[PATCH v5 1/4] iio: adc: add IMX7D ADC driver support
Haibo Chen
haibo.chen at freescale.com
Tue Dec 8 02:26:20 PST 2015
Freescale i.MX7D soc contains a new ADC IP. This patch add this ADC
driver support, and the driver only support ADC software trigger.
Signed-off-by: Haibo Chen <haibo.chen at freescale.com>
---
drivers/iio/adc/Kconfig | 9 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/imx7d_adc.c | 589 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 599 insertions(+)
create mode 100644 drivers/iio/adc/imx7d_adc.c
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
index 7868c74..3493a46 100644
--- a/drivers/iio/adc/Kconfig
+++ b/drivers/iio/adc/Kconfig
@@ -194,6 +194,15 @@ config HI8435
This driver can also be built as a module. If so, the module will be
called hi8435.
+config IMX7D_ADC
+ tristate "IMX7D ADC driver"
+ depends on ARCH_MXC || COMPILE_TEST
+ help
+ Say yes here to build support for IMX7D ADC.
+
+ This driver can also be built as a module. If so, the module will be
+ called imx7d_adc.
+
config LP8788_ADC
tristate "LP8788 ADC driver"
depends on MFD_LP8788
diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
index 99b37a9..282ffc01 100644
--- a/drivers/iio/adc/Makefile
+++ b/drivers/iio/adc/Makefile
@@ -20,6 +20,7 @@ obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o
obj-$(CONFIG_DA9150_GPADC) += da9150-gpadc.o
obj-$(CONFIG_EXYNOS_ADC) += exynos_adc.o
obj-$(CONFIG_HI8435) += hi8435.o
+obj-$(CONFIG_IMX7D_ADC) += imx7d_adc.o
obj-$(CONFIG_LP8788_ADC) += lp8788_adc.o
obj-$(CONFIG_MAX1027) += max1027.o
obj-$(CONFIG_MAX1363) += max1363.o
diff --git a/drivers/iio/adc/imx7d_adc.c b/drivers/iio/adc/imx7d_adc.c
new file mode 100644
index 0000000..d3511b9
--- /dev/null
+++ b/drivers/iio/adc/imx7d_adc.c
@@ -0,0 +1,589 @@
+/*
+ * Freescale i.MX7D ADC driver
+ *
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/driver.h>
+#include <linux/iio/sysfs.h>
+
+/* ADC register */
+#define IMX7D_REG_ADC_CH_A_CFG1 0x00
+#define IMX7D_REG_ADC_CH_A_CFG2 0x10
+#define IMX7D_REG_ADC_CH_B_CFG1 0x20
+#define IMX7D_REG_ADC_CH_B_CFG2 0x30
+#define IMX7D_REG_ADC_CH_C_CFG1 0x40
+#define IMX7D_REG_ADC_CH_C_CFG2 0x50
+#define IMX7D_REG_ADC_CH_D_CFG1 0x60
+#define IMX7D_REG_ADC_CH_D_CFG2 0x70
+#define IMX7D_REG_ADC_CH_SW_CFG 0x80
+#define IMX7D_REG_ADC_TIMER_UNIT 0x90
+#define IMX7D_REG_ADC_DMA_FIFO 0xa0
+#define IMX7D_REG_ADC_FIFO_STATUS 0xb0
+#define IMX7D_REG_ADC_INT_SIG_EN 0xc0
+#define IMX7D_REG_ADC_INT_EN 0xd0
+#define IMX7D_REG_ADC_INT_STATUS 0xe0
+#define IMX7D_REG_ADC_CHA_B_CNV_RSLT 0xf0
+#define IMX7D_REG_ADC_CHC_D_CNV_RSLT 0x100
+#define IMX7D_REG_ADC_CH_SW_CNV_RSLT 0x110
+#define IMX7D_REG_ADC_DMA_FIFO_DAT 0x120
+#define IMX7D_REG_ADC_ADC_CFG 0x130
+
+#define IMX7D_REG_ADC_CHANNEL_CFG2_BASE 0x10
+#define IMX7D_EACH_CHANNEL_REG_OFFSET 0x20
+
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN (0x1 << 31)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE BIT(30)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN BIT(29)
+#define IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(x) ((x) << 24)
+
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4 (0x0 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8 (0x1 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16 (0x2 << 12)
+#define IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32 (0x3 << 12)
+
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4 (0x0 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8 (0x1 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16 (0x2 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32 (0x3 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64 (0x4 << 29)
+#define IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128 (0x5 << 29)
+
+#define IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN BIT(31)
+#define IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN BIT(1)
+#define IMX7D_REG_ADC_ADC_CFG_ADC_EN BIT(0)
