[PATCH 4/5] ARM: mvebu: Reenable DSA in mvebu_v5_defconfig

[Gregory CLEMENT]

Hi Andrew,
 
 On mer., déc. 02 2015, Andrew Lunn <andrew at lunn.ch> wrote:

> DSA now depends on switchdev. Enable it, and re-enable DSA and its
> drivers, which were removed when mvebu_v5_defconfig was regenerated.
>

Applied on mvebu/defconfig

Thanks,

Gregory

> Signed-Off-by: Andrew Lunn <andrew at lunn.ch>
> ---
>  arch/arm/configs/mvebu_v5_defconfig | 7 +++++++
>  1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/configs/mvebu_v5_defconfig b/arch/arm/configs/mvebu_v5_defconfig
> index aa9079c84024..d7c17864a1eb 100644
> --- a/arch/arm/configs/mvebu_v5_defconfig
> +++ b/arch/arm/configs/mvebu_v5_defconfig
> @@ -35,6 +35,8 @@ CONFIG_IP_PNP=y
>  CONFIG_IP_PNP_DHCP=y
>  CONFIG_IP_PNP_BOOTP=y
>  # CONFIG_IPV6 is not set
> +CONFIG_NET_DSA=y
> +CONFIG_NET_SWITCHDEV=y
>  CONFIG_NET_PKTGEN=m
>  CONFIG_CFG80211=y
>  CONFIG_MAC80211=y
> @@ -66,6 +68,11 @@ CONFIG_ATA=y
>  CONFIG_SATA_AHCI=y
>  CONFIG_SATA_MV=y
>  CONFIG_NETDEVICES=y
> +CONFIG_NET_DSA_MV88E6060=y
> +CONFIG_NET_DSA_MV88E6131=y
> +CONFIG_NET_DSA_MV88E6123_61_65=y
> +CONFIG_NET_DSA_MV88E6171=y
> +CONFIG_NET_DSA_MV88E6352=y
>  CONFIG_MV643XX_ETH=y
>  CONFIG_R8169=y
>  CONFIG_MARVELL_PHY=y
> -- 
> 2.6.2
>

-- 
Gregory Clement, Free Electrons
Kernel, drivers, real-time and embedded Linux
development, consulting, training and support.
http://free-electrons.com