[PATCH V4 2/2] ARM: dts: imx6q: add Novena board
Marek Vasut
marex at denx.de
Fri Dec 11 19:27:13 PST 2015
From: Sean Cross <xobs at kosagi.com>
Novena is an open-hardware laptop/desktop/bare board.
See http://www.kosagi.com/w/index.php?title=Novena_Main_Page
Signed-off-by: Sean Cross <xobs at kosagi.com>
Signed-off-by: Marek Vasut <marex at denx.de>
Cc: Fabio Estevam <fabio.estevam at freescale.com>
Cc: Lucas Stach <l.stach at pengutronix.de>
Cc: Sean Cross <xobs at kosagi.com>
Cc: Shawn Guo <shawnguo at kernel.org>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/imx6q-novena.dts | 789 +++++++++++++++++++++++++++++++++++++
2 files changed, 790 insertions(+)
create mode 100644 arch/arm/boot/dts/imx6q-novena.dts
V2: Fix the PCIe regulator, make it always on
Fix the polarity of SD2 WP and CD lines, make them active low.
Drop the simple-bus for regulators, put them in /soc instead.
Configure the mux of all pins instead of depending on bootloader.
Change license to Dual X11/GPLv2+ (Acked by Sean)
Sort the nodes alphabetically.
V3: Drop the spidev node
Drop the fsl,mode = "i2s-slave";
Move regulators into /
V4: Move iomux node to the end of the file
Drop the first level of functions from iomux
Tweak the names of the regulator nodes to reg_nnn: regulator-nnn {},
Remove various newlines
Formatting fixes
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 0fe130e..ba6c6d7 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -325,6 +325,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-hummingboard.dtb \
imx6q-nitrogen6x.dtb \
imx6q-nitrogen6_max.dtb \
+ imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
diff --git a/arch/arm/boot/dts/imx6q-novena.dts b/arch/arm/boot/dts/imx6q-novena.dts
new file mode 100644
index 0000000..0dea08a
--- /dev/null
+++ b/arch/arm/boot/dts/imx6q-novena.dts
@@ -0,0 +1,789 @@
+/*
+ * Copyright 2015 Sutajio Ko-Usagi PTE LTD
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public
+ * License along with this file; if not, write to the Free
+ * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
+ * MA 02110-1301 USA
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ */
+
+/dts-v1/;
+#include "imx6q.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+/ {
+ model = "Kosagi Novena Dual/Quad";
+ compatible = "kosagi,imx6q-novena", "fsl,imx6q";
+
+ memory {
+ reg = <0x10000000 0xefffffff>;
+ };
+
+ chosen {
+ stdout-path = &uart2;
+ };
+
+ backlight: backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm1 0 10000000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_backlight_novena>;
+ power-supply = <®_lvds_lcd>;
+ brightness-levels = <0 3 6 12 16 24 32 48 64 96 128 192 255>;
+ default-brightness-level = <12>;
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio_keys_novena>;
+
+ user-button {
+ label = "User Button";
+ gpios = <&gpio4 14 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_POWER>;
+ };
+
+ lid {
+ label = "Lid";
+ gpios = <&gpio4 12 GPIO_ACTIVE_LOW>;
+ linux,input-type = <5>; /* EV_SW */
+ linux,code = <0>; /* SW_LID */
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_leds_novena>;
+
+ heartbeat {
+ label = "novena:white:panel";
+ gpios = <&gpio1 21 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+ };
+
+ panel: panel {
+ compatible = "innolux,n133hse-ea1", "simple-panel";
+ backlight = <&backlight>;
+ };
+
+ reg_2p5v: regulator-2p5v {
+ compatible = "regulator-fixed";
+ regulator-name = "2P5V";
+ regulator-min-microvolt = <2500000>;
+ regulator-max-microvolt = <2500000>;
+ regulator-always-on;
+ };
+
+ reg_3p3v: regulator-3p3v {
+ compatible = "regulator-fixed";
+ regulator-name = "3P3V";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_audio_codec: regulator-audio-codec {