+
+#define IMX7D_REG_ADC_INT_CHA_COV_INT_EN BIT(8)
+#define IMX7D_REG_ADC_INT_CHB_COV_INT_EN BIT(9)
+#define IMX7D_REG_ADC_INT_CHC_COV_INT_EN BIT(10)
+#define IMX7D_REG_ADC_INT_CHD_COV_INT_EN BIT(11)
+#define IMX7D_REG_ADC_INT_CHANNEL_INT_EN (IMX7D_REG_ADC_INT_CHA_COV_INT_EN | \
+ IMX7D_REG_ADC_INT_CHB_COV_INT_EN | \
+ IMX7D_REG_ADC_INT_CHC_COV_INT_EN | \
+ IMX7D_REG_ADC_INT_CHD_COV_INT_EN)
+#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS 0xf00
+#define IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT 0xf0000
+
+#define IMX7D_ADC_TIMEOUT msecs_to_jiffies(100)
+
+enum imx7d_adc_clk_pre_div {
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_4,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_8,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_16,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_32,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_64,
+ IMX7D_ADC_ANALOG_CLK_PRE_DIV_128,
+};
+
+enum imx7d_adc_average_num {
+ IMX7D_ADC_AVERAGE_NUM_4,
+ IMX7D_ADC_AVERAGE_NUM_8,
+ IMX7D_ADC_AVERAGE_NUM_16,
+ IMX7D_ADC_AVERAGE_NUM_32,
+};
+
+struct imx7d_adc_feature {
+ enum imx7d_adc_clk_pre_div clk_pre_div;
+ enum imx7d_adc_average_num avg_num;
+
+ u32 core_time_unit; /* impact the sample rate */
+
+ bool average_en;
+};
+
+struct imx7d_adc {
+ struct device *dev;
+ void __iomem *regs;
+ struct clk *clk;
+
+ u32 vref_uv;
+ u32 value;
+ u32 channel;
+ u32 pre_div_num;
+
+ struct regulator *vref;
+ struct imx7d_adc_feature adc_feature;
+
+ struct completion completion;
+};
+
+struct imx7d_adc_analogue_core_clk {
+ u32 pre_div;
+ u32 reg_config;
+};
+
+#define IMX7D_ADC_ANALOGUE_CLK_CONFIG(_pre_div, _reg_conf) { \
+ .pre_div = (_pre_div), \
+ .reg_config = (_reg_conf), \
+}
+
+static const struct imx7d_adc_analogue_core_clk imx7d_adc_analogue_clk[] = {
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(4, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_4),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(8, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_8),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(16, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_16),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(32, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_32),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(64, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_64),
+ IMX7D_ADC_ANALOGUE_CLK_CONFIG(128, IMX7D_REG_ADC_TIMER_UNIT_PRE_DIV_128),
+};
+
+#define IMX7D_ADC_CHAN(_idx) { \
+ .type = IIO_VOLTAGE, \
+ .indexed = 1, \
+ .channel = (_idx), \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+}
+
+static const struct iio_chan_spec imx7d_adc_iio_channels[] = {
+ IMX7D_ADC_CHAN(0),
+ IMX7D_ADC_CHAN(1),
+ IMX7D_ADC_CHAN(2),
+ IMX7D_ADC_CHAN(3),
+ IMX7D_ADC_CHAN(4),
+ IMX7D_ADC_CHAN(5),
+ IMX7D_ADC_CHAN(6),
+ IMX7D_ADC_CHAN(7),
+ IMX7D_ADC_CHAN(8),
+ IMX7D_ADC_CHAN(9),
+ IMX7D_ADC_CHAN(10),
+ IMX7D_ADC_CHAN(11),
+ IMX7D_ADC_CHAN(12),
+ IMX7D_ADC_CHAN(13),
+ IMX7D_ADC_CHAN(14),
+ IMX7D_ADC_CHAN(15),
+};
+
+static const u32 imx7d_adc_average_num[] = {
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_4,
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_8,
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_16,
+ IMX7D_REG_ADC_CH_CFG2_AVG_NUM_32,
+};
+
+static void imx7d_adc_feature_config(struct imx7d_adc *info)
+{
+ info->adc_feature.clk_pre_div = IMX7D_ADC_ANALOG_CLK_PRE_DIV_4;
+ info->adc_feature.avg_num = IMX7D_ADC_AVERAGE_NUM_32;
+ info->adc_feature.core_time_unit = 1;
+ info->adc_feature.average_en = true;
+}
+
+static void imx7d_adc_sample_rate_set(struct imx7d_adc *info)
+{
+ struct imx7d_adc_feature *adc_feature = &info->adc_feature;
+ struct imx7d_adc_analogue_core_clk adc_analogure_clk;
+ u32 i;
+ u32 tmp_cfg1;
+ u32 sample_rate = 0;
+
+ /*
+ * Before sample set, disable channel A,B,C,D. Here we
+ * clear the bit 31 of register REG_ADC_CH_A\B\C\D_CFG1.
