[PATCH 1/2] acpi:apd: Add APM X-Gene ACPI I2C device support

[Ken Xue]

On Wed, 2015-12-09 at 14:03 -0800, Loc Ho wrote:
> Hi Ken,
> 
> On Mon, Dec 7, 2015 at 6:49 PM, Ken Xue <ken.xue at amd.com> wrote:
> >
> > On Mon, 2015-12-07 at 17:16 -0700, Loc Ho wrote:
> > > Add APM X-Gene ACPI I2C device support by hooks into existent
> > > ACPI apd driver. To fully enable support, require another
> > > patch to add the X-Gene ACPI node into the DW I2C driver.
> > >
> > > Signed-off-by: Loc Ho <lho at apm.com>
> > > ---
> > >  drivers/acpi/acpi_apd.c |    8 +++++++-
> > >  1 files changed, 7 insertions(+), 1 deletions(-)
> > >
> > > diff --git a/drivers/acpi/acpi_apd.c b/drivers/acpi/acpi_apd.c
> > > index a450e7a..6a9cb8d 100644
> > > --- a/drivers/acpi/acpi_apd.c
> > > +++ b/drivers/acpi/acpi_apd.c
> > > @@ -51,7 +51,7 @@ struct apd_private_data {
> > >       const struct apd_device_desc *dev_desc;
> > >  };
> > >
> > > -#ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
> > > +#if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
> > >  #define APD_ADDR(desc)       ((unsigned long)&desc)
> > >
> > >  static int acpi_apd_setup(struct apd_private_data *pdata)
> > > @@ -76,6 +76,11 @@ static struct apd_device_desc cz_i2c_desc = {
> > >       .fixed_clk_rate = 133000000,
> > >  };
> > >
> > > +static struct apd_device_desc xgene_i2c_desc = {
> > > +     .setup = acpi_apd_setup,
> > > +     .fixed_clk_rate = 100000000,
> > > +};
> > > +
> > >  static struct apd_device_desc cz_uart_desc = {
> > >       .setup = acpi_apd_setup,
> > >       .fixed_clk_rate = 48000000,
> > > @@ -135,6 +140,7 @@ static const struct acpi_device_id acpi_apd_device_ids[] = {
> > >       { "AMD0010", APD_ADDR(cz_i2c_desc) },
> > >       { "AMD0020", APD_ADDR(cz_uart_desc) },
> > >       { "AMD0030", },
> > > +     { "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
> > It is better to split AMD devices and ARM devices with macros:
> > CONFIG_X86_AMD_PLATFORM_DEVICE and CONFIG_ARM64.
> 
> This gets pretty ugly to me with define as it would look like this:
> 
> #if defined(CONFIG_X86_AMD_PLATFORM_DEVICE) || defined(CONFIG_ARM64)
> #define APD_ADDR(desc) ((unsigned long)&desc)
> 
> static int acpi_apd_setup(struct apd_private_data *pdata)
> {
>    .....
> }
> 
> #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
> static struct apd_device_desc cz_i2c_desc = {
>     ....
> };
> 
> static struct apd_device_desc xgene_i2c_desc = {
>     ...
> };
> #endif
> 
> #ifdef CONFIG_ARM64
> static struct apd_device_desc cz_uart_desc = {
>     ....
> };
> #endif
> 
> #else
> 
> #define APD_ADDR(desc) (0UL)
> 
> #endif /* CONFIG_X86_AMD_PLATFORM_DEVICE */
> 
> And...
> 
> #ifdef CONFIG_X86_AMD_PLATFORM_DEVICE
> { "AMD0010", APD_ADDR(cz_i2c_desc) },
> { "AMD0020", APD_ADDR(cz_uart_desc) },
> { "AMD0030", },
> #endif
> #ifdef CONFIG_ARM64
> { "APMC0D0F", APD_ADDR(xgene_i2c_desc) },
> #endif
> 
> Sure you want this?
Yes. Even though it may look like too much macros for just several
devices now. But I think AMD and other ARM socs may also try to leverage
APD for more and more ACPI devices.
It is a good direction that 1)improve efficiency of matching ACPI
handler 2) split devices and potential hook routines into different
classes clearly

It also will be more convenient to move ARM devices out of APD if there
is a new design for ARM ACPI device.