[PATCH v2] dts/ls2080a: Update PCIe compatible

[Scott Wood]

On Mon, 2015-12-14 at 20:01 -0600, Hu Mingkai-B21284 wrote:
> 
> > -----Original Message-----
> > From: Hu Mingkai-B21284
> > Sent: Monday, December 07, 2015 4:44 PM
> > To: 'Rob Herring'
> > Cc: arm at kernel.org; devicetree at vger.kernel.org; Li Yang-Leo-R58472;
> > linux-arm-kernel at lists.infradead.org; Lian Minghuan-B31939
> > Subject: RE: [PATCH v2] dts/ls2080a: Update PCIe compatible
> > 
> > 
> > 
> > > -----Original Message-----
> > > From: Rob Herring [mailto:robh at kernel.org]
> > > Sent: Saturday, December 05, 2015 12:23 AM
> > > To: Hu Mingkai-B21284
> > > Cc: arm at kernel.org; devicetree at vger.kernel.org; Li Yang-Leo-R58472;
> > > linux-arm-kernel at lists.infradead.org; Lian Minghuan-B31939
> > > Subject: Re: [PATCH v2] dts/ls2080a: Update PCIe compatible
> > > 
> > > On Fri, Dec 04, 2015 at 06:20:17PM +0800, Mingkai Hu wrote:
> > > > From: Minghuan Lian <Minghuan.Lian at freescale.com>
> > > > 
> > > > The patch adds LS2085a to PCIe compatible to fix the compatibility
> > > > issue when using firmware with LS2085a compatible property.
> > > > 
> > > > Signed-off-by: Minghuan Lian <Minghuan.Lian at freescale.com>
> > > > Signed-off-by: Mingkai Hu <Mingkai.Hu at freescale.com>
> > > > ---
> > > > v2 change:
> > > >  - Rebased to latest kernel base
> > > 
> > > How about implementing my comments on v1, too?
> > > 
> > 
> > Hi Rob,
> > 
> > Do you mean to change the combinations in layerscape-pci.txt as follows?
> > 
> > > --- a/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > > +++ b/Documentation/devicetree/bindings/pci/layerscape-pci.txt
> > > @@ -15,6 +15,7 @@ Required properties:
> > >  - compatible: should contain the platform identifier such as:
> > >          "fsl,ls1021a-pcie", "snps,dw-pcie"
> > > -        "fsl,ls2080a-pcie", "snps,dw-pcie"
> > > +        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
> > 
> > 
> > And the ls2085a was released first, but the dts file is for ls2080a (fsl-
> > ls2080a.dtsi), So I prefer to put the ls2080a as the first compatible
> > string. How about your suggestion?
> > 
> 
> Hi Rob,
> 
> I will keep the "fsl,ls2085a-pcie" as the first compatible string as
> discussed.

Do you mean "fsl,ls2080a-pcie"?

-Scott

> And change the layerscape-pci.txt as follows:
> 
> > > -        "fsl,ls2080a-pcie", "snps,dw-pcie"
> > > +        "fsl,ls2080a-pcie", "fsl,ls2085a-pcie", "snps,dw-pcie"
> 
> What's your suggestion?