+ compatible = "regulator-fixed";
+ regulator-name = "es8328-power";
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ startup-delay-us = <400000>;
+ gpio = <&gpio5 17 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_display: regulator-display {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-display-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <200000>;
+ gpio = <&gpio5 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_lvds_lcd: regulator-lvds-lcd {
+ compatible = "regulator-fixed";
+ regulator-name = "lcd-lvds-power";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_pcie: regulator-pcie {
+ compatible = "regulator-fixed";
+ regulator-name = "pcie-bus-power";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ regulator-always-on;
+ };
+
+ reg_sata: regulator-sata {
+ compatible = "regulator-fixed";
+ regulator-name = "sata-power";
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <10000>;
+ gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_usb_otg_vbus: regulator-usb-otg-vbus {
+ compatible = "regulator-fixed";
+ regulator-name = "usb_otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ enable-active-high;
+ };
+
+ sound {
+ compatible = "fsl,imx-audio-es8328";
+ model = "imx-audio-es8328";
+ ssi-controller = <&ssi1>;
+ audio-codec = <&codec>;
+ audio-amp-supply = <®_audio_codec>;
+ jack-gpio = <&gpio5 15 GPIO_ACTIVE_HIGH>;
+ audio-routing =
+ "Speaker", "LOUT2",
+ "Speaker", "ROUT2",
+ "Speaker", "audio-amp",
+ "Headphone", "ROUT1",
+ "Headphone", "LOUT1",
+ "LINPUT1", "Mic Jack",
+ "RINPUT1", "Mic Jack",
+ "Mic Jack", "Mic Bias";
+ mux-int-port = <0x1>;
+ mux-ext-port = <0x3>;
+ };
+};
+
+&audmux {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_audmux_novena>;
+ status = "okay";
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3_novena>;
+ fsl,spi-num-chipselects = <3>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_enet_novena>;
+ phy-mode = "rgmii";
+ phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
+ rxc-skew-ps = <3000>;
+ rxdv-skew-ps = <0>;
+ txc-skew-ps = <3000>;
+ txen-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txd0-skew-ps = <3000>;
+ txd1-skew-ps = <3000>;
+ txd2-skew-ps = <3000>;
+ txd3-skew-ps = <3000>;
+ status = "okay";
+};
+
+&hdmi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hdmi_novena>;
+ ddc-i2c-bus = <&i2c2>;
+ status = "okay";
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c1_novena>;
+ status = "okay";
+
+ accel: mma8452 at 1c {
+ compatible = "fsl,mma8452";
+ reg = <0x1c>;
+ };
+
+ rtc: pcf8523 at 68 {
+ compatible = "nxp,pcf8523";
+ reg = <0x68>;
+ };
+
+ sbs_battery: bq20z75 at 0b {
+ compatible = "sbs,sbs-battery";
+ reg = <0x0b>;
+ sbs,i2c-retry-count = <50>;
+ };
+
+ touch: stmpe811 at 44 {
+ compatible = "st,stmpe811";
+ reg = <0x44>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ irq-gpio = <&gpio5 13 GPIO_ACTIVE_HIGH>;
+ id = <0>;
+ blocks = <0x5>;
+ irq-trigger = <0x1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_stmpe_novena>;
+ vio-supply = <®_3p3v>;
+ vcc-supply = <®_3p3v>;
+
+ stmpe_touchscreen {
+ compatible = "st,stmpe-ts";
+ st,sample-time = <4>;
+ st,mod-12b = <1>;
+ st,ref-sel = <0>;
+ st,adc-freq = <1>;
+ st,ave-ctrl = <1>;
+ st,touch-det-delay = <2>;
+ st,settling = <2>;
+ st,fraction-z = <7>;
+ st,i-drive = <1>;
+ };
+ };
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2_novena>;
+ status = "okay";
+
+ pmic: pfuze100 at 08 {
+ compatible = "fsl,pfuze100";
+ reg = <0x08>;
+
+ regulators {
+ reg_sw1a: regulator-sw1a {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <6250>;
+ };
+
+ reg_sw1c: sw1c {
+ regulator-min-microvolt = <300000>;
