[PATCH v5 1/9] mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings

[Andy Shevchenko]

On Fri, Nov 27, 2015 at 8:43 AM, Chen-Yu Tsai <wens at csie.org> wrote:
> The AXP223 is a new PMIC commonly paired with Allwinner A23/A33 SoCs.
> It is functionally identical to AXP221; only the regulator default
> voltage/status and the external host interface are different.
>

I missed cover letter, but anyway, for now the entire series looks fine for me!
FWIW, Reviewed-by: Andy Shevchenko <andy.shevchenko at gmail.com>

> Signed-off-by: Chen-Yu Tsai <wens at csie.org>
> Acked-by: Maxime Ripard <maxime.ripard at free-electrons.com>
> Acked-by: Rob Herring <robh at kernel.org>
> Acked-by: Lee Jones <lee.jones at linaro.org>
> ---
>  Documentation/devicetree/bindings/mfd/axp20x.txt | 7 ++++---
>  1 file changed, 4 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/axp20x.txt b/Documentation/devicetree/bindings/mfd/axp20x.txt
> index a474359dd206..fd39fa54571b 100644
> --- a/Documentation/devicetree/bindings/mfd/axp20x.txt
> +++ b/Documentation/devicetree/bindings/mfd/axp20x.txt
> @@ -5,11 +5,12 @@ axp152 (X-Powers)
>  axp202 (X-Powers)
>  axp209 (X-Powers)
>  axp221 (X-Powers)
> +axp223 (X-Powers)
>
>  Required properties:
>  - compatible: "x-powers,axp152", "x-powers,axp202", "x-powers,axp209",
> -             "x-powers,axp221"
> -- reg: The I2C slave address for the AXP chip
> +             "x-powers,axp221", "x-powers,axp223"
> +- reg: The I2C slave address or RSB hardware address for the AXP chip
>  - interrupt-parent: The parent interrupt controller
>  - interrupts: SoC NMI / GPIO interrupt connected to the PMIC's IRQ pin
>  - interrupt-controller: The PMIC has its own internal IRQs
> @@ -51,7 +52,7 @@ LDO3          : LDO           : ldo3in-supply
>  LDO4           : LDO           : ldo24in-supply        : shared supply
>  LDO5           : LDO           : ldo5in-supply
>
> -AXP221 regulators, type, and corresponding input supply names:
> +AXP221/AXP223 regulators, type, and corresponding input supply names:
>
>  Regulator        Type            Supply Name             Notes
>  ---------        ----            -----------             -----
> --
> 2.6.2
>



-- 
With Best Regards,
Andy Shevchenko