[PATCH v12 04/16] arm64: kvm: allows kvm cpu hotplug
AKASHI Takahiro
takahiro.akashi at linaro.org
Sun Dec 13 23:33:27 PST 2015
Marc,
On 12/12/2015 01:28 AM, Marc Zyngier wrote:
> On 11/12/15 08:06, AKASHI Takahiro wrote:
>> Ashwin, Marc,
>>
>> On 12/03/2015 10:58 PM, Marc Zyngier wrote:
>>> On 02/12/15 22:40, Ashwin Chaugule wrote:
>>>> Hello,
>>>>
>>>> On 24 November 2015 at 17:25, Geoff Levand <geoff at infradead.org> wrote:
>>>>> From: AKASHI Takahiro <takahiro.akashi at linaro.org>
>>>>>
>>>>> The current kvm implementation on arm64 does cpu-specific initialization
>>>>> at system boot, and has no way to gracefully shutdown a core in terms of
>>>>> kvm. This prevents, especially, kexec from rebooting the system on a boot
>>>>> core in EL2.
>>>>>
>>>>> This patch adds a cpu tear-down function and also puts an existing cpu-init
>>>>> code into a separate function, kvm_arch_hardware_disable() and
>>>>> kvm_arch_hardware_enable() respectively.
>>>>> We don't need arm64-specific cpu hotplug hook any more.
>>>>>
>>>>> Since this patch modifies common part of code between arm and arm64, one
>>>>> stub definition, __cpu_reset_hyp_mode(), is added on arm side to avoid
>>>>> compiling errors.
>>>>>
>>>>> Signed-off-by: AKASHI Takahiro <takahiro.akashi at linaro.org>
>>>>> ---
>>>>> arch/arm/include/asm/kvm_host.h | 10 ++++-
>>>>> arch/arm/include/asm/kvm_mmu.h | 1 +
>>>>> arch/arm/kvm/arm.c | 79 ++++++++++++++++++---------------------
>>>>> arch/arm/kvm/mmu.c | 5 +++
>>>>> arch/arm64/include/asm/kvm_host.h | 16 +++++++-
>>>>> arch/arm64/include/asm/kvm_mmu.h | 1 +
>>>>> arch/arm64/include/asm/virt.h | 9 +++++
>>>>> arch/arm64/kvm/hyp-init.S | 33 ++++++++++++++++
>>>>> arch/arm64/kvm/hyp.S | 32 ++++++++++++++--
>>>>> 9 files changed, 138 insertions(+), 48 deletions(-)
>>>>
>>>> [..]
>>>>
>>>>>
>>>>>
>>>>> static struct notifier_block hyp_init_cpu_pm_nb = {
>>>>> @@ -1108,11 +1119,6 @@ static int init_hyp_mode(void)
>>>>> }
>>>>>
>>>>> /*
>>>>> - * Execute the init code on each CPU.
>>>>> - */
>>>>> - on_each_cpu(cpu_init_hyp_mode, NULL, 1);
>>>>> -
>>>>> - /*
>>>>> * Init HYP view of VGIC
>>>>> */
>>>>> err = kvm_vgic_hyp_init();
>>>>
>>>> With this flow, the cpu_init_hyp_mode() is called only at VM guest
>>>> creation, but vgic_hyp_init() is called at bootup. On a system with
>>>> GICv3, it looks like we end up with bogus values from the ICH_VTR_EL2
>>>> (to get the number of LRs), because we're not reading it from EL2
>>>> anymore.
>>
>> Thank you for pointing this out.
>> Recently I tested my kdump code on hikey, and as hikey(hi6220) has gic-400,
>> I didn't notice this problem.
>
> Because GIC-400 is a GICv2 implementation, which is entirely MMIO based.
> GICv3 uses some system registers that are only available at EL2, and KVM
> needs some information contained in these registers before being able to
> get initialized.
I see.
>>> Indeed, this is completely broken (I just reproduced the issue on a
>>> model). I wish this kind of details had been checked earlier, but thanks
>>> for pointing it out.
>>>
>>>> Whats the best way to fix this?
>>>> - Call kvm_arch_hardware_enable() before vgic_hyp_init() and disable later?
>>>> - Fold the VGIC init stuff back into hardware_enable()?
>>>
>>> None of that works - kvm_arch_hardware_enable() is called once per CPU,
>>> while vgic_hyp_init() can only be called once. Also,
>>> kvm_arch_hardware_enable() is called from interrupt context, and I
>>> wouldn't feel comfortable starting probing DT and allocating stuff from
>>> there.
>>
>> Do you think so?
>> How about the fixup! patch attached below?
>> The point is that, like Ashwin's first idea, we initialize cpus temporarily
>> before kvm_vgic_hyp_init() and then soon reset cpus again. Thus,
>> kvm cpu hotplug will still continue to work as before.
>> Now that cpu_init_hyp_mode() is revived as exactly the same as Marc's
>> original code, the change will not be a big jump.
>
> This seems quite complicated:
> - init EL2 on all CPUs
> - do some initialization
> - tear all CPUs EL2 down
> - let KVM drive the vectors being set or not
>
> My questions are: why do we need to do this on *all* cpus? Can't that
> work on a single one?
I did initialize all the cpus partly because using preempt_enable/disable
looked a bit ugly and partly because we may, in the future, do additional
per-cpu initialization in kvm_vgic_hyp_init() and/or kvm_timer_hyp_init().
