[RFC v03 03/15] dmaengine: core: Introduce new, universal API to request a channel
Andy Shevchenko
andy.shevchenko at gmail.com
Wed Dec 2 06:35:40 PST 2015
On Wed, Dec 2, 2015 at 3:59 PM, Peter Ujfalusi <peter.ujfalusi at ti.com> wrote:
> The two API function can cover most, if not all current APIs used to
> request a channel. With minimal effort dmaengine drivers, platforms and
> dmaengine user drivers can be converted to use the two function.
>
> struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask);
>
> To request any channel matching with the requested capabilities, can be
> used to request channel for memcpy, memset, xor, etc where no hardware
> synchronization is needed.
>
> struct dma_chan *dma_request_chan(struct device *dev, const char *name);
> To request a slave channel. The dma_request_chan() will try to find the
> channel via DT, ACPI or in case if the kernel booted in non DT/ACPI mode
> it will use a filter lookup table and retrieves the needed information from
> the dma_filter_map provided by the DMA drivers.
> This legacy mode needs changes in platform code, in dmaengine drivers and
> finally the dmaengine user drivers can be converted:
>
> For each dmaengine driver an array of DMA device, slave and the parameter
> for the filter function needs to be added:
>
> static const struct dma_filter_map da830_edma_map[] = {
> { "davinci-mcasp.0", "rx", EDMA_FILTER_PARAM(0, 0) },
> { "davinci-mcasp.0", "tx", EDMA_FILTER_PARAM(0, 1) },
> { "davinci-mcasp.1", "rx", EDMA_FILTER_PARAM(0, 2) },
> { "davinci-mcasp.1", "tx", EDMA_FILTER_PARAM(0, 3) },
> { "davinci-mcasp.2", "rx", EDMA_FILTER_PARAM(0, 4) },
> { "davinci-mcasp.2", "tx", EDMA_FILTER_PARAM(0, 5) },
> { "spi_davinci.0", "rx", EDMA_FILTER_PARAM(0, 14) },
> { "spi_davinci.0", "tx", EDMA_FILTER_PARAM(0, 15) },
> { "da830-mmc.0", "rx", EDMA_FILTER_PARAM(0, 16) },
> { "da830-mmc.0", "tx", EDMA_FILTER_PARAM(0, 17) },
> { "spi_davinci.1", "rx", EDMA_FILTER_PARAM(0, 18) },
> { "spi_davinci.1", "tx", EDMA_FILTER_PARAM(0, 19) },
> };
>
> This information is going to be needed by the dmaengine driver, so
> modification to the platform_data is needed, and the driver map should be
> added to the pdata of the DMA driver:
>
> da8xx_edma0_pdata.slave_map = da830_edma_map;
> da8xx_edma0_pdata.slavecnt = ARRAY_SIZE(da830_edma_map);
>
> The DMA driver then needs to configure the needed device -> filter_fn
> mapping before it registers with dma_async_device_register() :
>
> if (info->slave_map) {
> ecc->dma_slave.filter_map.map = info->slave_map;
> ecc->dma_slave.filter_map.mapcnt = info->slavecnt;
> ecc->dma_slave.filter_map.filter_fn = edma_filter_fn;
> }
>
> When neither DT or ACPI lookup is available the dma_request_chan() will
> try to match the requester's device name with the filter_map's list of
> device names, when a match found it will use the information from the
> dma_filter_map to get the channel with the dma_get_channel() internal
> function.
>
Few nitpicks below.
> Signed-off-by: Peter Ujfalusi <peter.ujfalusi at ti.com>
> ---
> Documentation/dmaengine/client.txt | 23 +++------
> drivers/dma/dmaengine.c | 98 ++++++++++++++++++++++++++++++++++++++
> include/linux/dmaengine.h | 27 +++++++++++
> 3 files changed, 131 insertions(+), 17 deletions(-)
>
> diff --git a/Documentation/dmaengine/client.txt b/Documentation/dmaengine/client.txt
> index d9f9f461102a..6c72a06eb1a5 100644
> --- a/Documentation/dmaengine/client.txt
> +++ b/Documentation/dmaengine/client.txt
> @@ -22,25 +22,14 @@ The slave DMA usage consists of following steps:
> Channel allocation is slightly different in the slave DMA context,
> client drivers typically need a channel from a particular DMA
> controller only and even in some cases a specific channel is desired.
> - To request a channel dma_request_channel() API is used.
> + To request a channel dma_request_chan() API is used.
>
> Interface:
> - struct dma_chan *dma_request_channel(dma_cap_mask_t mask,
> - dma_filter_fn filter_fn,
> - void *filter_param);
> - where dma_filter_fn is defined as:
> - typedef bool (*dma_filter_fn)(struct dma_chan *chan, void *filter_param);
> -
> - The 'filter_fn' parameter is optional, but highly recommended for
> - slave and cyclic channels as they typically need to obtain a specific
> - DMA channel.
> -
> - When the optional 'filter_fn' parameter is NULL, dma_request_channel()
> - simply returns the first channel that satisfies the capability mask.
> -
> - Otherwise, the 'filter_fn' routine will be called once for each free
> - channel which has a capability in 'mask'. 'filter_fn' is expected to
> - return 'true' when the desired DMA channel is found.