+ regulator-max-microvolt = <1875000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw2: sw2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw3a: sw3a {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw3b: sw3b {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <1975000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_sw4: sw4 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_swbst: swbst {
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5150000>;
+ regulator-boot-on;
+ };
+
+ reg_snvs: vsnvs {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vref: vrefddr {
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ reg_vgen1: vgen1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen2: vgen2 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <1550000>;
+ };
+
+ reg_vgen3: vgen3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reg_vgen4: vgen4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen5: vgen5 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ reg_vgen6: vgen6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+ };
+ };
+};
+
+&i2c3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c3_novena>;
+ status = "okay";
+
+ codec: es8328 at 11 {
+ compatible = "everest,es8328";
+ reg = <0x11>;
+ DVDD-supply = <®_audio_codec>;
+ AVDD-supply = <®_audio_codec>;
+ PVDD-supply = <®_audio_codec>;
+ HPVDD-supply = <®_audio_codec>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_sound_novena>;
+ clocks = <&clks IMX6QDL_CLK_CKO1>;
+ assigned-clocks = <&clks IMX6QDL_CLK_CKO>,
+ <&clks IMX6QDL_CLK_CKO1_SEL>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO>,
+ <&clks IMX6QDL_CLK_CKO1>;
+ assigned-clock-parents = <&clks IMX6QDL_CLK_CKO1>,
+ <&clks IMX6QDL_CLK_PLL4_AUDIO_DIV>,
+ <&clks IMX6QDL_CLK_OSC>,
+ <&clks IMX6QDL_CLK_CKO1_PODF>;
+ assigned-clock-rates = <0 0 722534400 22579200>;
+ };
+};
+
+&kpp {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_kpp_novena>;
+ linux,keymap = <
+ MATRIX_KEY(1, 1, KEY_CONFIG)
+ >;
+ status = "okay";
+};
+
+&ldb {
+ fsl,dual-channel;
+ status = "okay";
+
+ lvds-channel at 0 {
+ fsl,data-mapping = "jeida";
+ fsl,data-width = <24>;
+ fsl,panel = <&panel>;
+ status = "okay";
+ };
+};
+
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcie_novena>;
+ reset-gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&sata {
+ target-supply = <®_sata>;
+ fsl,transmit-level-mV = <1025>;
+ fsl,transmit-boost-mdB = <0>;
+ fsl,transmit-atten-16ths = <8>;
+ status = "okay";
+};
+
+&ssi1 {
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2_novena>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3_novena>;
+ status = "okay";
+};
+
+&uart4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4_novena>;
+ status = "okay";
+};
+
+&usbotg {
+ vbus-supply = <®_usb_otg_vbus>;
+ dr_mode = "otg";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usbotg_novena>;
+ disable-over-current;
+ status = "okay";
+};
+
+&usbh1 {
+ vbus-supply = <®_swbst>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc2_novena>;
+ cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 2 GPIO_ACTIVE_LOW>;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&usdhc3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_usdhc3_novena>;
+ bus-width = <4>;
+ non-removable;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_audmux_novena: audmuxgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0
+ MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0
+ MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0
+ MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0
+ >;
+ };
+
+ pinctrl_backlight_novena: backlightgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT8__PWM1_OUT 0x1b0b0
+ MX6QDL_PAD_CSI0_DAT10__GPIO5_IO28 0x1b0b1
+ MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b1
+ >;
+ };
+
