[PATCH v2 4/9] ARM: dts: add dts files for hi3519-demb board

[xuejiancheng]

On 2015/12/9 23:31, Arnd Bergmann wrote:
> On Tuesday 08 December 2015 11:54:51 xuejiancheng wrote:
>> On 2015/12/7 14:37, xuejiancheng wrote:
>>>
>>> On 2015/12/4 18:49, Arnd Bergmann wrote:
>>>> On Friday 04 December 2015 10:27:58 xuejiancheng wrote:
>>>>>>
>>>> Maybe split out the sysctrl binding from
>>>> Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt, as it has
>>>> you already have a couple of those, and it's not clear how they relate
>>>> to one another.
>>>>
>>>> If we introduce a string for all hip04 compatible sysctrl devices, we should
>>>> document that and use it consistently, so hi3519 becomes
>>>>
>>>>      compatible = "hisilicon,hi3519-sysctrl", "hisilicon,hip04-sysctrl", "hisilicon,sysctrl";
>>>>
>>>> but I'd clarify in the binding documentation that "hisilicon,sysctrl" should
>>>> only be used for hip04 and hi3519 but not the others.
>>>>
>>>> As this seems to be a standard part, we can also think about making a
>>>> high-level driver for in in drivers/soc rather than relying on the syscon
>>>> driver which we tend to use more for one-off devices with random register
>>>> layouts.
>>>>
>>>    Sorry. I didn't understand your meaning well and maybe I gave you a wrong description.
>>> Please allow me to clarify it again.
>>>    The "sysctrl" nodes here is just used for the "reboot" function. It is corresponding to
>>> the driver "drivers/power/reset/hisi-reboot.c". The compatible string in the driver is
>>> "hisilicon,sysctrl".
>>>    The layout of this block is also different from the one in HiP04.
>>
>> I'll use "syscon" as the compatible value for sysctrl node and "syscon-reboot" for a new reboot node.
>>
>>
> 
> This is not what I meant. You have to use "syscon" as the most generic
> "compatible" value here, but should add a machine specific string
> as a more specific one. "hisilicon,sysctrl" is not appropriate because
> it does not identify the IP block uniquely, you can only use that
> in combination with another more specific string.

OK. I will use "hisilicon,hi3519-syscon" and "syscon" as the compatible value
for the sysctrl node in hi3519.dtsi.

Thank you!

> 
> That way, we have to option to create a high-level driver for the IP
> block later if it turns out that we need some more generic functionality
> that is provided by those registers.
> 
> 	Arnd
> 
> .
>