[PATCH v2 6/7] usb: xhci: plat: add generic PHY support
Jisheng Zhang
jszhang at marvell.com
Mon Dec 7 04:49:23 PST 2015
Marvell BG4CT SoC needs two phy: one for usb2 and another for usb3. Add
the calls to retrieve generic PHY to xhci plat in order to support this.
Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
drivers/usb/host/xhci-plat.c | 87 ++++++++++++++++++++++++++++++++++++++------
1 file changed, 75 insertions(+), 12 deletions(-)
diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 62f02e5..bb972a6 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -16,6 +16,7 @@
#include <linux/dma-mapping.h>
#include <linux/module.h>
#include <linux/of.h>
+#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/slab.h>
#include <linux/usb/phy.h>
@@ -73,6 +74,37 @@ static int xhci_plat_start(struct usb_hcd *hcd)
return xhci_run(hcd);
}
+static int xhci_plat_phy_init(struct usb_hcd *hcd)
+{
+ int ret;
+
+ if (hcd->phy) {
+ ret = phy_init(hcd->phy);
+ if (ret)
+ return ret;
+
+ ret = phy_power_on(hcd->phy);
+ if (ret) {
+ phy_exit(hcd->phy);
+ return ret;
+ }
+ } else {
+ ret = usb_phy_init(hcd->usb_phy);
+ }
+
+ return ret;
+}
+
+static void xhci_plat_phy_exit(struct usb_hcd *hcd)
+{
+ if (hcd->phy) {
+ phy_power_off(hcd->phy);
+ phy_exit(hcd->phy);
+ } else {
+ usb_phy_shutdown(hcd->usb_phy);
+ }
+}
+
static int xhci_plat_probe(struct platform_device *pdev)
{
struct device_node *node = pdev->dev.of_node;
@@ -83,6 +115,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
struct usb_hcd *hcd;
struct clk *clk;
struct usb_phy *usb_phy;
+ struct phy *phy;
int ret;
int irq;
@@ -163,22 +196,44 @@ static int xhci_plat_probe(struct platform_device *pdev)
if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
xhci->shared_hcd->can_do_streams = 1;
+ hcd->phy = devm_phy_get(&pdev->dev, "usb2-phy");
+ if (IS_ERR(hcd->phy)) {
+ ret = PTR_ERR(hcd->phy);
+ if (ret == -EPROBE_DEFER)
+ goto put_usb3_hcd;
+ hcd->phy = NULL;
+ }
+
+ phy = devm_phy_get(&pdev->dev, "usb-phy");
+ if (IS_ERR(phy)) {
+ ret = PTR_ERR(phy);
+ if (ret == -EPROBE_DEFER)
+ goto put_usb3_hcd;
+ phy = NULL;
+ }
+
usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
if (IS_ERR(usb_phy)) {
ret = PTR_ERR(usb_phy);
if (ret == -EPROBE_DEFER)
goto put_usb3_hcd;
usb_phy = NULL;
- } else {
- ret = usb_phy_init(usb_phy);
- if (ret)
- goto put_usb3_hcd;
}
+
xhci->shared_hcd->usb_phy = usb_phy;
+ xhci->shared_hcd->phy = phy;
+
+ ret = xhci_plat_phy_init(hcd);
+ if (ret)
+ goto put_usb3_hcd;
+
+ ret = xhci_plat_phy_init(xhci->shared_hcd);
+ if (ret)
+ goto disable_usb2_phy;
ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
if (ret)
- goto disable_usb_phy;
+ goto disable_usb3_phy;
ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
if (ret)
@@ -190,8 +245,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
dealloc_usb2_hcd:
usb_remove_hcd(hcd);
-disable_usb_phy:
- usb_phy_shutdown(usb_phy);
+disable_usb3_phy:
+ xhci_plat_phy_exit(xhci->shared_hcd);
+
+disable_usb2_phy:
+ xhci_plat_phy_exit(hcd);
put_usb3_hcd:
usb_put_hcd(xhci->shared_hcd);
@@ -212,11 +270,11 @@ static int xhci_plat_remove(struct platform_device *dev)
struct clk *clk = xhci->clk;
usb_remove_hcd(xhci->shared_hcd);
- usb_phy_shutdown(xhci->shared_hcd->usb_phy);
-
- usb_remove_hcd(hcd);
+ xhci_plat_phy_exit(xhci->shared_hcd);
usb_put_hcd(xhci->shared_hcd);
+ usb_remove_hcd(hcd);
+ xhci_plat_phy_exit(hcd);
clk_disable_unprepare(clk);
usb_put_hcd(hcd);
@@ -242,7 +300,8 @@ static int xhci_plat_suspend(struct device *dev)
if (ret)
return ret;
- usb_phy_shutdown(xhci->shared_hcd->usb_phy);
+ xhci_plat_phy_exit(xhci->shared_hcd);
+ xhci_plat_phy_exit(hcd);
clk_disable_unprepare(xhci->clk);
return ret;
@@ -258,7 +317,11 @@ static int xhci_plat_resume(struct device *dev)
if (ret)
return ret;
- ret = usb_phy_init(xhci->shared_hcd->usb_phy);
+ ret = xhci_plat_phy_init(hcd);
+ if (ret)
+ return ret;
+
+ ret = xhci_plat_phy_init(xhci->shared_hcd);
if (ret)
return ret;
--
2.6.2
More information about the linux-arm-kernel
mailing list