+ pinctrl_ecspi3_novena: ecspi3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_DISP0_DAT2__ECSPI3_MISO 0x100b1
+ MX6QDL_PAD_DISP0_DAT1__ECSPI3_MOSI 0x100b1
+ MX6QDL_PAD_DISP0_DAT0__ECSPI3_SCLK 0x100b1
+ >;
+ };
+
+ pinctrl_enet_novena: enetgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
+ MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
+ MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b020
+ MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b028
+ MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b028
+ MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b028
+ MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b028
+ MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b028
+ MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
+ MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
+ MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
+ MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
+ MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
+ MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
+ MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
+ MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
+ /* Ethernet reset */
+ MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x1b0b1
+ >;
+ };
+
+ pinctrl_fpga_gpio: fpgagpiogrp-novena {
+ fsl,pins = <
+ /* FPGA power */
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
+ /* Reset */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ /* FPGA GPIOs */
+ MX6QDL_PAD_EIM_DA0__GPIO3_IO00 0x1b0b1
+ MX6QDL_PAD_EIM_DA1__GPIO3_IO01 0x1b0b1
+ MX6QDL_PAD_EIM_DA2__GPIO3_IO02 0x1b0b1
+ MX6QDL_PAD_EIM_DA3__GPIO3_IO03 0x1b0b1
+ MX6QDL_PAD_EIM_DA4__GPIO3_IO04 0x1b0b1
+ MX6QDL_PAD_EIM_DA5__GPIO3_IO05 0x1b0b1
+ MX6QDL_PAD_EIM_DA6__GPIO3_IO06 0x1b0b1
+ MX6QDL_PAD_EIM_DA7__GPIO3_IO07 0x1b0b1
+ MX6QDL_PAD_EIM_DA8__GPIO3_IO08 0x1b0b1
+ MX6QDL_PAD_EIM_DA9__GPIO3_IO09 0x1b0b1
+ MX6QDL_PAD_EIM_DA10__GPIO3_IO10 0x1b0b1
+ MX6QDL_PAD_EIM_DA11__GPIO3_IO11 0x1b0b1
+ MX6QDL_PAD_EIM_DA12__GPIO3_IO12 0x1b0b1
+ MX6QDL_PAD_EIM_DA13__GPIO3_IO13 0x1b0b1
+ MX6QDL_PAD_EIM_DA14__GPIO3_IO14 0x1b0b1
+ MX6QDL_PAD_EIM_DA15__GPIO3_IO15 0x1b0b1
+ MX6QDL_PAD_EIM_A16__GPIO2_IO22 0x1b0b1
+ MX6QDL_PAD_EIM_A17__GPIO2_IO21 0x1b0b1
+ MX6QDL_PAD_EIM_A18__GPIO2_IO20 0x1b0b1
+ MX6QDL_PAD_EIM_CS0__GPIO2_IO23 0x1b0b1
+ MX6QDL_PAD_EIM_CS1__GPIO2_IO24 0x1b0b1
+ MX6QDL_PAD_EIM_LBA__GPIO2_IO27 0x1b0b1
+ MX6QDL_PAD_EIM_OE__GPIO2_IO25 0x1b0b1
+ MX6QDL_PAD_EIM_RW__GPIO2_IO26 0x1b0b1
+ MX6QDL_PAD_EIM_WAIT__GPIO5_IO00 0x1b0b1
+ MX6QDL_PAD_EIM_BCLK__GPIO6_IO31 0x1b0b1
+ >;
+ };
+
+ pinctrl_fpga_eim: fpgaeimgrp-novena {
+ fsl,pins = <
+ /* FPGA power */
+ MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x1b0b1
+ /* Reset */
+ MX6QDL_PAD_DISP0_DAT13__GPIO5_IO07 0x1b0b1
+ /* FPGA GPIOs */
+ MX6QDL_PAD_EIM_DA0__EIM_AD00 0xb0f1
+ MX6QDL_PAD_EIM_DA1__EIM_AD01 0xb0f1
+ MX6QDL_PAD_EIM_DA2__EIM_AD02 0xb0f1
+ MX6QDL_PAD_EIM_DA3__EIM_AD03 0xb0f1
+ MX6QDL_PAD_EIM_DA4__EIM_AD04 0xb0f1
+ MX6QDL_PAD_EIM_DA5__EIM_AD05 0xb0f1
+ MX6QDL_PAD_EIM_DA6__EIM_AD06 0xb0f1
+ MX6QDL_PAD_EIM_DA7__EIM_AD07 0xb0f1
+ MX6QDL_PAD_EIM_DA8__EIM_AD08 0xb0f1
+ MX6QDL_PAD_EIM_DA9__EIM_AD09 0xb0f1
+ MX6QDL_PAD_EIM_DA10__EIM_AD10 0xb0f1
+ MX6QDL_PAD_EIM_DA11__EIM_AD11 0xb0f1
+ MX6QDL_PAD_EIM_DA12__EIM_AD12 0xb0f1
+ MX6QDL_PAD_EIM_DA13__EIM_AD13 0xb0f1
+ MX6QDL_PAD_EIM_DA14__EIM_AD14 0xb0f1
+ MX6QDL_PAD_EIM_DA15__EIM_AD15 0xb0f1
+ MX6QDL_PAD_EIM_A16__EIM_ADDR16 0xb0f1
+ MX6QDL_PAD_EIM_A17__EIM_ADDR17 0xb0f1
+ MX6QDL_PAD_EIM_A18__EIM_ADDR18 0xb0f1
+ MX6QDL_PAD_EIM_CS0__EIM_CS0_B 0xb0f1
+ MX6QDL_PAD_EIM_CS1__EIM_CS1_B 0xb0f1
+ MX6QDL_PAD_EIM_LBA__EIM_LBA_B 0xb0f1
+ MX6QDL_PAD_EIM_OE__EIM_OE_B 0xb0f1
+ MX6QDL_PAD_EIM_RW__EIM_RW 0xb0f1
+ MX6QDL_PAD_EIM_WAIT__EIM_WAIT_B 0xb0f1
