[PATCH v2 5/8] arm64: dts: mediatek: Add Video Encoder for MT8173

Matthias Brugger matthias.bgg at gmail.com
Mon Dec 14 10:18:17 PST 2015


On Friday 11 Dec 2015 17:55:40 Tiffany Lin wrote:
> Add video encoder node for MT8173
> 
> Signed-off-by: Tiffany Lin <tiffany.lin at mediatek.com>
> ---
>  arch/arm64/boot/dts/mediatek/mt8173.dtsi |   47
> ++++++++++++++++++++++++++++++ 1 file changed, 47 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> b/arch/arm64/boot/dts/mediatek/mt8173.dtsi index b8c8ff0..a6b0fcf 100644
> --- a/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> +++ b/arch/arm64/boot/dts/mediatek/mt8173.dtsi
> @@ -545,6 +545,53 @@
>  			#clock-cells = <1>;
>  		};
> 
> +		larb3: larb at 18001000 {
> +			compatible = "mediatek,mt8173-smi-larb";
> +			reg = <0 0x18001000 0 0x1000>;
> +			mediatek,smi = <&smi_common>;
> +			power-domains = <&scpsys MT8173_POWER_DOMAIN_VENC>;
> +			clocks = <&vencsys CLK_VENC_CKE1>,
> +				 <&vencsys CLK_VENC_CKE0>;
> +			clock-names = "apb", "smi";
> +		};
> +
> +		vcodec_enc: vcodec at 18002000 {
> +			compatible = "mediatek,mt8173-vcodec-enc";
> +			reg = <0 0x18002000 0 0x1000>,	/* VENC_SYS */
> +			      <0 0x19002000 0 0x1000>;	/* VENC_LT_SYS */
> +			interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_LOW>,
> +				     <GIC_SPI 202 IRQ_TYPE_LEVEL_LOW>;
> +			larb = <&larb3>,
> +			       <&larb5>;

should be mediatek,larb or just larb for all instances of the larb's.
See my other email about the bindings.

Regards,
Matthias

> +			iommus = <&iommu M4U_LARB3_ID M4U_PORT_VENC_RCPU>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_REC>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_BSDMA>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_SV_COMV>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_RD_COMV>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_LUMA>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_CUR_CHROMA>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_LUMA>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_REF_CHROMA>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_RDMA>,
> +				 <&iommu M4U_LARB3_ID M4U_PORT_VENC_NBM_WDMA>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_RCPU_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_FRM_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_BSDMA_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_SV_COMA_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_RD_COMA_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_LUMA_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_CUR_CHROMA_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_REF_LUMA_SET2>,
> +				 <&iommu M4U_LARB5_ID M4U_PORT_VENC_REC_CHROMA_SET2>;
> +			vpu = <&vpu>;
> +			clocks = <&apmixedsys CLK_APMIXED_VENCPLL>,
> +				 <&topckgen CLK_TOP_VENC_LT_SEL>,
> +				 <&topckgen CLK_TOP_VCODECPLL_370P5>;
> +			clock-names = "vencpll",
> +				      "venc_lt_sel",
> +				      "vcodecpll_370p5_ck";
> +		};
> +
>  		vencltsys: clock-controller at 19000000 {
>  			compatible = "mediatek,mt8173-vencltsys", "syscon";
>  			reg = <0 0x19000000 0 0x1000>;




More information about the linux-arm-kernel mailing list