[PATCH v3 3/7] ARM: dts: imx: Add Advantech BA-16 Qseven module
Akshay Bhat
akshay.bhat at timesys.com
Wed Dec 2 10:40:36 PST 2015
On 11/16/2015 06:16 AM, Lucas Stach wrote:
> Hi Akshay,
>
> another comment below and in the next patch, sorry for not spotting this
> in the last round.
>
> Regards,
> Lucas
>
Thanks for the continued feedback :)
> Am Dienstag, den 10.11.2015, 13:00 -0500 schrieb Akshay Bhat:
>> From: Justin Waters <justin.waters at timesys.com>
>>
>> Add support for Advantech BA-16 module based on iMX6D processor
>>
>> http://www2.advantech.com/products/medical_computing_system/dms-ba16/mod_64aa1566-169c-483d-97c8-c2c22c163fc3.aspx
>> Signed-off-by: Akshay Bhat <akshay.bhat at timesys.com>
>> ---
>> arch/arm/boot/dts/imx6q-ba16.dtsi | 584 ++++++++++++++++++++++++++++++++++++++
>> 1 file changed, 584 insertions(+)
>> create mode 100644 arch/arm/boot/dts/imx6q-ba16.dtsi
>>
>> diff --git a/arch/arm/boot/dts/imx6q-ba16.dtsi b/arch/arm/boot/dts/imx6q-ba16.dtsi
>> new file mode 100644
>> index 0000000..d0c4568
>> --- /dev/null
>> +++ b/arch/arm/boot/dts/imx6q-ba16.dtsi
>> @@ -0,0 +1,584 @@
>> +/*
>> + * Support for imx6 based Advantech DMS-BA16 Qseven module
>> + *
>> + * Copyright 2015 Timesys Corporation.
>> + * Copyright 2015 General Electric Company
>> + *
>> + * The code contained herein is licensed under the GNU General Public
>> + * License. You may obtain a copy of the GNU General Public License
>> + * Version 2 or later at the following locations:
>> + *
>> + * http://www.opensource.org/licenses/gpl-license.html
>> + * http://www.gnu.org/copyleft/gpl.html
>> + */
>> +
>> +#include "imx6q.dtsi"
>> +#include <dt-bindings/gpio/gpio.h>
>> +
>> +/ {
>> + memory {
>> + reg = <0x10000000 0x40000000>;
>> + };
>> +
>> + clocks {
>> + clk24m: clk24m {
>> + compatible = "fixed-clock";
>> + #clock-cells = <0>;
>> + clock-frequency = <24000000>;
>> + };
>> + };
>> +
>> + regulators {
>> + compatible = "simple-bus";
>> +
>
> The use of a simple-bus, while giving some structure to the DT is
> considered bad style as it doesn't reflect any real hardware.
>
> Please remove this, the regulators should be located the same DT level
> as the backlight and other board components.
Thanks for the explanation. Fixed in v4 version of patch:
http://lists.infradead.org/pipermail/linux-arm-kernel/2015-December/390373.html
>
>> + reg_usb_otg_vbus: regulator at 1 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "usb_otg_vbus";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + };
>> +
>> + reg_usb_h1_vbus: regulator at 2 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "usb_h1_vbus";
>> + regulator-min-microvolt = <5000000>;
>> + regulator-max-microvolt = <5000000>;
>> + };
>> +
>> + reg_1p8v: regulator at 3 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "1P8V";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + };
>> +
>> + reg_3p3v: regulator at 4 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "3P3V";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-always-on;
>> + };
>> +
>> + lvds_ppen: regulator at 5 {
>> + compatible = "regulator-fixed";
>> + regulator-name = "lvds_ppen";
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-boot-on;
>> + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>;
>> + enable-active-high;
>> + };
>> + };
>> +
>> + backlight {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_display>;
>> + compatible = "pwm-backlight";
>> + pwms = <&pwm1 0 5000000>;
>> + brightness-levels = < 0 1 2 3 4 5 6 7 8 9
>> + 10 11 12 13 14 15 16 17 18 19
>> + 20 21 22 23 24 25 26 27 28 29
>> + 30 31 32 33 34 35 36 37 38 39
>> + 40 41 42 43 44 45 46 47 48 49
>> + 50 51 52 53 54 55 56 57 58 59
>> + 60 61 62 63 64 65 66 67 68 69
>> + 70 71 72 73 74 75 76 77 78 79
>> + 80 81 82 83 84 85 86 87 88 89
>> + 90 91 92 93 94 95 96 97 98 99
>> + 100 101 102 103 104 105 106 107 108 109
>> + 110 111 112 113 114 115 116 117 118 119
>> + 120 121 122 123 124 125 126 127 128 129
>> + 130 131 132 133 134 135 136 137 138 139
>> + 140 141 142 143 144 145 146 147 148 149
>> + 150 151 152 153 154 155 156 157 158 159
>> + 160 161 162 163 164 165 166 167 168 169
>> + 170 171 172 173 174 175 176 177 178 179
>> + 180 181 182 183 184 185 186 187 188 189
>> + 190 191 192 193 194 195 196 197 198 199
