[PATCH v5 00/21] KVM: ARM64: Add guest PMU support
Shannon Zhao
zhaoshenglong at huawei.com
Wed Dec 2 22:11:10 PST 2015
From: Shannon Zhao <shannon.zhao at linaro.org>
This patchset adds guest PMU support for KVM on ARM64. It takes
trap-and-emulate approach. When guest wants to monitor one event, it
will be trapped by KVM and KVM will call perf_event API to create a perf
event and call relevant perf_event APIs to get the count value of event.
Use perf to test this patchset in guest. When using "perf list", it
shows the list of the hardware events and hardware cache events perf
supports. Then use "perf stat -e EVENT" to monitor some event. For
example, use "perf stat -e cycles" to count cpu cycles and
"perf stat -e cache-misses" to count cache misses.
Below are the outputs of "perf stat -r 5 sleep 5" when running in host
and guest.
Host:
Performance counter stats for 'sleep 5' (5 runs):
0.510276 task-clock (msec) # 0.000 CPUs utilized ( +- 1.57% )
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
49 page-faults # 0.096 M/sec ( +- 0.77% )
1064117 cycles # 2.085 GHz ( +- 1.56% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
529051 instructions # 0.50 insns per cycle ( +- 0.55% )
<not supported> branches
9894 branch-misses # 19.390 M/sec ( +- 1.70% )
5.000853900 seconds time elapsed ( +- 0.00% )
Guest:
Performance counter stats for 'sleep 5' (5 runs):
0.642456 task-clock (msec) # 0.000 CPUs utilized ( +- 1.81% )
1 context-switches # 0.002 M/sec
0 cpu-migrations # 0.000 K/sec
49 page-faults # 0.076 M/sec ( +- 1.64% )
1322717 cycles # 2.059 GHz ( +- 1.88% )
<not supported> stalled-cycles-frontend
<not supported> stalled-cycles-backend
640944 instructions # 0.48 insns per cycle ( +- 1.10% )
<not supported> branches
10665 branch-misses # 16.600 M/sec ( +- 2.23% )
5.001181452 seconds time elapsed ( +- 0.00% )
Have a cycle counter read test like below in guest and host:
static void test(void)
{
unsigned long count, count1, count2;
count1 = read_cycles();
count++;
count2 = read_cycles();
}
Host:
count1: 3046186213
count2: 3046186347
delta: 134
Guest:
count1: 5645797121
count2: 5645797270
delta: 149
The gap between guest and host is very small. One reason for this I
think is that it doesn't count the cycles in EL2 and host since we add
exclude_hv = 1. So the cycles spent to store/restore registers which
happens at EL2 are not included.
This patchset can be fetched from [1] and the relevant QEMU version for
test can be fetched from [2].
The results of 'perf test' can be found from [3][4].
The results of perf_event_tests test suite can be found from [5][6].
Also, I have tested "perf top" in two VMs and host at the same time. It
works well.
Thanks,
Shannon
[1] https://git.linaro.org/people/shannon.zhao/linux-mainline.git KVM_ARM64_PMU_v5
[2] https://git.linaro.org/people/shannon.zhao/qemu.git virtual_PMU
[3] http://people.linaro.org/~shannon.zhao/PMU/perf-test-host.txt
[4] http://people.linaro.org/~shannon.zhao/PMU/perf-test-guest.txt
[5] http://people.linaro.org/~shannon.zhao/PMU/perf_event_tests-host.txt
[6] http://people.linaro.org/~shannon.zhao/PMU/perf_event_tests-guest.txt
Changes since v4:
* Rebase on new linux kernel mainline
* Drop the reset handler of CP15 registers
* Fix a compile failure on arch ARM due to lack of asm/pmu.h
* Refactor the interrupt injecting flow according to Marc's suggestion
* Check the value of PMSELR register
* Calculate the attr.disabled according to PMCR.E and PMCNTENSET/CLR
* Fix some coding style
* Document the vPMU irq range
Changes since v3:
* Rebase on new linux kernel mainline
* Use ARMV8_MAX_COUNTERS instead of 32
* Reset PMCR.E to zero.
