[PATCH 1/4] ARM: dts: qcom: apq8064-ifc6410 Use hardware flow control for GSBI6

[Srinivas Kandagatla]

From: "Ivan T. Ivanov" <ivan.ivanov at linaro.org>

GSBI6 UART module is connected to BT chip, which uses
hardware flow control lines. Enable them on SoC side.

Signed-off-by: Ivan T. Ivanov <ivan.ivanov at linaro.org>
---
 arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
index 11ac608..80c6695 100644
--- a/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
+++ b/arch/arm/boot/dts/qcom-apq8064-ifc6410.dts
@@ -164,7 +164,7 @@
 
 		gsbi at 16500000 {
 			status = "ok";
-			qcom,mode = <GSBI_PROT_I2C_UART>;
+			qcom,mode = <GSBI_PROT_UART_W_FC>;
 
 			serial at 16540000 {
 				status = "ok";
-- 
1.9.1