffc076bdc000
(151119_13:39:37.472)PC is at iommu_detach_device+0x5c/0xb0
(151119_13:39:37.472)LR is at iommu_detach_device+0x30/0xb0
...
(151119_13:39:37.550)---[ end trace d831cba9f811edf3 ]---
(151119_13:39:37.550)Call trace:
(151119_13:39:37.550)[<ffffffc0003f8c70>] iommu_detach_device+0x5c/0xb0
By the way, In the next version I plan to delete this interface
mtk_smi_config_port, use the additional data of the component-bind
instead of this.
> The MMU will be disabled only on the next mtk_smi_larb_get() (for a
> different port on the same larb).
> I guess this is ok. The only weird thing is this situation, where an
> MMU can be left enabled when its user is done with it:
>
> /* configure port 0 as 'enabled' */
> mtk_smi_config_port(0, true);
> /* configure port 1 as 'enabled' */
> mtk_smi_config_port(1, true);
>
> /* user of port 0 wants to do work */
> mtk_smi_larb_get() /* turns on all clks, power & enables both MMUs */
>
> /* user of port 1 wants to do work */
> mtk_smi_larb_get()
>
> /* user of port 1 done doing work */
> mtk_smi_larb_put()
>
> /* MMU 1 is still enabled */
This is really not so perfect in this case.
Even though the iommu-core support iommu-detach dynamically for our case
in the future(there is no plan currently), This don't have bad effect.
If user of port 1 want to work again, He should call mtk_smi_larb_get
again.
>From the HW, there may be different modules in a local arbiter, SMI here
can not detect which module call mtk_smi_larb_put and disable his
special iommu bits. After all mtk_smi_larb_put is mainly for power off
and disable the clocks.
>
>
> Thanks!
> -Dan
More information about the linux-arm-kernel
mailing list