+ MX6QDL_PAD_EIM_BCLK__EIM_BCLK 0xb0f1
+ >;
+ };
+
+ pinctrl_gpio_keys_novena: gpiokeysgrp-novena {
+ fsl,pins = <
+ /* User button */
+ MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0
+ /* PCIe Wakeup */
+ MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1f0e0
+ /* Lid switch */
+ MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
+ >;
+ };
+
+ pinctrl_hdmi_novena: hdmigrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0
+ MX6QDL_PAD_EIM_A24__GPIO5_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_i2c1_novena: i2c1grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c2_novena: i2c2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_i2c3_novena: i2c3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1
+ MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1
+ >;
+ };
+
+ pinctrl_kpp_novena: kppgrp-novena {
+ fsl,pins = <
+ /* Front panel button */
+ MX6QDL_PAD_KEY_ROW1__KEY_ROW1 0x1b0b1
+ /* Fake column driver, not connected */
+ MX6QDL_PAD_KEY_COL1__KEY_COL1 0x1b0b1
+ >;
+ };
+
+ pinctrl_leds_novena: ledsgrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD1_DAT3__GPIO1_IO21 0x1b0b1
+ >;
+ };
+
+ pinctrl_pcie_novena: pciegrp-novena {
+ fsl,pins = <
+ /* Reset */
+ MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x1b0b1
+ /* Power On */
+ MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x1b0b1
+ /* Wifi kill */
+ MX6QDL_PAD_EIM_A22__GPIO2_IO16 0x1b0b1
+ >;
+ };
+
+ pinctrl_sata_novena: satagrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D30__GPIO3_IO30 0x1b0b1
+ >;
+ };
+
+ pinctrl_senoko_novena: senokogrp-novena {
+ fsl,pins = <
+ /* Senoko IRQ line */
+ MX6QDL_PAD_SD1_CLK__GPIO1_IO20 0x13048
+ /* Senoko reset line */
+ MX6QDL_PAD_CSI0_VSYNC__GPIO5_IO21 0x1b0b1
+ >;
+ };
+
+ pinctrl_sound_novena: soundgrp-novena {
+ fsl,pins = <
+ /* Audio power regulator */
+ MX6QDL_PAD_DISP0_DAT23__GPIO5_IO17 0x1b0b1
+ /* Headphone plug */
+ MX6QDL_PAD_DISP0_DAT21__GPIO5_IO15 0x1b0b1
+ MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x000b0
+ >;
+ };
+
+ pinctrl_stmpe_novena: stmpegrp-novena {
+ fsl,pins = <
+ /* Touchscreen interrupt */
+ MX6QDL_PAD_DISP0_DAT19__GPIO5_IO13 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart2_novena: uart2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart3_novena: uart3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
+ MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_uart4_novena: uart4grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1
+ MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1
+ >;
+ };
+
+ pinctrl_usbotg_novena: usbotggrp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
+ >;
+ };
+
+ pinctrl_usdhc2_novena: usdhc2grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD2_CMD__SD2_CMD 0x170f9
+ MX6QDL_PAD_SD2_CLK__SD2_CLK 0x100f9
+ MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x170f9
+ MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x170f9
+ MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x170f9
+ MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x170f9
+ /* Write protect */
+ MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x1b0b1
+ /* Card detect */
+ MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x1b0b1
+ >;
+ };
+
+ pinctrl_usdhc3_novena: usdhc3grp-novena {
+ fsl,pins = <
+ MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9
+ MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9
+ MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9
+ MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9
+ MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9
+ MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9
+ >;
+ };
+};
--
2.1.4
More information about the linux-arm-kernel
mailing list