+ */
+ for (i = 0; i < 4; i++) {
+ tmp_cfg1 = readl(info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
+ tmp_cfg1 &= ~IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN;
+ writel(tmp_cfg1, info->regs + i * IMX7D_EACH_CHANNEL_REG_OFFSET);
+ }
+
+ adc_analogure_clk = imx7d_adc_analogue_clk[adc_feature->clk_pre_div];
+ sample_rate |= adc_analogure_clk.reg_config;
+ info->pre_div_num = adc_analogure_clk.pre_div;
+
+ sample_rate |= adc_feature->core_time_unit;
+ writel(sample_rate, info->regs + IMX7D_REG_ADC_TIMER_UNIT);
+}
+
+static void imx7d_adc_hw_init(struct imx7d_adc *info)
+{
+ u32 cfg;
+
+ /* power up and enable adc analogue core */
+ cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
+ cfg &= ~(IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN | IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN);
+ cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_EN;
+ writel(cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
+
+ /* enable channel A,B,C,D interrupt */
+ writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, info->regs + IMX7D_REG_ADC_INT_SIG_EN);
+ writel(IMX7D_REG_ADC_INT_CHANNEL_INT_EN, info->regs + IMX7D_REG_ADC_INT_EN);
+
+ imx7d_adc_sample_rate_set(info);
+}
+
+static void imx7d_adc_channel_set(struct imx7d_adc *info)
+{
+ u32 cfg1 = 0;
+ u32 cfg2;
+ u32 channel;
+
+ channel = info->channel;
+
+ /* the channel choose single conversion, and enable average mode */
+ cfg1 |= (IMX7D_REG_ADC_CH_CFG1_CHANNEL_EN |
+ IMX7D_REG_ADC_CH_CFG1_CHANNEL_SINGLE);
+ if (info->adc_feature.average_en)
+ cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_AVG_EN;
+
+ /*
+ * physical channel 0 chose logical channel A
+ * physical channel 1 chose logical channel B
+ * physical channel 2 chose logical channel C
+ * physical channel 3 chose logical channel D
+ */
+ cfg1 |= IMX7D_REG_ADC_CH_CFG1_CHANNEL_SEL(channel);
+
+ /* read register REG_ADC_CH_A\B\C\D_CFG2, according to the channel chosen */
+ cfg2 = readl(info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
+
+ cfg2 |= imx7d_adc_average_num[info->adc_feature.avg_num];
+
+ /* write the register REG_ADC_CH_A\B\C\D_CFG2, according to the channel chosen */
+ writel(cfg2, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel + IMX7D_REG_ADC_CHANNEL_CFG2_BASE);
+ writel(cfg1, info->regs + IMX7D_EACH_CHANNEL_REG_OFFSET * channel);
+}
+
+static u32 imx7d_adc_get_sample_rate(struct imx7d_adc *info)
+{
+ /* input clock is always 24MHz */
+ u32 input_clk = 24000000;
+ u32 analogue_core_clk;
+ u32 core_time_unit = info->adc_feature.core_time_unit;
+ u32 tmp;
+
+ analogue_core_clk = input_clk / info->pre_div_num;
+ tmp = (core_time_unit + 1) * 6;
+
+ return analogue_core_clk / tmp;
+}
+
+static int imx7d_adc_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan,
+ int *val,
+ int *val2,
+ long mask)
+{
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ u32 channel;
+ long ret;
+
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ mutex_lock(&indio_dev->mlock);
+ reinit_completion(&info->completion);
+
+ channel = chan->channel & 0x03;
+ info->channel = channel;
+ imx7d_adc_channel_set(info);
+
+ ret = wait_for_completion_interruptible_timeout
+ (&info->completion, IMX7D_ADC_TIMEOUT);
+ if (ret == 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return -ETIMEDOUT;
+ }
+ if (ret < 0) {
+ mutex_unlock(&indio_dev->mlock);
+ return ret;
+ }
+
+ *val = info->value;
+ mutex_unlock(&indio_dev->mlock);
+ return IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ info->vref_uv = regulator_get_voltage(info->vref);
+ *val = info->vref_uv / 1000;
+ *val2 = 12;
+ return IIO_VAL_FRACTIONAL_LOG2;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *val = imx7d_adc_get_sample_rate(info);
+ return IIO_VAL_INT;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int imx7d_adc_read_data(struct imx7d_adc *info)
+{
+ u32 channel;
+ u32 value;
+
+ channel = info->channel & 0x03;
+
+ /*
+ * channel A and B conversion result share one register,
+ * bit[27~16] is the channel B conversion result,
+ * bit[11~0] is the channel A conversion result.
