[PATCH v1 7/8] ARM: dts: rockchip: add core rk3228 dtsi
Jeffy Chen
jeffy.chen at rock-chips.com
Thu Dec 10 17:53:59 PST 2015
Hi Heiko,
On 2015-12-10 8:32, Heiko Stuebner wrote:
> Hi Jeffy,
>
> Am Mittwoch, 9. Dezember 2015, 17:04:12 schrieb Jeffy Chen:
>> Initial release for rk3228 shared dtsi.
>>
>> Signed-off-by: Jeffy Chen <jeffy.chen at rock-chips.com>
>> ---
>>
>> arch/arm/boot/dts/rk3228.dtsi | 478 ++++++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 478 insertions(+)
>> create mode 100644 arch/arm/boot/dts/rk3228.dtsi
>>
>> diff --git a/arch/arm/boot/dts/rk3228.dtsi b/arch/arm/boot/dts/rk3228.dtsi
>> new file mode 100644
>> index 0000000..d6b3e40
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/rk3228.dtsi
>> @@ -0,0 +1,478 @@
>> +/*
>> + * This file is dual-licensed: you can use it either under the terms
>> + * of the GPL or the X11 license, at your option. Note that this dual
>> + * licensing only applies to this file, and not this project as a
>> + * whole.
>> + *
>> + * a) This file is free software; you can redistribute it and/or
>> + * modify it under the terms of the GNU General Public License as
>> + * published by the Free Software Foundation; either version 2 of the
>> + * License, or (at your option) any later version.
>> + *
>> + * This file is distributed in the hope that it will be useful,
>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
>> + * GNU General Public License for more details.
>> + *
>> + * Or, alternatively,
>> + *
>> + * b) Permission is hereby granted, free of charge, to any person
>> + * obtaining a copy of this software and associated documentation
>> + * files (the "Software"), to deal in the Software without
>> + * restriction, including without limitation the rights to use,
>> + * copy, modify, merge, publish, distribute, sublicense, and/or
>> + * sell copies of the Software, and to permit persons to whom the
>> + * Software is furnished to do so, subject to the following
>> + * conditions:
>> + *
>> + * The above copyright notice and this permission notice shall be
>> + * included in all copies or substantial portions of the Software.
>> + *
>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
>> + * OTHER DEALINGS IN THE SOFTWARE.
>> + */
>> +
>> +#include <dt-bindings/gpio/gpio.h>
>> +#include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/interrupt-controller/arm-gic.h>
>> +#include <dt-bindings/pinctrl/rockchip.h>
>> +#include <dt-bindings/clock/rk3228-cru.h>
>> +#include "skeleton.dtsi"
>> +
>> +/ {
>> + compatible = "rockchip,rk3228";
>> +
>> + interrupt-parent = <&gic>;
>> +
>> + aliases {
>> + serial0 = &uart0;
>> + serial1 = &uart1;
>> + serial2 = &uart2;
>> + };
>> +
>> + memory {
>> + device_type = "memory";
>> + reg = <0x60000000 0x40000000>;
>> + };
> The amount of memory is a property of the board
done.
>> +
>> + cpus {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
> no enable-method?
>
> As the rk3228 also does not have a pmu, does the newly created
> "rockchip,rk3036-smp" work for you?
unlucky, that doesn't work...and our 3.10 kernel is using psci for
rk3228's smp ops, maybe i should check that too, but i know nothing
about psci for now :(
>> +
>> + cpu0: cpu at f00 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0xf00>;
>> + resets = <&cru SRST_CORE0>;
>> + operating-points = <
>> + /* KHz uV */
>> + 816000 1000000
>> + >;
>> + clock-latency = <40000>;
>> + clocks = <&cru ARMCLK>;
>> + };
>> +
>> + cpu1: cpu at f01 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0xf01>;
>> + resets = <&cru SRST_CORE1>;
>> + };
>> +
>> + cpu2: cpu at f02 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0xf02>;
>> + resets = <&cru SRST_CORE2>;
>> + };
>> +
>> + cpu3: cpu at f03 {
>> + device_type = "cpu";
>> + compatible = "arm,cortex-a7";
>> + reg = <0xf03>;
>> + resets = <&cru SRST_CORE3>;
>> + };
>> + };
>> +
>> + amba {
>> + compatible = "arm,amba-bus";
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + pdma: pdma at 110f0000 {