* Trigger overflow for software increment.
* Optimize PMU interrupt inject logic.
* Add handler for E,C,P bits of PMCR
* Fix the overflow bug found by perf_event_tests
* Run 'perf test', 'perf top' and perf_event_tests test suite
* Add exclude_hv = 1 configuration to not count in EL2
Changes since v2:
* Directly use perf raw event type to create perf_event in KVM
* Add a helper vcpu_sysreg_write
* remove unrelated header file
Changes since v1:
* Use switch...case for registers access handler instead of adding
alone handler for each register
* Try to use the sys_regs to store the register value instead of adding
new variables in struct kvm_pmc
* Fix the handle of cp15 regs
* Create a new kvm device vPMU, then userspace could choose whether to
create PMU
* Fix the handle of PMU overflow interrupt
Shannon Zhao (21):
ARM64: Move PMU register related defines to asm/pmu.h
KVM: ARM64: Define PMU data structure for each vcpu
KVM: ARM64: Add offset defines for PMU registers
KVM: ARM64: Add reset and access handlers for PMCR_EL0 register
KVM: ARM64: Add reset and access handlers for PMSELR register
KVM: ARM64: Add reset and access handlers for PMCEID0 and PMCEID1
register
KVM: ARM64: PMU: Add perf event map and introduce perf event creating
function
KVM: ARM64: Add reset and access handlers for PMXEVTYPER register
KVM: ARM64: Add reset and access handlers for PMXEVCNTR register
KVM: ARM64: Add reset and access handlers for PMCCNTR register
KVM: ARM64: Add reset and access handlers for PMCNTENSET and
PMCNTENCLR register
KVM: ARM64: Add reset and access handlers for PMINTENSET and
PMINTENCLR register
KVM: ARM64: Add reset and access handlers for PMOVSSET and PMOVSCLR
register
KVM: ARM64: Add reset and access handlers for PMUSERENR register
KVM: ARM64: Add reset and access handlers for PMSWINC register
KVM: ARM64: Add access handlers for PMEVCNTRn and PMEVTYPERn register
KVM: ARM64: Add helper to handle PMCR register bits
KVM: ARM64: Add PMU overflow interrupt routing
KVM: ARM64: Reset PMU state when resetting vcpu
KVM: ARM64: Free perf event of PMU when destroying vcpu
KVM: ARM64: Add a new kvm ARM PMU device
Documentation/virtual/kvm/devices/arm-pmu.txt | 16 +
arch/arm/kvm/arm.c | 3 +
arch/arm64/include/asm/kvm_asm.h | 55 ++-
arch/arm64/include/asm/kvm_host.h | 2 +
arch/arm64/include/asm/pmu.h | 66 +++
arch/arm64/include/uapi/asm/kvm.h | 3 +
arch/arm64/kernel/perf_event.c | 36 +-
arch/arm64/kvm/Kconfig | 8 +
arch/arm64/kvm/Makefile | 1 +
arch/arm64/kvm/reset.c | 3 +
arch/arm64/kvm/sys_regs.c | 559 ++++++++++++++++++++++++--
include/kvm/arm_pmu.h | 72 ++++
include/linux/kvm_host.h | 1 +
include/uapi/linux/kvm.h | 2 +
virt/kvm/arm/pmu.c | 525 ++++++++++++++++++++++++
virt/kvm/kvm_main.c | 4 +
16 files changed, 1288 insertions(+), 68 deletions(-)
create mode 100644 Documentation/virtual/kvm/devices/arm-pmu.txt
create mode 100644 arch/arm64/include/asm/pmu.h
create mode 100644 include/kvm/arm_pmu.h
create mode 100644 virt/kvm/arm/pmu.c
--
2.0.4
More information about the linux-arm-kernel
mailing list