[PATCH 2/7] ARM: dts: Update edma bindings on dm814x to use edma_xbar

[Peter Ujfalusi]

On 12/04/2015 03:25 AM, Tony Lindgren wrote:
> The edma is the same as on am33xx, except it has four tptc
> instances. And we need the edma_xbar for at least mmc3, so
> let's use the edma_xbar and the new binding as suggested by
> Peter Ujfalusi <peter.ujfalusi at ti.com>.
> 
> Cc: Peter Ujfalusi <peter.ujfalusi at ti.com>
> Signed-off-by: Tony Lindgren <tony at atomide.com>

Reviewed-by: Peter Ujfalusi <peter.ujfalusi at ti.com>

> ---
>  arch/arm/boot/dts/dm814x.dtsi | 68 ++++++++++++++++++++++++++++++++++++-------
>  1 file changed, 58 insertions(+), 10 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/dm814x.dtsi b/arch/arm/boot/dts/dm814x.dtsi
> index ca92346..9d81980e 100644
> --- a/arch/arm/boot/dts/dm814x.dtsi
> +++ b/arch/arm/boot/dts/dm814x.dtsi
> @@ -126,8 +126,8 @@
>  				interrupts = <65>;
>  				ti,spi-num-cs = <4>;
>  				ti,hwmods = "mcspi1";
> -				dmas = <&edma 16 &edma 17
> -					&edma 18 &edma 19>;
> +				dmas = <&edma 16 0 &edma 17 0
> +					&edma 18 0 &edma 19 0>;
>  				dma-names = "tx0", "rx0", "tx1", "rx1";
>  			};
>  
> @@ -145,7 +145,7 @@
>  				reg = <0x20000 0x2000>;
>  				clock-frequency = <48000000>;
>  				interrupts = <72>;
> -				dmas = <&edma 26 &edma 27>;
> +				dmas = <&edma 26 0 &edma 27 0>;
>  				dma-names = "tx", "rx";
>  			};
>  
> @@ -155,7 +155,7 @@
>  				reg = <0x22000 0x2000>;
>  				clock-frequency = <48000000>;
>  				interrupts = <73>;
> -				dmas = <&edma 28 &edma 29>;
> +				dmas = <&edma 28 0 &edma 29 0>;
>  				dma-names = "tx", "rx";
>  			};
>  
> @@ -165,7 +165,7 @@
>  				reg = <0x24000 0x2000>;
>  				clock-frequency = <48000000>;
>  				interrupts = <74>;
> -				dmas = <&edma 30 &edma 31>;
> +				dmas = <&edma 30 0 &edma 31 0>;
>  				dma-names = "tx", "rx";
>  			};
>  
> @@ -205,6 +205,14 @@
>  					};
>  				};
>  
> +				edma_xbar: dma-router at f90 {
> +					compatible = "ti,am335x-edma-crossbar";
> +					reg = <0xf90 0x40>;
> +					#dma-cells = <3>;
> +					dma-requests = <32>;
> +					dma-masters = <&edma>;
> +				};
> +
>  				/*
>  				 * Note that silicon revision 2.1 and older
>  				 * require input enabled (bit 18 set) for all
> @@ -272,12 +280,52 @@
>  		};
>  
>  		edma: edma at 49000000 {
> -			compatible = "ti,edma3";
> -			ti,hwmods = "tpcc", "tptc0", "tptc1", "tptc2";
> -			reg =	<0x49000000 0x10000>,
> -				<0x44e10f90 0x40>;
> +			compatible = "ti,edma3-tpcc";
> +			ti,hwmods = "tpcc";
> +			reg =	<0x49000000 0x10000>;
> +			reg-names = "edma3_cc";
>  			interrupts = <12 13 14>;
> -			#dma-cells = <1>;
> +			interrupt-names = "edma3_ccint", "emda3_mperr",
> +					  "edma3_ccerrint";
> +			dma-requests = <64>;
> +			#dma-cells = <2>;
> +
> +			ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 5>,
> +				   <&edma_tptc2 3>, <&edma_tptc3 0>;
> +
> +			ti,edma-memcpy-channels = /bits/ 16 <20 21>;
> +		};
> +
> +		edma_tptc0: tptc at 49800000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc0";
> +			reg =	<0x49800000 0x100000>;
> +			interrupts = <112>;
> +			interrupt-names = "edma3_tcerrint";
> +		};
> +
> +		edma_tptc1: tptc at 49900000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc1";
> +			reg =	<0x49900000 0x100000>;
> +			interrupts = <113>;
> +			interrupt-names = "edma3_tcerrint";
> +		};
> +
> +		edma_tptc2: tptc at 49a00000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc2";
> +			reg =	<0x49a00000 0x100000>;
> +			interrupts = <114>;
> +			interrupt-names = "edma3_tcerrint";
> +		};
> +
> +		edma_tptc3: tptc at 49b00000 {
> +			compatible = "ti,edma3-tptc";
> +			ti,hwmods = "tptc3";
> +			reg =	<0x49b00000 0x100000>;
> +			interrupts = <115>;
> +			interrupt-names = "edma3_tcerrint";
>  		};
>  
>  		/* See TRM "Table 1-318. L4HS Instance Summary" */
> 


-- 
Péter