[PATCH v5 0/9] mfd: axp20x: Add support for RSB based AXP223

[Chen-Yu Tsai]

Hi Lee,

On Fri, Nov 27, 2015 at 2:43 PM, Chen-Yu Tsai <wens at csie.org> wrote:
> Hi everyone,
>
> This is v5 of the AXP223 PMIC series. v5 cleans up the code before and
> after the axp20x split, as suggested by Andy.

Any chance you could merge this series (patches 1~7) for 4.5?

The DTS patches can't be merged without the driver updates, and we'd
like to get both parts in.

> Changes since v4:
>
>   - Get rid of second parameter of axp20x_match_device() (new patch 2)
>
>   - Match against dev->driver->of_match_table, so the entirety of
>     axp20x_match_device() can be kept in the core. (new patch 3)
>
>   - Move *_device_id tables to bottom of the driver, right above driver
>     declaration. (patch 4 & 6)
>
>   - Remove extra whitespaces while moving i2c specific code (patch 4)
>
>   - Remove leftover whitespace and code style issues in axp20x core
>     (new patch 5)
>
>   - Remove extra whitespaces in rsb specific code (patch 6)
>
> Changes since v3:
>
>   - Removed settings for axp223 reg_rtc_ldo from board dts files that
>     are already in axp22x.dtsi. The name is kept.
>
>   - Dropped simplefb label and defconfig patches, as they are merged.
>
> Changes since v2:
>
>   - s/It's/Its/ for the commit messages of patches 5 and 7
>
>   - Add Rob's Acked-by for patch 1
>
> Changes since v1:
>
>   - Dropped NMI interrupt controller dts patch (Merged)
>
>   - Change MFD_AXP20X to represent the axp20x core, and drop MFD_AXP20X_CORE
>
>   - Keep the axp20x core bits named axp20x.c
>
>   - Add patch 7 to add AXP223 to sun8i-q8-common.dtsi
>
>   - Add patch 8 & 9 to update defconfigs
>
>   - Make axp20x drivers tristate and buildable as modules
>
>   - Drop "_sunxi" substring from identifiers in axp20x-rsb driver
>
>
> This series adds support for the Reduced Serial Bus based AXP223 PMIC.
> The AXP223 is functionally identical to the AXP221, which we already
> support. Only some default values for the regulators are different.
> The defaults fit their recommended application, paired with different
> SoCs.
>

Updated description:

Patch 1 adds AXP223 to the list of supported chips in the DT binding.

Patch 2 gets rid of the extra "struct device *" parameter from
axp20x_match_device().

Patch 3 makes axp20x_match_device() use dev->driver->of_match_table,
so the function can be library-ized without modification.

Patch 4 splits the axp20x mfd driver into 2 parts, a core library, and
an I2C driver.

Patch 5 cleans up some leftover whitespace issues in axp20x core.

Patch 6 adds an RSB based driver for the AXP223.

Patch 7 adds support for the AXP223 regulators

Patch 8 enables the AXP223 PMIC and its regulators for the Sinlinx
SinA33.

Patch 9 enables the AXP223 PMIC and its regulators for A23/A33 based
Q8 tablet devices.


Regards
ChenYu

>
> Chen-Yu Tsai (9):
>   mfd: axp20x: Add AXP223 to list of supported PMICs in DT bindings
>   mfd: axp20x: Remove second struct device * parameter for
>     axp20x_match_device()
>   mfd: axp20x: use dev->driver->of_match_table in axp20x_match_device()
>   mfd: axp20x: Split the driver into core and i2c bits
>   mfd: axp20x: Whitespace, open parenthesis alignment code style fixes
>   mfd: axp20x: Add support for RSB based AXP223 PMIC
>   regulator: axp20x: Support new AXP223 PMIC
>   ARM: dts: sun8i: sinlinx-sina33: Add AXP223 PMIC device and regulator
>     nodes
>   ARM: dts: sun8i: q8-common: Add AXP223 PMIC device and regulator nodes
>
>  Documentation/devicetree/bindings/mfd/axp20x.txt |   7 +-
>  arch/arm/boot/dts/sun8i-a33-sinlinx-sina33.dts   |  76 ++++++++++++++++-
>  arch/arm/boot/dts/sun8i-q8-common.dtsi           |  83 +++++++++++++++++-
>  drivers/mfd/Kconfig                              |  25 ++++--
>  drivers/mfd/Makefile                             |   2 +
>  drivers/mfd/axp20x-i2c.c                         | 102 +++++++++++++++++++++++
>  drivers/mfd/axp20x-rsb.c                         |  78 +++++++++++++++++
>  drivers/mfd/axp20x.c                             | 101 +++++-----------------
>  drivers/regulator/axp20x-regulator.c             |   3 +
>  include/linux/mfd/axp20x.h                       |  34 +++++++-
>  10 files changed, 418 insertions(+), 93 deletions(-)
>  create mode 100644 drivers/mfd/axp20x-i2c.c
>  create mode 100644 drivers/mfd/axp20x-rsb.c
>
> --
> 2.6.2
>