But if you're comfortable with preempt_*() stuff, I don' care.
> Also, the simple fact that we were able to get some junk value is a sign
> that something is amiss. I'd expect a splat of some sort, because we now
> have a possibility of doing things in the wrong context.
>
>>
>> If kvm_hyp_call() in vgic_v3_probe()/kvm_vgic_hyp_init() is a *problem*,
>> I hope this should work. Actually I confirmed that, with this fixup! patch,
>> we could run a kvm guest and also successfully executed kexec on model w/gic-v3.
>>
>> My only concern is the following kernel message I saw when kexec shut down
>> the kernel:
>> (Please note that I was running one kvm quest (pid=961) here.)
>>
>> ===
>> sh-4.3# ./kexec -d -e
>> kexec version: 15.11.16.11.06-g41e52e2
>> arch_process_options:112: command_line: (null)
>> arch_process_options:114: initrd: (null)
>> arch_process_options:115: dtb: (null)
>> arch_process_options:117: port: 0x0
>> kvm: exiting hardware virtualization
>> kvm [961]: Unsupported exception type: 6248304 <== this message
>
> That makes me feel very uncomfortable. It looks like we've exited a
> guest with some horrible value in X0. How is that even possible?
>
> This deserves to be investigated.
I guess the problem is that cpu tear-down function is called even if a kvm guest
is still running in kvm_arch_vcpu_ioctl_run().
So adding a check whether cpu has been initialized or not in every iteration of
kvm_arch_vcpu_ioctl_run() will, if necessary, terminate a guest safely without entering
a guest mode. Since this check is done while interrupt is disabled, it won't
interfere with kvm_arch_hardware_disable() called via IPI.
See the attached fixup patch.
Again, I verified the code on model.
Thanks,
-Takahiro AKASHI
> Thanks,
>
> M.
>
----8<----
From 77f273ba5e0c3dfcf75a5a8d1da8035cc390250c Mon Sep 17 00:00:00 2001
From: AKASHI Takahiro <takahiro.akashi at linaro.org>
Date: Fri, 11 Dec 2015 13:43:35 +0900
Subject: [PATCH] fixup! arm64: kvm: allows kvm cpu hotplug
---
arch/arm/kvm/arm.c | 45 ++++++++++++++++++++++++++++++++++-----------
1 file changed, 34 insertions(+), 11 deletions(-)
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 518c3c7..d7e86fb 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -573,7 +573,11 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
/*
* Re-check atomic conditions
*/
- if (signal_pending(current)) {
+ if (__hyp_get_vectors() == hyp_default_vectors) {
+ /* cpu has been torn down */
+ ret = -ENOEXEC;
+ run->exit_reason = KVM_EXIT_SHUTDOWN;
+ } else if (signal_pending(current)) {
ret = -EINTR;
run->exit_reason = KVM_EXIT_INTR;
}
@@ -950,7 +954,7 @@ long kvm_arch_vm_ioctl(struct file *filp,
}
}
-int kvm_arch_hardware_enable(void)
+static void cpu_init_hyp_mode(void)
{
phys_addr_t boot_pgd_ptr;
phys_addr_t pgd_ptr;
@@ -958,9 +962,6 @@ int kvm_arch_hardware_enable(void)
unsigned long stack_page;
unsigned long vector_ptr;
- if (__hyp_get_vectors() != hyp_default_vectors)
- return 0;
-
/* Switch from the HYP stub to our own HYP init vector */
__hyp_set_vectors(kvm_get_idmap_vector());
@@ -973,24 +974,35 @@ int kvm_arch_hardware_enable(void)
__cpu_init_hyp_mode(boot_pgd_ptr, pgd_ptr, hyp_stack_ptr, vector_ptr);
kvm_arm_init_debug();
-
- return 0;
}
-void kvm_arch_hardware_disable(void)
+static void cpu_reset_hyp_mode(void)
{
phys_addr_t boot_pgd_ptr;
phys_addr_t phys_idmap_start;
- if (__hyp_get_vectors() == hyp_default_vectors)
- return;
-
boot_pgd_ptr = kvm_mmu_get_boot_httbr();
phys_idmap_start = kvm_get_idmap_start();
__cpu_reset_hyp_mode(boot_pgd_ptr, phys_idmap_start);
}
+int kvm_arch_hardware_enable(void)
+{
+ if (__hyp_get_vectors() == hyp_default_vectors)
+ cpu_init_hyp_mode();
+
+ return 0;
+}
+
+void kvm_arch_hardware_disable(void)
+{
+ if (__hyp_get_vectors() == hyp_default_vectors)
+ return;
+
+ cpu_reset_hyp_mode();
+}
+
#ifdef CONFIG_CPU_PM
static int hyp_init_cpu_pm_notifier(struct notifier_block *self,
unsigned long cmd,
@@ -1114,9 +1126,20 @@ static int init_hyp_mode(void)
}
/*
+ * Init this CPU temporarily to execute kvm_hyp_call()
+ * during kvm_vgic_hyp_init().
+ */
+ preempt_disable();
+ cpu_init_hyp_mode();
+
+ /*
* Init HYP view of VGIC
*/
err = kvm_vgic_hyp_init();
+
+ cpu_reset_hyp_mode();
+ preempt_enable();
+
if (err)
goto out_free_context;
--
1.7.9.5
More information about the linux-arm-kernel
mailing list