+ * channel C and D is the same.
+ */
+ if (channel < 2)
+ value = readl(info->regs + IMX7D_REG_ADC_CHA_B_CNV_RSLT);
+ else
+ value = readl(info->regs + IMX7D_REG_ADC_CHC_D_CNV_RSLT);
+ if (channel & 0x1) /* channel B or D */
+ value = (value >> 16) & 0xFFF;
+ else /* channel A or C */
+ value &= 0xFFF;
+
+ return value;
+}
+
+static irqreturn_t imx7d_adc_isr(int irq, void *dev_id)
+{
+ struct imx7d_adc *info = (struct imx7d_adc *)dev_id;
+ int status;
+
+ status = readl(info->regs + IMX7D_REG_ADC_INT_STATUS);
+ if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS) {
+ info->value = imx7d_adc_read_data(info);
+ complete(&info->completion);
+
+ /*
+ * The register IMX7D_REG_ADC_INT_STATUS can't clear
+ * itself after read operation, need software to write
+ * 0 to the related bit. Here we clear the channel A/B/C/D
+ * conversion finished flag.
+ */
+ status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_INT_STATUS;
+ writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
+ }
+
+ /*
+ * If the channel A/B/C/D conversion timeout, report it and clear these
+ * timeout flags.
+ */
+ if (status & IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT) {
+ pr_err("%s: ADC got conversion time out interrupt: 0x%08x\n",
+ dev_name(info->dev), status);
+ status &= ~IMX7D_REG_ADC_INT_STATUS_CHANNEL_CONV_TIME_OUT;
+ writel(status, info->regs + IMX7D_REG_ADC_INT_STATUS);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int imx7d_adc_reg_access(struct iio_dev *indio_dev,
+ unsigned reg, unsigned writeval,
+ unsigned *readval)
+{
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ if (!readval || reg % 4 || reg > IMX7D_REG_ADC_ADC_CFG)
+ return -EINVAL;
+
+ *readval = readl(info->regs + reg);
+
+ return 0;
+}
+
+static const struct iio_info imx7d_adc_iio_info = {
+ .driver_module = THIS_MODULE,
+ .read_raw = &imx7d_adc_read_raw,
+ .debugfs_reg_access = &imx7d_adc_reg_access,
+};
+
+static const struct of_device_id imx7d_adc_match[] = {
+ { .compatible = "fsl,imx7d-adc", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, imx7d_adc_match);
+
+static void imx7d_adc_power_down(struct imx7d_adc *info)
+{
+ u32 adc_cfg;
+
+ adc_cfg = readl(info->regs + IMX7D_REG_ADC_ADC_CFG);
+ adc_cfg |= IMX7D_REG_ADC_ADC_CFG_ADC_CLK_DOWN |
+ IMX7D_REG_ADC_ADC_CFG_ADC_POWER_DOWN;
+ adc_cfg &= ~IMX7D_REG_ADC_ADC_CFG_ADC_EN;
+ writel(adc_cfg, info->regs + IMX7D_REG_ADC_ADC_CFG);
+}
+
+static int imx7d_adc_probe(struct platform_device *pdev)
+{
+ struct imx7d_adc *info;
+ struct iio_dev *indio_dev;
+ struct resource *mem;
+ int irq;
+ int ret;
+
+ indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*info));
+ if (!indio_dev) {
+ dev_err(&pdev->dev, "Failed allocating iio device\n");
+ return -ENOMEM;
+ }
+
+ info = iio_priv(indio_dev);
+ info->dev = &pdev->dev;
+
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ info->regs = devm_ioremap_resource(&pdev->dev, mem);
+ if (IS_ERR(info->regs)) {
+ ret = PTR_ERR(info->regs);
+ dev_err(&pdev->dev, "Failed to remap adc memory, err = %d\n", ret);
+ return ret;
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq < 0) {
+ dev_err(&pdev->dev, "No irq resource?\n");
+ return irq;
+ }
+
+ info->clk = devm_clk_get(&pdev->dev, "adc");
+ if (IS_ERR(info->clk)) {