>> + compatible = "arm,pl330", "arm,primecell";
>> + reg = <0x110f0000 0x4000>;
>> + interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
>> + #dma-cells = <1>;
>> + clocks = <&cru ACLK_DMAC>;
>> + clock-names = "apb_pclk";
>> + };
>> + };
>> +
>> + arm-pmu {
>> + compatible = "arm,cortex-a7-pmu";
>> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>,
>> + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
>> + interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
>> + };
>> +
>> + timer {
>> + compatible = "arm,armv7-timer";
>> + arm,cpu-registers-not-fw-configured;
>> + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>,
>> + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
>> + clock-frequency = <24000000>;
>> + };
>> +
>> + hdmiphy_phy: hdmiphy_phy {
>> + compatible = "fixed-clock";
>> + clock-frequency = <594000000>;
>> + clock-output-names = "hdmiphy_phy";
>> + #clock-cells = <0>;
>> + };
>> +
>> + phy_50m_out: phy_50m_out {
>> + compatible = "fixed-clock";
>> + clock-frequency = <50000000>;
>> + clock-output-names = "phy_50m_out";
>> + #clock-cells = <0>;
>> + };
>> +
>> + usb480m_phy0: usb480m_phy0 {
>> + compatible = "fixed-clock";
>> + clock-frequency = <480000000>;
>> + clock-output-names = "usb480m_phy0";
>> + #clock-cells = <0>;
>> + };
>> +
>> + usb480m_phy1: usb480m_phy1 {
>> + compatible = "fixed-clock";
>> + clock-frequency = <480000000>;
>> + clock-output-names = "usb480m_phy1";
>> + #clock-cells = <0>;
>> + };
> these clocks starting with hdmiphy clock come from IPs in the soc, so the
> relevant drivers should provide them (see my patch series for the picophy,
> or how rk808 and hym8563 do it) - especially as these clocks might get
> turned off in the IP-block itself.
>
> The clock framework can handle orphans, so just leave these out for now
> please.
you're right, done.
>
>> +
>> + xin24m: oscillator {
>> + compatible = "fixed-clock";
>> + clock-frequency = <24000000>;
>> + clock-output-names = "xin24m";
>> + #clock-cells = <0>;
>> + };
>> +
>> + cru: clock-controller at 110e0000 {
>> + compatible = "rockchip,rk3228-cru";
>> + reg = <0x110e0000 0x1000>;
>> + rockchip,grf = <&grf>;
>> + #clock-cells = <1>;
>> + #reset-cells = <1>;
>> + assigned-clocks = <&cru PLL_GPLL>;
>> + assigned-clock-rates = <594000000>;
>> + };
>> +
>> + gic: interrupt-controller at 32010000 {
> please order by register address, so gic should move quite
> a bit lower.
done.
>> + compatible = "arm,gic-400";
>> + interrupt-controller;
>> + #interrupt-cells = <3>;
>> + #address-cells = <0>;
>> +
>> + reg = <0x32011000 0x1000>,
>> + <0x32012000 0x1000>;
> please also provide the vgic registers and interrupt.
done.
>
>> + };
>> +
>> + grf: syscon at 11000000 {
>> + compatible = "syscon";
>> + reg = <0x11000000 0x1000>;
>> + };
>> +
>> + timer: timer at 110c0000 {
>> + compatible = "rockchip,rk3288-timer";
>> + reg = <0x110c0000 0x20>;
>> + interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&xin24m>, <&cru PCLK_TIMER>;
>> + clock-names = "timer", "pclk";
>> + };
>> +
>> + emmc: dwmmc at 30020000 {
>> + compatible = "rockchip,rk3288-dw-mshc";
>> + clock-frequency = <37500000>;
>> + clock-freq-min-max = <400000 37500000>;
>> + clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>,
>> + <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>;
>> + clock-names = "biu", "ciu", "ciu_drv", "ciu_sample";
>> + fifo-depth = <0x100>;
>> + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0x30020000 0x4000>;
>> + broken-cd;
>> + bus-width = <8>;
>> + cap-mmc-highspeed;
>> + mmc-ddr-1_8v;
>> + disable-wp;
>> + non-removable;
>> + num-slots = <1>;
>> + default-sample-phase = <158>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&emmc_clk &emmc_cmd &emmc_bus8>;
> please separate board and core properties.
> broken-cd, cap-*, mmc-ddr-1_8v, disable-wp, non-removable
> are per-board properties as they depend on what is connected to
> the controller.
done.
