[PATCH 02/12] clk: samsung: exynos5420: add cpu clock configuration data and instantiate cpu clock

[Krzysztof Kozlowski]

On 03.12.2015 06:19, Ben Gamari wrote:
> From: Thomas Abraham <thomas.ab at samsung.com>
> 
> With the addition of the new Samsung specific cpu-clock type, the
> arm clock can be represented as a cpu-clock type. Add the CPU clock
> configuration data and instantiate the CPU clock type for Exynos5420.
> 
> Changes by Bartlomiej:
> - split Exynos5420 support from the original patches
> - moved E5420_[EGL,KFC]_DIV0() macros to clk-exynos5420.c
> 
> Changes by Ben Gamari:
> - Rebased

If only rebasing then you should retain the Lukasz's review tag. He
doesn't have to review it again, right? :)

> 
> Cc: Tomasz Figa <tomasz.figa at gmail.com>
> Cc: Mike Turquette <mturquette at linaro.org>
> Cc: Javier Martinez Canillas <javier at osg.samsung.com>
> Signed-off-by: Thomas Abraham <thomas.ab at samsung.com>
> Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie at samsung.com>
> Signed-off-by: Ben Gamari <ben at smart-cactus.org>
> ---
>  drivers/clk/samsung/clk-exynos5420.c   | 58 ++++++++++++++++++++++++++++++++--
>  include/dt-bindings/clock/exynos5420.h |  2 ++
>  2 files changed, 58 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 389af3c..2288052 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -18,6 +18,7 @@
>  #include <linux/syscore_ops.h>
>  
>  #include "clk.h"
> +#include "clk-cpu.h"
>  
>  #define APLL_LOCK		0x0
>  #define APLL_CON0		0x100
> @@ -616,9 +617,11 @@ static struct samsung_mux_clock exynos5x_mux_clks[] __initdata = {
>  	MUX(0, "mout_mspll_kfc", mout_mspll_cpu_p, SRC_TOP7, 8, 2),
>  	MUX(0, "mout_mspll_cpu", mout_mspll_cpu_p, SRC_TOP7, 12, 2),
>  
> -	MUX(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1),
> +	MUX_F(0, "mout_apll", mout_apll_p, SRC_CPU, 0, 1,
> +	      CLK_SET_RATE_PARENT, 0),
>  	MUX(0, "mout_cpu", mout_cpu_p, SRC_CPU, 16, 1),
> -	MUX(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1),
> +	MUX_F(0, "mout_kpll", mout_kpll_p, SRC_KFC, 0, 1,
> +	      CLK_SET_RATE_PARENT, 0),
>  	MUX(0, "mout_kfc", mout_kfc_p, SRC_KFC, 16, 1),
>  
>  	MUX(0, "mout_aclk200", mout_group1_p, SRC_TOP0, 8, 2),
> @@ -1246,6 +1249,50 @@ static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
>  		KPLL_CON0, NULL),
>  };
>  
> +#define E5420_EGL_DIV0(apll, pclk_dbg, atb, cpud)			\
> +		((((apll) << 24) | ((pclk_dbg) << 20) | ((atb) << 16) |	\
> +		 ((cpud) << 4)))
> +
> +static const struct exynos_cpuclk_cfg_data exynos5420_eglclk_d[] __initconst = {
> +	{ 1800000, E5420_EGL_DIV0(3, 7, 7, 4), },
> +	{ 1700000, E5420_EGL_DIV0(3, 7, 7, 3), },
> +	{ 1600000, E5420_EGL_DIV0(3, 7, 7, 3), },
> +	{ 1500000, E5420_EGL_DIV0(3, 7, 7, 3), },
> +	{ 1400000, E5420_EGL_DIV0(3, 7, 7, 3), },
> +	{ 1300000, E5420_EGL_DIV0(3, 7, 7, 2), },
> +	{ 1200000, E5420_EGL_DIV0(3, 7, 7, 2), },
> +	{ 1100000, E5420_EGL_DIV0(3, 7, 7, 2), },
> +	{ 1000000, E5420_EGL_DIV0(3, 6, 6, 2), },
> +	{  900000, E5420_EGL_DIV0(3, 6, 6, 2), },
> +	{  800000, E5420_EGL_DIV0(3, 5, 5, 2), },
> +	{  700000, E5420_EGL_DIV0(3, 5, 5, 2), },
> +	{  600000, E5420_EGL_DIV0(3, 4, 4, 2), },
> +	{  500000, E5420_EGL_DIV0(3, 3, 3, 2), },
> +	{  400000, E5420_EGL_DIV0(3, 3, 3, 2), },
> +	{  300000, E5420_EGL_DIV0(3, 3, 3, 2), },
> +	{  200000, E5420_EGL_DIV0(3, 3, 3, 2), },
> +	{  0 },