> + struct dma_chan *dma_request_chan(struct device *dev, const char *name);
> +
> + Which will find and return the 'name' DMA channel associated with the 'dev'
> + device. The association is done via DT, ACPI or board file based
> + dma_map_filter matching table.
>
> A channel allocated via this interface is exclusive to the caller,
> until dma_release_channel() is called.
> diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
> index ea9d66982d40..b9dc1512c4aa 100644
> --- a/drivers/dma/dmaengine.c
> +++ b/drivers/dma/dmaengine.c
> @@ -43,6 +43,7 @@
>
> #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
>
> +#include <linux/platform_device.h>
> #include <linux/dma-mapping.h>
> #include <linux/init.h>
> #include <linux/module.h>
> @@ -712,6 +713,103 @@ struct dma_chan *dma_request_slave_channel(struct device *dev,
> }
> EXPORT_SYMBOL_GPL(dma_request_slave_channel);
>
> +const static struct dma_filter_map *dma_filter_match(struct dma_device *device,
> + const char *name,
> + struct device *dev)
> +{
> + const struct dma_filter_map *map_found = NULL;
> + int i;
> +
> + if (!device->filter_map.mapcnt)
> + return NULL;
> +
> + for (i = 0; i < device->filter_map.mapcnt; i++) {
> + const struct dma_filter_map *map = &device->filter_map.map[i];
> +
> + if (!strcmp(map->devname, dev_name(dev)) &&
> + !strcmp(map->slave, name)) {
> + map_found = map;
> + break;
return map?
> + }
> + }
> +
return NULL;
> + return map_found;
> +}
> +
> +/**
> + * dma_request_chan - try to allocate an exclusive slave channel
> + * @dev: pointer to client device structure
> + * @name: slave channel name
> + *
> + * Returns pointer to appropriate DMA channel on success or an error pointer.
> + */
> +struct dma_chan *dma_request_chan(struct device *dev, const char *name)
> +{
> + struct dma_device *device, *_d;
If you name *d, *_d; it would…
> + struct dma_chan *chan = NULL;
> +
> + /* If device-tree is present get slave info from here */
> + if (dev->of_node)
> + chan = of_dma_request_slave_channel(dev->of_node, name);
> +
> + /* If device was enumerated by ACPI get slave info from here */
> + if (has_acpi_companion(dev) && !chan)
> + chan = acpi_dma_request_slave_chan_by_name(dev, name);
This part might be a good candidate to be moved to
drivers/base/property.c as
struct dma_chan *device_property_dma_request_chan(…) or alike.
> +
> + if (chan) {
> + /* Valid channel found */
> + if (!IS_ERR(chan))
> + return chan;
> +
They might return EPROBE_DEFER. Is any specific handling needed here?
> + pr_warn("%s: %s DMA request failed, falling back to legacy\n",
> + __func__, dev->of_node ? "OF" : "ACPI");
> + }
> +
> + /* Try to find the channel via the DMA filter map(s) */
> + mutex_lock(&dma_list_mutex);
> + list_for_each_entry_safe(device, _d, &dma_device_list, global_node) {
> + dma_cap_mask_t mask;
> + const struct dma_filter_map *map = dma_filter_match(device,
> + name, dev);
> +
> + if (!map)
> + continue;
> +
> + dma_cap_zero(mask);
> + dma_cap_set(DMA_SLAVE, mask);
> +
> + chan = find_candidate(device, &mask,
> + device->filter_map.filter_fn, map->param);
…allow to put this on single line I believe.
> + if (!IS_ERR(chan))
> + break;
> + }
> + mutex_unlock(&dma_list_mutex);
> +
> + return chan ? chan : ERR_PTR(-EPROBE_DEFER);
> +}
> +EXPORT_SYMBOL_GPL(dma_request_chan);
> +
> +/**
> + * dma_request_chan_by_mask - allocate a channel satisfying certain capabilities
> + * @mask: capabilities that the channel must satisfy
> + *
> + * Returns pointer to appropriate DMA channel on success or an error pointer.
> + */
> +struct dma_chan *dma_request_chan_by_mask(const dma_cap_mask_t *mask)
> +{
> + struct dma_chan *chan;
> +
> + if (!mask)
> + return ERR_PTR(-ENODEV);
> +
> + chan = __dma_request_channel(mask, NULL, NULL);
> + if (!chan)
> + chan = ERR_PTR(-ENODEV);
> +
> + return chan;
> +}
> +EXPORT_SYMBOL_GPL(dma_request_chan_by_mask);
> +
> void dma_release_channel(struct dma_chan *chan)
> {
> mutex_lock(&dma_list_mutex);
> diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
> index a2b7c2071cf4..49d48e69c179 100644
> --- a/include/linux/dmaengine.h
> +++ b/include/linux/dmaengine.h
> @@ -606,6 +606,18 @@ enum dmaengine_alignment {
> DMAENGINE_ALIGN_64_BYTES = 6,
> };
>
> +struct dma_filter_map {
> + char *devname;
const ?
> + char *slave;
Ditto.
> + void *param;
> +};
> +
> +struct dma_filter {
> + dma_filter_fn filter_fn;
> + int mapcnt;
> + const struct dma_filter_map *map;
> +};
--
With Best Regards,
Andy Shevchenko
More information about the linux-arm-kernel
mailing list