[GIT PULL 2/4] Broadcom devicetree changes for v4.5
Florian Fainelli
f.fainelli at gmail.com
Mon Dec 7 15:57:27 PST 2015
The following changes since commit 8005c49d9aea74d382f474ce11afbbc7d7130bec:
Linux 4.4-rc1 (2015-11-15 17:00:27 -0800)
are available in the git repository at:
http://github.com/Broadcom/stblinux.git tags/arm-soc/for-4.5/devicetree
for you to fetch changes up to f6b889358a82c1f1a34bfcecfe8ebf709deb28ec:
ARM: dts: Enable MSI support for Broadcom Cygnus (2015-12-07 14:14:40 -0800)
----------------------------------------------------------------
This pull request contains the Broadcom ARM-based Device Tree changes for 4.5:
- Jon Mason enables the following for Broadcom Northstar Plus SoCs: PCI (using
iProc PCI), NAND flash controller (BRCMNAND), TWD Timer and Watchdog
(Cortex-A9), I2C (iProc), clock providers, does some Device Tree cleanups
(re-parenting, fixing register sizes and hierarchy)
- Jon Mason also adds support for some reference Broadcom Northstar reference
designs like the BCM5301X SVK reference boards, updates the existing binding
documentation to cover the Northstar chips: 4708, 4709 and 53012.
- Pramod Kumar adds the GPIO to pinctrl mapping for the Broadcom Northstar Plus
SoCs
- Yendapally Reddy Dhananjaya Reddy adds pinctrl Device Tree nodes for the
Broadcom Northstar Plus SoCs device tree nodes
- Ray Jui adds Cygnus PCIe PHY Device Tree nodes and enables MSI for the iProc
PCI controller on Cygnus platforms
- Kapil Hali adds SMP binding documentation and Device Tree nodes for the
Northstar Plus SoCs
- Florian Fainelli adds clock provider support for the Broadcom BCM63138 DSL
SoCs by utilizing the existing iProc ARM PLL controller, this includes a
stable topic branch from Stephen Boyd to be merged
- Rafal Milecki adds missing LEDs for the Netgear R8000 router
----------------------------------------------------------------
Florian Fainelli (3):
clk: iproc: Extend binding to cover BCM63138
clk: bcm: Add BCM63138 clock support
ARM: dts: BCM63xx: Add ARMPLL device tree nodes
Jon Mason (9):
ARM: dts: NSP: Add PCI support
ARM: dts: NSP: Add NAND Support to DT
ARM: dts: NSP: Add TWD Support to DT
dt-bindings: Add new SoCs to bcm4708 DT bindings
ARM: dts: bcm5301x: Add BCM SVK DT files
ARM: dts: NSP: Device Tree clean-ups
ARM: dts: NSP: Add I2C support to the DT
ARM: dts: enable clock support for BCM5301X
ARM: dts: enable clock support for Broadcom NSP
Kapil Hali (2):
dt-bindings: add SMP enable-method for Broadcom NSP
ARM: dts: Add SMP support for Broadcom NSP
Pramod Kumar (2):
dts: pinctrl: Add GPIO to Pinctrl pin mapping in DT
ARM: dts: Cygnus: define ngpios property in gpio controller's node
Rafał Miłecki (1):
ARM: BCM5301X: Add missing Netgear R8000 LEDs
Ray Jui (2):
ARM: dts: enable PCIe PHY support for Cygnus
ARM: dts: Enable MSI support for Broadcom Cygnus
Yendapally Reddy Dhananjaya Reddy (1):
ARM: dts: enable pinctrl for Broadcom NSP
.../devicetree/bindings/arm/bcm/brcm,bcm4708.txt | 7 +
.../bindings/arm/bcm/brcm,nsp-cpu-method.txt | 39 ++++
Documentation/devicetree/bindings/arm/cpus.txt | 1 +
.../bindings/clock/brcm,iproc-clocks.txt | 5 +
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/bcm-cygnus.dtsi | 101 ++++++++-
arch/arm/boot/dts/bcm-nsp.dtsi | 232 +++++++++++++++++++--
arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 30 +++
arch/arm/boot/dts/bcm5301x.dtsi | 92 ++++++--
arch/arm/boot/dts/bcm63138.dtsi | 36 +++-
arch/arm/boot/dts/bcm94708.dts | 56 +++++
arch/arm/boot/dts/bcm94709.dts | 56 +++++
arch/arm/boot/dts/bcm953012k.dts | 63 ++++++
arch/arm/boot/dts/bcm958625k.dts | 59 ++++++
drivers/clk/bcm/Kconfig | 10 +
drivers/clk/bcm/Makefile | 1 +
drivers/clk/bcm/clk-bcm63xx.c | 22 ++
17 files changed, 762 insertions(+), 53 deletions(-)
create mode 100644 Documentation/devicetree/bindings/arm/bcm/brcm,nsp-cpu-method.txt
create mode 100644 arch/arm/boot/dts/bcm94708.dts
create mode 100644 arch/arm/boot/dts/bcm94709.dts
create mode 100644 arch/arm/boot/dts/bcm953012k.dts
create mode 100644 drivers/clk/bcm/clk-bcm63xx.c
More information about the linux-arm-kernel
mailing list