答复: [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node.

[Meng Yi]

Thanks A lot!

Regards,

Yi Meng

________________________________________
发件人: Shawn Guo <shawnguo at kernel.org>
发送时间: 2015年12月2日 20:40
收件人: Yi Meng-B56799
抄送: Jianwei Wang; devicetree at vger.kernel.org; Xiubo Li; Wang Huan-B18965; linux-kernel at vger.kernel.org; linux-arm-kernel at lists.infradead.org
主题: Re: [PATCH 1/2] ARM: dts: ls1021a: Add DCU dts node.

On Wed, Nov 25, 2015 at 02:46:06PM +0800, Meng Yi wrote:
> Signed-off-by: Alison Wang <b18965 at freescale.com>
> Signed-off-by: Xiubo Li <lixiubo at cmss.chinamobile.com>
> Signed-off-by: Jianwei Wang <jianwei.wang.chn at gmail.com>

Forgot to mention that you missed adding your own SoB.  Added when
applying.

Shawn

> ---
>  arch/arm/boot/dts/ls1021a.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi
> index 9430a99..f01c98b 100644
> --- a/arch/arm/boot/dts/ls1021a.dtsi
> +++ b/arch/arm/boot/dts/ls1021a.dtsi
> @@ -428,6 +428,16 @@
>                                <&platform_clk 1>;
>               };
>
> +             dcu: dcu at 2ce0000 {
> +                     compatible = "fsl,ls1021a-dcu";
> +                     reg = <0x0 0x2ce0000 0x0 0x10000>;
> +                     interrupts = <GIC_SPI 172 IRQ_TYPE_LEVEL_HIGH>;
> +                     clocks = <&platform_clk 0>;
> +                     clock-names = "dcu";
> +                     big-endian;
> +                     status = "disabled";
> +             };
> +
>               mdio0: mdio at 2d24000 {
>                       compatible = "gianfar";
>                       device_type = "mdio";
> --
> 2.1.0.27.g96db324
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel at lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>