+ ret = PTR_ERR(info->clk);
+ dev_err(&pdev->dev, "Failed getting clock, err = %d\n", ret);
+ return ret;
+ }
+
+ info->vref = devm_regulator_get(&pdev->dev, "vref");
+ if (IS_ERR(info->vref)) {
+ ret = PTR_ERR(info->vref);
+ dev_err(&pdev->dev, "Failed getting reference voltage, err = %d\n", ret);
+ return ret;
+ }
+
+ ret = regulator_enable(info->vref);
+ if (ret) {
+ dev_err(&pdev->dev, "Can't enable adc reference top voltage, err = %d\n", ret);
+ return ret;
+ }
+
+ platform_set_drvdata(pdev, indio_dev);
+
+ init_completion(&info->completion);
+
+ indio_dev->name = dev_name(&pdev->dev);
+ indio_dev->dev.parent = &pdev->dev;
+ indio_dev->info = &imx7d_adc_iio_info;
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->channels = imx7d_adc_iio_channels;
+ indio_dev->num_channels = ARRAY_SIZE(imx7d_adc_iio_channels);
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(&pdev->dev,
+ "Could not prepare or enable the clock.\n");
+ goto error_adc_clk_enable;
+ }
+
+ ret = devm_request_irq(info->dev, irq,
+ imx7d_adc_isr, 0,
+ dev_name(&pdev->dev), info);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed requesting irq, irq = %d\n", irq);
+ goto error_iio_device_register;
+ }
+
+ imx7d_adc_feature_config(info);
+ imx7d_adc_hw_init(info);
+
+ ret = iio_device_register(indio_dev);
+ if (ret) {
+ imx7d_adc_power_down(info);
+ dev_err(&pdev->dev, "Couldn't register the device.\n");
+ goto error_iio_device_register;
+ }
+
+ return 0;
+
+error_iio_device_register:
+ clk_disable_unprepare(info->clk);
+error_adc_clk_enable:
+ regulator_disable(info->vref);
+
+ return ret;
+}
+
+static int imx7d_adc_remove(struct platform_device *pdev)
+{
+ struct iio_dev *indio_dev = platform_get_drvdata(pdev);
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ imx7d_adc_power_down(info);
+
+ iio_device_unregister(indio_dev);
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int __maybe_unused imx7d_adc_suspend(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct imx7d_adc *info = iio_priv(indio_dev);
+
+ imx7d_adc_power_down(info);
+
+ clk_disable_unprepare(info->clk);
+ regulator_disable(info->vref);
+
+ return 0;
+}
+
+static int __maybe_unused imx7d_adc_resume(struct device *dev)
+{
+ struct iio_dev *indio_dev = dev_get_drvdata(dev);
+ struct imx7d_adc *info = iio_priv(indio_dev);
+ int ret;
+
+ ret = regulator_enable(info->vref);
+ if (ret) {
+ dev_err(info->dev,
+ "Can't enable adc reference top voltage, err = %d\n", ret);
+ return ret;
+ }
+
+ ret = clk_prepare_enable(info->clk);
+ if (ret) {
+ dev_err(info->dev,
+ "Could not prepare or enable clock.\n");
+ regulator_disable(info->vref);
+ return ret;
+ }
+
+ imx7d_adc_hw_init(info);
+
+ return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(imx7d_adc_pm_ops, imx7d_adc_suspend, imx7d_adc_resume);
+
+static struct platform_driver imx7d_adc_driver = {
+ .probe = imx7d_adc_probe,
+ .remove = imx7d_adc_remove,
+ .driver = {
+ .name = "imx7d_adc",
+ .of_match_table = imx7d_adc_match,
+ .pm = &imx7d_adc_pm_ops,
+ },
+};
+
+module_platform_driver(imx7d_adc_driver);
+
+MODULE_AUTHOR("Haibo Chen <haibo.chen at freescale.com>");
+MODULE_DESCRIPTION("Freeacale IMX7D ADC driver");
+MODULE_LICENSE("GPL v2");
--
1.9.1
More information about the linux-arm-kernel
mailing list