>> + 200 201 202 203 204 205 206 207 208 209
>> + 210 211 212 213 214 215 216 217 218 219
>> + 220 221 222 223 224 225 226 227 228 229
>> + 230 231 232 233 234 235 236 237 238 239
>> + 240 241 242 243 244 245 246 247 248 249
>> + 250 251 252 253 254 255>;
>> + default-brightness-level = <255>;
>> + enable-gpios = <&gpio4 15 GPIO_ACTIVE_HIGH>;
>> + power-supply = <&lvds_ppen>;
>> + };
>> +};
>> +
>> +&audmux {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_audmux>;
>> + status = "okay";
>> +};
>> +
>> +&ecspi1 {
>> + fsl,spi-num-chipselects = <1>;
>> + cs-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_ecspi1>;
>> + status = "okay";
>> +
>> + flash: n25q032 at 0 {
>> + #address-cells = <1>;
>> + #size-cells = <1>;
>> + compatible = "jedec,spi-nor";
>> + spi-max-frequency = <20000000>;
>> + reg = <0>;
>> + partition at 0 {
>> + label = "U-Boot";
>> + reg = <0x0 0xC0000>;
>> + };
>> + partition at C0000 {
>> + label = "env";
>> + reg = <0xC0000 0x10000>;
>> + };
>> + partition at D0000 {
>> + label = "spare";
>> + reg = <0xD0000 0x130000>;
>> + };
>> + };
>> +};
>> +
>> +&fec {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_enet>;
>> + phy-mode = "rgmii";
>> + status = "okay";
>> +};
>> +
>> +&hdmi {
>> + ddc-i2c-bus = <&i2c2>;
>> + status = "okay";
>> +};
>> +
>> +&i2c1 {
>> + clock-frequency = <100000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c1>;
>> + status = "okay";
>> +};
>> +
>> +&i2c2 {
>> + clock-frequency = <100000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c2>;
>> + status = "okay";
>> +};
>> +
>> +&i2c3 {
>> + clock-frequency = <100000>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_i2c3>;
>> + status = "okay";
>> +
>> + pmic at 58 {
>> + compatible = "dlg,da9063";
>> + reg = <0x58>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pmic>;
>> + interrupt-parent = <&gpio7>;
>> + interrupts = <13 IRQ_TYPE_LEVEL_LOW>;
>> +
>> + regulators {
>> + vdd_bcore1: bcore1 {
>> + regulator-min-microvolt = <1420000>;
>> + regulator-max-microvolt = <1420000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + vdd_bcore2: bcore2 {
>> + regulator-min-microvolt = <1420000>;
>> + regulator-max-microvolt = <1420000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + vdd_bpro: bpro {
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + vdd_bmem: bmem {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + vdd_bio: bio {
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + vdd_bperi: bperi {
>> + regulator-min-microvolt = <3300000>;
>> + regulator-max-microvolt = <3300000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> +
>> + vdd_ldo1: ldo1 {
>> + regulator-min-microvolt = <600000>;
>> + regulator-max-microvolt = <1860000>;
>> + };
>> +
>> + vdd_ldo2: ldo2 {
>> + regulator-min-microvolt = <600000>;
>> + regulator-max-microvolt = <1860000>;
>> + };
>> +
>> + vdd_ldo3: ldo3 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3440000>;
>> + };
>> +
>> + vdd_ldo4: ldo4 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3440000>;
>> + };
>> +
>> + vdd_ldo5: ldo5 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> +
>> + vdd_ldo6: ldo6 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> +
>> + vdd_ldo7: ldo7 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> +
>> + vdd_ldo8: ldo8 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> +
>> + vdd_ldo9: ldo9 {
>> + regulator-min-microvolt = <950000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> +
>> + vdd_ldo10: ldo10 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3600000>;
>> + };
>> +
>> + vdd_ldo11: ldo11 {
>> + regulator-min-microvolt = <900000>;
>> + regulator-max-microvolt = <3600000>;
>> + regulator-always-on;
>> + regulator-boot-on;
>> + };
>> + };
>> + };
>> +};
>> +
>> +&iomuxc {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_hog>;
>> +
>> + imx6q-ba16 {
>> + pinctrl_hog: hoggrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 /* GPIO0 */
>> + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 /* GPIO1 */
>> + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 /* GPIO2 */
>> + MX6QDL_PAD_NANDF_D3__GPIO2_IO03 0x80000000 /* GPIO3 */
>> + MX6QDL_PAD_NANDF_D4__GPIO2_IO04 0x80000000 /* GPIO4 */
>> + MX6QDL_PAD_NANDF_D5__GPIO2_IO05 0x80000000 /* GPIO5 */
>> + MX6QDL_PAD_NANDF_D6__GPIO2_IO06 0x80000000 /* GPIO6 */
