[PATCH 1/3] ARM: dts: imx: Add basic dts support for imx6qp

[Bai Ping]

On 2015/12/11 19:37, Fabio Estevam wrote:
> On Fri, Dec 11, 2015 at 8:45 AM, Bai Ping <b51503 at freescale.com> wrote:
>> The i.MX6Qual Plus processor is an high performance SOC of i.MX6 family.
>> It has enhanced graphics performance and increased overall memory bandwidth
>> compared to i.MX6Q. Most of the design are same as i.MX6Qual/Dual, so code
>> for i.MX6Qual can be resued by this chip. The revision number is identied as
>> i.MX6Q Rev2.0, but actually it is a new chip, as we did many change to the
>> overall architecture.
>>
>> This patch adds basic dts file for the new i.MX6Qual Plus processor.
>>
>> Signed-off-by: Bai Ping <b51503 at freescale.com>
>> ---
>>   arch/arm/boot/dts/Makefile                |   2 +
>>   arch/arm/boot/dts/imx6q.dtsi              |   2 +-
>>   arch/arm/boot/dts/imx6qdl-sabresd.dtsi    |   1 +
>>   arch/arm/boot/dts/imx6qp-sabreauto.dts    |  67 +++++++++++++
>>   arch/arm/boot/dts/imx6qp-sabresd.dts      |  59 +++++++++++
>>   arch/arm/boot/dts/imx6qp.dtsi             | 157 ++++++++++++++++++++++++++++++
>>   include/dt-bindings/clock/imx6qdl-clock.h |  16 ++-
> Better split this in three patches:
>
> - Add imx6qp SoC support
> - Add imx6qdl-sabresd support
> - Add imx6qp-sabreauto support
ok, I will spit this in Patch V2. thanks for you review.

Jacky Bai