The vendor code (Galaxy S5 with Exynos5422) sets pclk_dbg divider to 7.
In the same time APLL divider is only 1.

For the ACLK divider (of KFC below) the vendor sets 3, not 2.

The values also don't match the Exynos5420 from Note 3.

The Exynos5800 apparently has values more similar to 5422.

The question is: for which exact model this is? We can of course choose
the safest values here but probably these would be with the highest
dividers?

Best regards,
Krzyztof


> +};
> +
> +#define E5420_KFC_DIV(kpll, pclk, aclk)					\
> +		((((kpll) << 24) | ((pclk) << 20) | ((aclk) << 4)))
> +
> +static const struct exynos_cpuclk_cfg_data exynos5420_kfcclk_d[] __initconst = {
> +	{ 1300000, E5420_KFC_DIV(3, 5, 2), },
> +	{ 1200000, E5420_KFC_DIV(3, 5, 2), },
> +	{ 1100000, E5420_KFC_DIV(3, 5, 2), },
> +	{ 1000000, E5420_KFC_DIV(3, 5, 2), },
> +	{  900000, E5420_KFC_DIV(3, 5, 2), },
> +	{  800000, E5420_KFC_DIV(3, 5, 2), },
> +	{  700000, E5420_KFC_DIV(3, 4, 2), },
> +	{  600000, E5420_KFC_DIV(3, 4, 2), },
> +	{  500000, E5420_KFC_DIV(3, 4, 2), },
> +	{  400000, E5420_KFC_DIV(3, 3, 2), },
> +	{  300000, E5420_KFC_DIV(3, 3, 2), },
> +	{  200000, E5420_KFC_DIV(3, 3, 2), },
> +	{  0 },
> +};
> +
>  static const struct of_device_id ext_clk_match[] __initconst = {
>  	{ .compatible = "samsung,exynos5420-oscclk", .data = (void *)0, },
>  	{ },
> @@ -1310,6 +1357,13 @@ static void __init exynos5x_clk_init(struct device_node *np,
>  				ARRAY_SIZE(exynos5800_gate_clks));
>  	}
>  
> +	exynos_register_cpu_clock(ctx, CLK_ARM_CLK, "armclk",
> +		mout_cpu_p[0], mout_cpu_p[1], 0x200,
> +		exynos5420_eglclk_d, ARRAY_SIZE(exynos5420_eglclk_d), 0);
> +	exynos_register_cpu_clock(ctx, CLK_KFC_CLK, "kfcclk",
> +		mout_kfc_p[0], mout_kfc_p[1], 0x28200,
> +		exynos5420_kfcclk_d, ARRAY_SIZE(exynos5420_kfcclk_d), 0);
> +
>  	exynos5420_clk_sleep_init();
>  
>  	samsung_clk_of_add_provider(np, ctx);
> diff --git a/include/dt-bindings/clock/exynos5420.h b/include/dt-bindings/clock/exynos5420.h
> index 99da0d1..dde9664 100644
> --- a/include/dt-bindings/clock/exynos5420.h
> +++ b/include/dt-bindings/clock/exynos5420.h
> @@ -25,6 +25,8 @@
>  #define CLK_FOUT_MPLL		10
>  #define CLK_FOUT_BPLL		11
>  #define CLK_FOUT_KPLL		12
> +#define CLK_ARM_CLK		13
> +#define CLK_KFC_CLK		14
>  
>  /* gate for special clocks (sclk) */
>  #define CLK_SCLK_UART0		128
>