[PATCH 6/7] usb: xhci: plat: add generic PHY support

Jisheng Zhang jszhang at marvell.com
Fri Dec 4 06:10:51 PST 2015


Marvell BG4CT SoC needs two phy: one for usb2 and another for usb3. Add
the calls to retrieve generic PHY to xhci plat in order to support this.

Signed-off-by: Jisheng Zhang <jszhang at marvell.com>
---
 drivers/usb/host/xhci-plat.c | 87 ++++++++++++++++++++++++++++++++++++++------
 1 file changed, 75 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c
index 62f02e5..bb972a6 100644
--- a/drivers/usb/host/xhci-plat.c
+++ b/drivers/usb/host/xhci-plat.c
@@ -16,6 +16,7 @@
 #include <linux/dma-mapping.h>
 #include <linux/module.h>
 #include <linux/of.h>
+#include <linux/phy/phy.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/usb/phy.h>
@@ -73,6 +74,37 @@ static int xhci_plat_start(struct usb_hcd *hcd)
 	return xhci_run(hcd);
 }
 
+static int xhci_plat_phy_init(struct usb_hcd *hcd)
+{
+	int ret;
+
+	if (hcd->phy) {
+		ret = phy_init(hcd->phy);
+		if (ret)
+			return ret;
+
+		ret = phy_power_on(hcd->phy);
+		if (ret) {
+			phy_exit(hcd->phy);
+			return ret;
+		}
+	} else {
+		ret = usb_phy_init(hcd->usb_phy);
+	}
+
+	return ret;
+}
+
+static void xhci_plat_phy_exit(struct usb_hcd *hcd)
+{
+	if (hcd->phy) {
+		phy_power_off(hcd->phy);
+		phy_exit(hcd->phy);
+	} else {
+		usb_phy_shutdown(hcd->usb_phy);
+	}
+}
+
 static int xhci_plat_probe(struct platform_device *pdev)
 {
 	struct device_node	*node = pdev->dev.of_node;
@@ -83,6 +115,7 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	struct usb_hcd		*hcd;
 	struct clk              *clk;
 	struct usb_phy		*usb_phy;
+	struct phy		*phy;
 	int			ret;
 	int			irq;
 
@@ -163,22 +196,44 @@ static int xhci_plat_probe(struct platform_device *pdev)
 	if (HCC_MAX_PSA(xhci->hcc_params) >= 4)
 		xhci->shared_hcd->can_do_streams = 1;
 
+	hcd->phy = devm_phy_get(&pdev->dev, "usb2-phy");
+	if (IS_ERR(hcd->phy)) {
+		ret = PTR_ERR(hcd->phy);
+		if (ret == -EPROBE_DEFER)
+			goto put_usb3_hcd;
+		hcd->phy = NULL;
+	}
+
+	phy = devm_phy_get(&pdev->dev, "usb-phy");
+	if (IS_ERR(phy)) {
+		ret = PTR_ERR(phy);
+		if (ret == -EPROBE_DEFER)
+			goto put_usb3_hcd;
+		phy = NULL;
+	}
+
 	usb_phy = devm_usb_get_phy_by_phandle(&pdev->dev, "usb-phy", 0);
 	if (IS_ERR(usb_phy)) {
 		ret = PTR_ERR(usb_phy);
 		if (ret == -EPROBE_DEFER)
 			goto put_usb3_hcd;
 		usb_phy = NULL;
-	} else {
-		ret = usb_phy_init(usb_phy);
-		if (ret)
-			goto put_usb3_hcd;
 	}
+
 	xhci->shared_hcd->usb_phy = usb_phy;
+	xhci->shared_hcd->phy = phy;
+
+	ret = xhci_plat_phy_init(hcd);
+	if (ret)
+		goto put_usb3_hcd;
+
+	ret = xhci_plat_phy_init(xhci->shared_hcd);
+	if (ret)
+		goto disable_usb2_phy;
 
 	ret = usb_add_hcd(hcd, irq, IRQF_SHARED);
 	if (ret)
-		goto disable_usb_phy;
+		goto disable_usb3_phy;
 
 	ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED);
 	if (ret)
@@ -190,8 +245,11 @@ static int xhci_plat_probe(struct platform_device *pdev)
 dealloc_usb2_hcd:
 	usb_remove_hcd(hcd);
 
-disable_usb_phy:
-	usb_phy_shutdown(usb_phy);
+disable_usb3_phy:
+	xhci_plat_phy_exit(xhci->shared_hcd);
+
+disable_usb2_phy:
+	xhci_plat_phy_exit(hcd);
 
 put_usb3_hcd:
 	usb_put_hcd(xhci->shared_hcd);
@@ -212,11 +270,11 @@ static int xhci_plat_remove(struct platform_device *dev)
 	struct clk *clk = xhci->clk;
 
 	usb_remove_hcd(xhci->shared_hcd);
-	usb_phy_shutdown(xhci->shared_hcd->usb_phy);
-
-	usb_remove_hcd(hcd);
+	xhci_plat_phy_exit(xhci->shared_hcd);
 	usb_put_hcd(xhci->shared_hcd);
 
+	usb_remove_hcd(hcd);
+	xhci_plat_phy_exit(hcd);
 	clk_disable_unprepare(clk);
 	usb_put_hcd(hcd);
 
@@ -242,7 +300,8 @@ static int xhci_plat_suspend(struct device *dev)
 	if (ret)
 		return ret;
 
-	usb_phy_shutdown(xhci->shared_hcd->usb_phy);
+	xhci_plat_phy_exit(xhci->shared_hcd);
+	xhci_plat_phy_exit(hcd);
 	clk_disable_unprepare(xhci->clk);
 
 	return ret;
@@ -258,7 +317,11 @@ static int xhci_plat_resume(struct device *dev)
 	if (ret)
 		return ret;
 
-	ret = usb_phy_init(xhci->shared_hcd->usb_phy);
+	ret = xhci_plat_phy_init(hcd);
+	if (ret)
+		return ret;
+
+	ret = xhci_plat_phy_init(xhci->shared_hcd);
 	if (ret)
 		return ret;
 
-- 
2.6.2




More information about the linux-arm-kernel mailing list