[PATCH v5 2/4] Documentation: add the binding file for Freescale imx7d ADC driver

[Jonathan Cameron]

On 08/12/15 10:26, Haibo Chen wrote:
> The patch adds the binding file for Freescale imx7d ADC driver.
> 
> Signed-off-by: Haibo Chen <haibo.chen at freescale.com>
> Acked-by: Rob Herring <robh at kernel.org>
Applied 
> ---
>  .../devicetree/bindings/iio/adc/imx7d-adc.txt      | 22 ++++++++++++++++++++++
>  1 file changed, 22 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> 
> diff --git a/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> new file mode 100644
> index 0000000..5c184b9
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/imx7d-adc.txt
> @@ -0,0 +1,22 @@
> +Freescale imx7d ADC bindings
> +
> +The devicetree bindings are for the ADC driver written for
> +imx7d SoC.
> +
> +Required properties:
> +- compatible: Should be "fsl,imx7d-adc"
> +- reg: Offset and length of the register set for the ADC device
> +- interrupts: The interrupt number for the ADC device
> +- clocks: The root clock of the ADC controller
> +- clock-names: Must contain "adc", matching entry in the clocks property
> +- vref-supply: The regulator supply ADC reference voltage
> +
> +Example:
> +adc1: adc at 30610000 {
> +	compatible = "fsl,imx7d-adc";
> +	reg = <0x30610000 0x10000>;
> +	interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
> +	clocks = <&clks IMX7D_ADC_ROOT_CLK>;
> +	clock-names = "adc";
> +	vref-supply = <&reg_vcc_3v3_mcu>;
> +};
>