[PATCH v2 2/3] ehci-platform: Add support for controllers with multiple reset lines

[Philipp Zabel]

Am Freitag, den 11.12.2015, 16:41 +0100 schrieb Hans de Goede:
> From: Reinder de Haan <patchesrdh at mveas.com>
> 
> At least the EHCI/OHCI found on the Allwinnner H3 SoC needs multiple
> reset lines, the controller will not initialize while the reset for
> its companion is still asserted, which means we need to de-assert
> 2 resets for the controller to work.
> 
> Signed-off-by: Reinder de Haan <patchesrdh at mveas.com>
> Signed-off-by: Hans de Goede <hdegoede at redhat.com>
> ---
> Changes in v2:
> -Use the new reset_control_[de]assert_shared reset-controller functions
> ---
>  Documentation/devicetree/bindings/usb/usb-ehci.txt |  2 +-
>  drivers/usb/host/ehci-platform.c                   | 47 +++++++++++++---------
>  2 files changed, 30 insertions(+), 19 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> index a12d601..0701812 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> @@ -18,7 +18,7 @@ Optional properties:
>   - clocks : a list of phandle + clock specifier pairs
>   - phys : phandle + phy specifier pair
>   - phy-names : "usb"
> - - resets : phandle + reset specifier pair
> + - resets : a list of phandle + reset specifier pairs

Are there documented names for these resets? Is the companion you
mention the Port Control?

regards
Philipp