>> + MX6QDL_PAD_NANDF_D7__GPIO2_IO07 0x80000000 /* GPIO7 */
>> + MX6QDL_PAD_NANDF_CLE__GPIO6_IO07 0x80000000 /* CAM_PWDN */
>> + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x80000000 /* CAM_RST */
>> + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* CAM CLK */
>> + MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x80000000 /* SUS_S3_OUT */
>> + MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x80000000 /* RTC_INT */
>> + >;
>> + };
>> +
>> + pinctrl_wdog: wdoggrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_GPIO_9__WDOG1_B 0x80000000 /* Watchdog out */
>> + >;
>> + };
>> +
>> + pinctrl_pmic: pmicgrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_GPIO_18__GPIO7_IO13 0x80000000 /* PMIC Interrupt */
>> + >;
>> + };
>> +
>> + pinctrl_usbhub: usbhubgrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_GPIO_16__GPIO7_IO11 0x80000000 /* HUB_RESET */
>> + >;
>> + };
>> +
>> + pinctrl_pcie: pciegrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x80000000 /* PCIe Reset */
>> + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 /* PCIe Wake */
>> + >;
>> + };
>> +
>> + pinctrl_display: dispgrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x80000000 /* BLEN_OUT */
>> + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x80000000 /* LVDS_PPEN_OUT */
>> + >;
>> + };
>> +
>> + pinctrl_usdhc4: usdhc4grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059
>> + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x17059
>> + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059
>> + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059
>> + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059
>> + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059
>> + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059
>> + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059
>> + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059
>> + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059
>> + MX6QDL_PAD_NANDF_CS0__GPIO6_IO11 0x80000000 /* uSDHC4 CD */
>> + MX6QDL_PAD_NANDF_CS1__GPIO6_IO14 0x80000000 /* uSDHC4 SDIO PWR */
>> + MX6QDL_PAD_NANDF_CS2__GPIO6_IO15 0x80000000 /* uSDHC4 SDIO WP */
>> + MX6QDL_PAD_NANDF_CS3__GPIO6_IO16 0x80000000 /* uSDHC4 SDIO LED */
>> + >;
>> + };
>> +
>> + pinctrl_ecspi1: ecspi1grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
>> + MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
>> + MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
>> + MX6QDL_PAD_EIM_EB2__GPIO2_IO30 0x80000000 /* SPI1 CS */
>> + >;
>> + };
>> +
>> + pinctrl_ecspi5: ecspi5rp-1 {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD1_DAT0__ECSPI5_MISO 0x80000000
>> + MX6QDL_PAD_SD1_CMD__ECSPI5_MOSI 0x80000000
>> + MX6QDL_PAD_SD1_CLK__ECSPI5_SCLK 0x80000000
>> + MX6QDL_PAD_SD1_DAT1__GPIO1_IO17 0x80000000
>> + >;
>> + };
>> +
>> + pinctrl_pwm1: pwm1grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD1_DAT3__PWM1_OUT 0x1b0b1
>> + >;
>> + };
>> +
>> + pinctrl_pwm2: pwm2grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_GPIO_1__PWM2_OUT 0x1b0b1
>> + >;
>> + };
>> +
>> + pinctrl_usbotg: usbotggrp {
>> + fsl,pins = <
>> + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
>> + >;
>> + };
>> +
>> + pinctrl_i2c1: i2c1grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1
>> + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1
>> + >;
>> + };
>> +
>> + pinctrl_i2c2: i2c2grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
>> + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>> + >;
>> + };
>> +
>> + pinctrl_i2c3: i2c3grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
>> + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>> + >;
>> + };
>> +
>> + pinctrl_uart3: uart3grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
>> + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
>> + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1
>> + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1
>> + >;
>> + };
>> +
>> + pinctrl_uart4: uart4grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_KEY_COL0__UART4_TX_DATA 0x1b0b1
>> + MX6QDL_PAD_KEY_ROW0__UART4_RX_DATA 0x1b0b1
>> + >;
>> + };
>> +
>> + pinctrl_usdhc2: usdhc2grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059
>> + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059
>> + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059
>> + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059
>> + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059
>> + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059
>> + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 /* uSDHC2 CD */
>> + >;
>> + };
>> +
>> + pinctrl_usdhc3: usdhc3grp {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
>> + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
>> + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
>> + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
>> + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
>> + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>> + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059
>> + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059
>> + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059
>> + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059
>> + >;
>> + };
>> +
>> + pinctrl_usdhc3_reset: usdhc3grp-reset {
>> + fsl,pins = <
>> + MX6QDL_PAD_SD3_RST__SD3_RESET 0x170F9
>> + >;
>> + };
>> +
>> + pinctrl_audmux: audmux {
>> + fsl,pins = <
>> + MX6QDL_PAD_DISP0_DAT20__AUD4_TXC 0x130b0
>> + MX6QDL_PAD_DISP0_DAT21__AUD4_TXD 0x130b0
>> + MX6QDL_PAD_DISP0_DAT22__AUD4_TXFS 0x130b0
>> + MX6QDL_PAD_DISP0_DAT23__AUD4_RXD 0x130b0
>> + >;
>> + };
>> +
>> + pinctrl_enet: pinctrl_enet {
>> + fsl,pins = <
>> + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x100b0
>> + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x100b0
>> + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x100b0
>> + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x100b0
>> + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x100b0
>> + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x100b0
>> + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x100b0
>> + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x100b0
>> + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x100b0
>> + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0
>> + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0
>> + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0
>> + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0
>> + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0
>> + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0
>> + MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x80000000 /* FEC Reset */
>> + MX6QDL_PAD_GPIO_19__GPIO4_IO05 0x80000000 /* AR8033 Interrupt */
>> + >;
>> + };
>> + };
>> +};
>> +
>> +&pcie {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pcie>;
>> + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
>> + status = "okay";
>> +};
>> +
>> +
>> +&pwm1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm1>;
>> + status = "okay";
>> +};
>> +
>> +&pwm2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pwm2>;
>> + status = "okay";
>> +};
>> +
>> +&sata {
>> + status = "okay";
>> +};
>> +
>> +&ssi1 {
>> + fsl,mode = "i2s-master";
>> + status = "okay";
>> +};
>> +
>> +&uart3 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_uart3>;
>> + fsl,uart-has-rtscts;
>> + status = "okay";
>> +};
>> +
>> +&uart4 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_uart4>;
>> + status = "okay";
>> +};
>> +
>> +&usbh1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usbhub>;
>> + vbus-supply = <®_usb_h1_vbus>;
>> + reset-gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
>> + status = "okay";
>> +};
>> +
>> +&usbotg {
>> + vbus-supply = <®_usb_otg_vbus>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usbotg>;
>> + disable-over-current;
>> + status = "okay";
>> +};
>> +
>> +&usdhc2 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usdhc2>;
>> + cd-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
>> + no-1-8-v;
>> + keep-power-in-suspend;
>> + enable-sdio-wakeup;
>> + status = "okay";
>> +};
>> +
>> +&usdhc3 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_usdhc3 &pinctrl_usdhc3_reset>;
>> + bus-width = <8>;
>> + vmmc-supply = <&vdd_bperi>;
>> + vqmmc-supply = <&vdd_bio>;
>> + non-removable;
>> + keep-power-in-suspend;
>> + status = "okay";
>> +};
>> +
>> +&wdog1 {
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_wdog>;
>> +};
>
More information about the linux-arm-kernel
mailing list