[PATCH v8 3/3] ARM: dts: TS-4800: add basic device tree
Damien Riegel
damien.riegel at savoirfairelinux.com
Tue Dec 8 08:41:38 PST 2015
This device tree adds support for TS-4800 by Technologic Systems. This
board is based on MX51-babbage, but there are some subtle differences in
the pins used, and there is an additional FPGA that is memory-mapped.
More details here:
http://wiki.embeddedarm.com/wiki/TS-4800
Signed-off-by: Damien Riegel <damien.riegel at savoirfairelinux.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/imx51-ts4800.dts | 190 +++++++++++++++++++++++++++++++++++++
2 files changed, 192 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/imx51-ts4800.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bb8fa02..41b9985 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -258,7 +258,8 @@ dtb-$(CONFIG_SOC_IMX51) += \
imx51-apf51dev.dtb \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
- imx51-eukrea-mbimxsd51-baseboard.dtb
+ imx51-eukrea-mbimxsd51-baseboard.dtb \
+ imx51-ts4800.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-m53evk.dtb \
diff --git a/arch/arm/boot/dts/imx51-ts4800.dts b/arch/arm/boot/dts/imx51-ts4800.dts
new file mode 100644
index 0000000..a0b2c6f
--- /dev/null
+++ b/arch/arm/boot/dts/imx51-ts4800.dts
@@ -0,0 +1,190 @@
+/*
+ * Copyright 2015 Savoir-faire Linux
+ *
+ * This device tree is based on imx51-babbage.dts
+ *
+ * The code contained herein is licensed under the GNU General Public
+ * License. You may obtain a copy of the GNU General Public License
+ * Version 2 at the following locations:
+ *
+ * http://www.opensource.org/licenses/gpl-license.html
+ * http://www.gnu.org/copyleft/gpl.html
+ */
+
+/dts-v1/;
+#include "imx51.dtsi"
+
+/ {
+ model = "Technologic Systems TS-4800";
+ compatible = "technologic,imx51-ts4800", "fsl,imx51";
+
+ chosen {
+ stdout-path = &uart1;
+ };
+
+ memory {
+ reg = <0x90000000 0x10000000>;
+ };
+
+ soc {
+ fpga {
+ compatible = "simple-bus";
+ reg = <0xb0000000 0x1d000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ syscon: syscon at b0010000 {
+ compatible = "syscon", "simple-mfd";
+ reg = <0xb0010000 0x3d>;
+ reg-io-width = <2>;
+
+ wdt at e {
+ compatible = "technologic,ts4800-wdt";
+ syscon = <&syscon 0xe>;
+ };
+ };
+ };
+ };
+
+ clocks {
+ ckih1 {
+ clock-frequency = <22579200>;
+ };
+
+ ckih2 {
+ clock-frequency = <24576000>;
+ };
+ };
+};
+
+&esdhc1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_esdhc1>;
+ cd-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio1 1 GPIO_ACTIVE_HIGH>;
+ status = "okay";
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>;
+ phy-mode = "mii";
+ phy-reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
+ phy-reset-duration = <1>;
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ status = "okay";
+};
+
+&i2c2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ status = "okay";
+
+ rtc: m41t00 at 68 {
+ compatible = "stm,m41t00";
+ reg = <0x68>;
+ };
+};
+
+
+&iomuxc {
+ imx51-ts4800 {
+
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <
+ MX51_PAD_CSPI1_MISO__ECSPI1_MISO 0x185
+ MX51_PAD_CSPI1_MOSI__ECSPI1_MOSI 0x185
+ MX51_PAD_CSPI1_SCLK__ECSPI1_SCLK 0x185
+ MX51_PAD_CSPI1_SS0__GPIO4_24 0x85 /* CS0 */
+ >;
+ };
+
+ pinctrl_esdhc1: esdhc1grp {
+ fsl,pins = <
+ MX51_PAD_SD1_CMD__SD1_CMD 0x400020d5
+ MX51_PAD_SD1_CLK__SD1_CLK 0x20d5
+ MX51_PAD_SD1_DATA0__SD1_DATA0 0x20d5
+ MX51_PAD_SD1_DATA1__SD1_DATA1 0x20d5
+ MX51_PAD_SD1_DATA2__SD1_DATA2 0x20d5
+ MX51_PAD_SD1_DATA3__SD1_DATA3 0x20d5
+ MX51_PAD_GPIO1_0__GPIO1_0 0x100
+ MX51_PAD_GPIO1_1__GPIO1_1 0x100
+ >;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <
+ MX51_PAD_EIM_EB2__FEC_MDIO 0x000001f5
+ MX51_PAD_EIM_EB3__FEC_RDATA1 0x00000085
+ MX51_PAD_EIM_CS2__FEC_RDATA2 0x00000085
+ MX51_PAD_EIM_CS3__FEC_RDATA3 0x00000085
+ MX51_PAD_EIM_CS4__FEC_RX_ER 0x00000180
+ MX51_PAD_EIM_CS5__FEC_CRS 0x00000180
+ MX51_PAD_DISP2_DAT10__FEC_COL 0x00000180
+ MX51_PAD_DISP2_DAT11__FEC_RX_CLK 0x00000180
+ MX51_PAD_DISP2_DAT14__FEC_RDATA0 0x00002180
+ MX51_PAD_DISP2_DAT15__FEC_TDATA0 0x00002004
+ MX51_PAD_NANDF_CS2__FEC_TX_ER 0x00002004
+ MX51_PAD_DI2_PIN2__FEC_MDC 0x00002004
+ MX51_PAD_DISP2_DAT6__FEC_TDATA1 0x00002004
+ MX51_PAD_DISP2_DAT7__FEC_TDATA2 0x00002004
+ MX51_PAD_DISP2_DAT8__FEC_TDATA3 0x00002004
+ MX51_PAD_DISP2_DAT9__FEC_TX_EN 0x00002004
+ MX51_PAD_DISP2_DAT13__FEC_TX_CLK 0x00002180
+ MX51_PAD_DISP2_DAT12__FEC_RX_DV 0x000020a4
+ MX51_PAD_EIM_A20__GPIO2_14 0x00000085 /* Phy Reset */
+ >;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <
+ MX51_PAD_KEY_COL4__I2C2_SCL 0x400001ed
+ MX51_PAD_KEY_COL5__I2C2_SDA 0x400001ed
+ >;
+ };
+
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <
+ MX51_PAD_UART1_RXD__UART1_RXD 0x1c5
+ MX51_PAD_UART1_TXD__UART1_TXD 0x1c5
+ MX51_PAD_UART1_RTS__UART1_RTS 0x1c5
+ MX51_PAD_UART1_CTS__UART1_CTS 0x1c5
+ >;
+ };
+
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <
+ MX51_PAD_UART2_RXD__UART2_RXD 0x1c5
+ MX51_PAD_UART2_TXD__UART2_TXD 0x1c5
+ >;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <
+ MX51_PAD_EIM_D25__UART3_RXD 0x1c5
+ MX51_PAD_EIM_D26__UART3_TXD 0x1c5
+ MX51_PAD_EIM_D27__UART3_RTS 0x1c5
+ MX51_PAD_EIM_D24__UART3_CTS 0x1c5
+ >;
+ };
+
+ };
+};
--
2.5.0
More information about the linux-arm-kernel
mailing list