[PATCH RFC 2/4] ARM: bcm2835: rename sdhci pin group

[Stephen Warren]

On 12/05/2015 02:43 AM, Stefan Wahren wrote:
> 
>> Stephen Warren <swarren at wwwdotorg.org> hat am 2. Dezember 2015 um 04:42
>> geschrieben:
>>
>>
>> On 11/19/2015 09:06 AM, Stefan Wahren wrote:
>>> The node name of the sdhci pin group doesn't explain it's
>>> real function. So rename it.
>>
>> The real function of this node is not to configure SDHCI pins, but to
>> set pins to alt3, as the current name states. Admittedly it's possible
>> that currently the only pins that need to be set to ALT3 are SDHCI
>> related, but that's incidental.
> 
> Yes, i understand the original intension to assign every pin to the available
> mux functions ( gpio_in, gpio_out, alt* ).
> 
> But 3f37169fb3 ("ARM: bcm2835: dt: Add Raspberry Pi Model B rev2") introduce a

FYI I don't have that yet and git fetch is being very slow right now:-(

> better self-describing pin group naming for I2S. So my idea was to adapt it
> according to sdhci first and go on.

OK. I'd suggest explaining that directly in the commit description then.
The commit description above has a quite different semantic meaning.

> So here is a possible vision for bcm2835-rpi.dtsi
> 
> &gpio {
> 	pinctrl-names = "default";
> 
> 	act_gpio: gpio {
> 		brcm,pins = <6>;
> 		brcm,function = <BCM2835_FSEL_GPIO_OUT>;
> 	};
> 
> 	i2c0_alt0: i2c {
> 		brcm,pins = <0 1>;
> 		brcm,function = <BCM2835_FSEL_ALT0>;
> 	};
> 
> 	i2c1_alt0: i2c {
> 		brcm,pins = <2 3>;
> 		brcm,function = <BCM2835_FSEL_ALT0>;
> 	};
...

OK, I guess that can work; I imagine it would make DT overlays easier by
making the pinctrl setup more fine-grained.