[PATCH] ARM: mvebu: remove duplicated regulator definition in Armada 388 GP

[Gregory CLEMENT]

Hi Thomas,
 
 On ven., déc. 04 2015, Thomas Petazzoni <thomas.petazzoni at free-electrons.com> wrote:

> The Armada 388 GP Device Tree file describes two times a regulator
> named 'reg_usb2_1_vbus', with the exact same description. This has
> been wrong since Armada 388 GP support was introduced.
>
> Fixes: 928413bd859c0 ("ARM: mvebu: Add Armada 388 General Purpose Development Board support")
> Signed-off-by: Thomas Petazzoni <thomas.petazzoni at free-electrons.com>
> Cc: <stable at vger.kernel.org> # v4.0+

Applied on mvebu/dt

Thanks,

Gregory

> ---
>  arch/arm/boot/dts/armada-388-gp.dts | 10 ----------
>  1 file changed, 10 deletions(-)
>
> diff --git a/arch/arm/boot/dts/armada-388-gp.dts b/arch/arm/boot/dts/armada-388-gp.dts
> index a633be3..cd31602 100644
> --- a/arch/arm/boot/dts/armada-388-gp.dts
> +++ b/arch/arm/boot/dts/armada-388-gp.dts
> @@ -303,16 +303,6 @@
>  		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
>  	};
>  
> -	reg_usb2_1_vbus: v5-vbus1 {
> -		compatible = "regulator-fixed";
> -		regulator-name = "v5.0-vbus1";
> -		regulator-min-microvolt = <5000000>;
> -		regulator-max-microvolt = <5000000>;
> -		enable-active-high;
> -		regulator-always-on;
> -		gpio = <&expander0 4 GPIO_ACTIVE_HIGH>;
> -	};
> -
>  	reg_sata0: pwr-sata0 {
>  		compatible = "regulator-fixed";
>  		regulator-name = "pwr_en_sata0";
> -- 
> 2.6.3
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com