[PATCH v3 7/7] ARM: dts: add dts files for Hi3519
Rob Herring
robh at kernel.org
Fri Dec 11 08:28:47 PST 2015
On Fri, Dec 11, 2015 at 03:45:21PM +0800, Jiancheng Xue wrote:
> add dts files for Hi3519
>
> Signed-off-by: Jiancheng Xue <xuejiancheng at huawei.com>
> ---
> arch/arm/boot/dts/Makefile | 2 +
> arch/arm/boot/dts/hi3519-demb.dts | 42 +++++++++++
> arch/arm/boot/dts/hi3519.dtsi | 142 ++++++++++++++++++++++++++++++++++++++
> 3 files changed, 186 insertions(+)
> create mode 100644 arch/arm/boot/dts/hi3519-demb.dts
> create mode 100644 arch/arm/boot/dts/hi3519.dtsi
>
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index 30bbc37..1ff3ed9 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -135,6 +135,8 @@ dtb-$(CONFIG_ARCH_EXYNOS5) += \
> exynos5800-peach-pi.dtb
> dtb-$(CONFIG_ARCH_HI3xxx) += \
> hi3620-hi4511.dtb
> +dtb-$(CONFIG_ARCH_HISI) += \
> + hi3519-demb.dtb
> dtb-$(CONFIG_ARCH_HIX5HD2) += \
> hisi-x5hd2-dkb.dtb
> dtb-$(CONFIG_ARCH_HIGHBANK) += \
> diff --git a/arch/arm/boot/dts/hi3519-demb.dts b/arch/arm/boot/dts/hi3519-demb.dts
> new file mode 100644
> index 0000000..6991ab6
> --- /dev/null
> +++ b/arch/arm/boot/dts/hi3519-demb.dts
> @@ -0,0 +1,42 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +/dts-v1/;
> +#include "hi3519.dtsi"
> +
> +/ {
> + model = "HiSilicon HI3519 DEMO Board";
> + compatible = "hisilicon,hi3519";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + memory {
> + device_type = "memory";
> + reg = <0x80000000 0x40000000>;
> + };
> +};
> +
> +&uart0 {
> + status = "okay";
> +};
> +
> +&dual_timer0 {
> + status = "okay";
> +};
> diff --git a/arch/arm/boot/dts/hi3519.dtsi b/arch/arm/boot/dts/hi3519.dtsi
> new file mode 100644
> index 0000000..50b736e
> --- /dev/null
> +++ b/arch/arm/boot/dts/hi3519.dtsi
> @@ -0,0 +1,142 @@
> +/*
> + * Copyright (c) 2015 HiSilicon Technologies Co., Ltd.
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms of the GNU General Public License as published by the
> + * Free Software Foundation; either version 2 of the License, or (at your
> + * option) any later version.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + *
> + * You should have received a copy of the GNU General Public License
> + * along with this program. If not, see <http://www.gnu.org/licenses/>.
> + *
> + */
> +
> +#include "skeleton.dtsi"
Don't include skeleton.dtsi. We've decided it was a bad idea.
> +#include <dt-bindings/clock/hi3519-clock.h>
> +/ {
> + cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu at 0 {
Single core system? Add the other cpu nodes if not. Adding them doesn't
have to be in sync with SMP kernel support.
> + device_type = "cpu";
> + compatible = "arm,cortex-a7";
> + reg = <0>;
> + };
> + };
> +
> + gic: interrupt-controller at 10300000 {
> + compatible = "arm,cortex-a7-gic";
> + #interrupt-cells = <3>;
> + interrupt-controller;
> + reg = <0x10301000 0x1000>, <0x10302000 0x1000>;
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "simple-bus";
> + interrupt-parent = <&gic>;
> + ranges;
Looks like everything is in 0x12xxxxxx range, so you should add actual
translation here if that's the case.
> +
> + amba {
Is this actually a separate bus in the physical design of the chip?
> + #address-cells = <1>;
> + #size-cells = <1>;
> + compatible = "arm,amba-bus";
Just simple-bus. "arm,amba-bus" is not any type of bus, nor is it
documented.
> + ranges;
> +
> + uart0: serial at 12100000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12100000 0x1000>;
> + interrupts = <0 4 4>;
> + clocks = <&crg HI3519_UART0_CLK>;
> + clock-names = "apb_pclk";
> + status = "disable";
> + };
> +
> + uart1: serial at 12101000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12101000 0x1000>;
> + interrupts = <0 5 4>;
> + clocks = <&crg HI3519_UART1_CLK>;
> + clock-names = "apb_pclk";
> + status = "disable";
> + };
> +
> + uart2: serial at 12102000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12102000 0x1000>;
> + interrupts = <0 6 4>;
> + clocks = <&crg HI3519_UART2_CLK>;
> + clock-names = "apb_pclk";
> + status = "disable";
> + };
> +
> + uart3: serial at 12103000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12103000 0x1000>;
> + interrupts = <0 7 4>;
> + clocks = <&crg HI3519_UART3_CLK>;
> + clock-names = "apb_pclk";
> + status = "disable";
> + };
> +
> + uart4: serial at 12104000 {
> + compatible = "arm,pl011", "arm,primecell";
> + reg = <0x12104000 0x1000>;
> + interrupts = <0 8 4>;
> + clocks = <&crg HI3519_UART4_CLK>;
> + clock-names = "apb_pclk";
> + status = "disable";
> + };
> +
> + dual_timer0: timer at 12000000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <0 64 4>, <0 65 4>;
> + reg = <0x12000000 0x1000>;
> + clocks = <&crg HI3519_FIXED_3M>;
> + status = "disable";
> + };
> +
> + dual_timer1: timer at 12001000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <0 66 4>, <0 67 4>;
> + reg = <0x12001000 0x1000>;
> + clocks = <&crg HI3519_FIXED_3M>;
> + status = "disable";
> + };
> +
> + dual_timer2: timer at 12002000 {
> + compatible = "arm,sp804", "arm,primecell";
> + interrupts = <0 68 4>, <0 69 4>;
> + reg = <0x12002000 0x1000>;
> + clocks = <&crg HI3519_FIXED_3M>;
> + status = "disable";
> + };
> + };
> +
> + sysctrl: system-controller at 12020000 {
> + compatible = "hisilicon,hi3519-sysctrl", "syscon";
> + reg = <0x12020000 0x1000>;
> + };
> +
> + reboot {
> + compatible = "syscon-reboot";
> + regmap = <&sysctrl>;
> + offset = <0x4>;
> + mask = <0xdeadbeef>;
> + };
> +
> + crg: clock-reset-controller at 12010000 {
> + compatible = "hisilicon,hi3519-crg";
> + #clock-cells = <1>;
> + #reset-cells = <2>;
> + reg = <0x12010000 0x10000>;
> + };
> + };
> +};
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe devicetree" in
> the body of a message to majordomo at vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
More information about the linux-arm-kernel
mailing list