>> + status = "disabled";
>> + };
>> +
>> + pwm0: pwm at 110b0000 {
>> + compatible = "rockchip,rk3288-pwm";
>> + reg = <0x110b0000 0x10>;
>> + #pwm-cells = <3>;
>> + clocks = <&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pwm0_pin>;
>> + status = "disabled";
>> + };
>> +
>> + pwm1: pwm at 110b0010 {
>> + compatible = "rockchip,rk3288-pwm";
>> + reg = <0x110b0010 0x10>;
>> + #pwm-cells = <3>;
>> + clocks = <&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pwm1_pin>;
>> + status = "disabled";
>> + };
>> +
>> + pwm2: pwm at 110b0020 {
>> + compatible = "rockchip,rk3288-pwm";
>> + reg = <0x110b0020 0x10>;
>> + #pwm-cells = <3>;
>> + clocks = <&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pwm2_pin>;
>> + status = "disabled";
>> + };
>> +
>> + pwm3: pwm at 110b0030 {
>> + compatible = "rockchip,rk3288-pwm";
>> + reg = <0x110b0030 0x10>;
>> + #pwm-cells = <2>;
>> + clocks = <&cru PCLK_PWM>;
>> + clock-names = "pwm";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pwm3_pin>;
>> + status = "disabled";
>> + };
>> +
>> + uart0: serial at 11010000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x11010000 0x100>;
>> + interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <24000000>;
>> + clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
>> + clock-names = "baudclk", "apb_pclk";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>;
>> + status = "disabled";
>> + };
>> +
>> + uart1: serial at 11020000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x11020000 0x100>;
>> + interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <24000000>;
>> + clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
>> + clock-names = "baudclk", "apb_pclk";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart1_xfer>;
>> + status = "disabled";
>> + };
>> +
>> + uart2: serial at 11030000 {
>> + compatible = "snps,dw-apb-uart";
>> + reg = <0x11030000 0x100>;
>> + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
>> + reg-shift = <2>;
>> + reg-io-width = <4>;
>> + clock-frequency = <24000000>;
>> + clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
>> + clock-names = "baudclk", "apb_pclk";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&uart2_xfer>;
>> + status = "disabled";
>> + };
>> +
>> +
>> + pinctrl: pinctrl {
>> + compatible = "rockchip,rk3228-pinctrl";
>> + rockchip,grf = <&grf>;
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + ranges;
>> +
>> + gpio0: gpio0 at 11110000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x11110000 0x100>;
>> + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru PCLK_GPIO0>;
>> +
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio1: gpio1 at 11120000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x11120000 0x100>;
>> + interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru PCLK_GPIO1>;
>> +
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio2: gpio2 at 11130000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x11130000 0x100>;
>> + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru PCLK_GPIO2>;
>> +
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + gpio3: gpio3 at 11140000 {
>> + compatible = "rockchip,gpio-bank";
>> + reg = <0x11140000 0x100>;
>> + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>;
>> + clocks = <&cru PCLK_GPIO3>;
>> +
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> +
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + };
>> +
>> + pcfg_pull_up: pcfg-pull-up {
>> + bias-pull-up;
>> + };
>> +
>> + pcfg_pull_down: pcfg-pull-down {
>> + bias-pull-down;
>> + };
>> +
>> + pcfg_pull_none: pcfg-pull-none {
>> + bias-disable;
>> + };
>> +
>> + emmc {
>> + emmc_clk: emmc-clk {
>> + rockchip,pins = <2 7 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> +
>> + emmc_cmd: emmc-cmd {
>> + rockchip,pins = <1 22 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> +
>> + emmc_bus8: emmc-bus8 {
>> + rockchip,pins = <1 24 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 25 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 26 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 27 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 28 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 29 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 30 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 31 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm0 {
>> + pwm0_pin: pwm0-pin {
>> + rockchip,pins = <3 21 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm1 {
>> + pwm1_pin: pwm1-pin {
>> + rockchip,pins = <0 30 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm2 {
>> + pwm2_pin: pwm2-pin {
>> + rockchip,pins = <1 12 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + pwm3 {
>> + pwm3_pin: pwm3-pin {
>> + rockchip,pins = <1 11 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + uart0 {
>> + uart0_xfer: uart0-xfer {
>> + rockchip,pins = <2 26 RK_FUNC_1 &pcfg_pull_none>,
>> + <2 27 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> +
>> + uart0_cts: uart0-cts {
>> + rockchip,pins = <2 29 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> +
>> + uart0_rts: uart0-rts {
>> + rockchip,pins = <0 17 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + uart1 {
>> + uart1_xfer: uart1-xfer {
>> + rockchip,pins = <1 9 RK_FUNC_1 &pcfg_pull_none>,
>> + <1 10 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> +
>> + uart1_cts: uart1-cts {
>> + rockchip,pins = <1 8 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> +
>> + uart1_rts: uart1-rts {
>> + rockchip,pins = <1 11 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> + };
>> +
>> + uart2 {
>> + uart2_xfer: uart2-xfer {
>> + rockchip,pins = <1 18 RK_FUNC_2 &pcfg_pull_none>,
>> + <1 19 RK_FUNC_2 &pcfg_pull_none>;
>> + };
>> +
>> + uart2_cts: uart2-cts {
>> + rockchip,pins = <0 25 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> +
>> + uart2_rts: uart2-rts {
>> + rockchip,pins = <0 24 RK_FUNC_1 &pcfg_pull_none>;
>> + };
>> + };
>> + };
>> +};
>>
>
More information about the linux-arm-kernel
mailing list