[PATCH 2/3] ARM: bcm2835: add rpi power domain driver

Kevin Hilman khilman at kernel.org
Tue Dec 1 15:27:57 PST 2015


Alexander Aring <alex.aring at gmail.com> writes:

> Hi,
>
> On Mon, Nov 30, 2015 at 03:51:56PM -0800, Kevin Hilman wrote:
>> Alexander Aring <alex.aring at gmail.com> writes:
>> 
>> > This patch adds support for RPi several Power Domains and enable support
>> > to enable the USB Power Domain when it's not enabled before.
>> >
>> > This patch based on Eric Anholt's patch to support Power Domains. He had
>> > an issue about -EPROBE_DEFER inside the power domain subsystem, this
>> > issue was solved by commit <311fa6a> ("PM / Domains: Return -EPROBE_DEFER
>> > if we fail to init or turn-on domain").
>> 
>> [...]
>> 
>> > +#define RPI_POWER_DOMAIN(_domain, _name)			\
>> > +	[_domain] = {						\
>> 
>> Using _domain as the array index is going to create a sparsely filled
>> array here, wasting memory.   I'm not sure what the other domain numbers
>> are for other domains to know if this is a big waste or not, but it's
>> still a bit wasteful.
>> 
>> In any case, AFAICT, it doesn't look like you need to have the array
>> index match the domain number anyways since you're using container_of().
>> 
>> So I suggest just removing this array index part, and just creating them
>> in arrary order.  Then your _probe function isn't going to try to setup
>> 3 non-enabled domains before it finally hits the USB domain.
>> 
>
> The idea is here to keeping the _same_ power domains indexes for
> device-tree power domain API like the RPi firmware provides it.
>
> If somebody dumps the devicetree and see the power domain index, if
> he/she does then a firmware API power domain index mapping it is wrong.
> Because we need then a separate mapping:
>
> $ARRAY_DEFINED_INDEX <-> $RPI_FIRMWARE_POWER_DOMAIN_API_INDEX
>
> With the current solution to make a 1:1 mapping it there is no
> confusing anymore, because:
>
> $ARRAY_DEFINED_INDEX == $RPI_FIRMWARE_POWER_DOMAIN_API_INDEX

I'm not proposing to change the DT numbers or the firmware numbers.  All
I'm proposing is that those numbers don't need to be mapped to the array
index.  IOW, in your structure definition macro:

+#define RPI_POWER_DOMAIN(_domain, _name)			\
+	[_domain] = {						\
+		.domain = _domain,				\
[...]

just drop the " [_domain] = { " line.

> Also there exists power domains 1-10 (so far I know), 1-2 are currently
> not used (and dummy-calls inside the rpi firmware implementation). So
> later they should be provided anyway.

They could then be added in any order in the struture.

> There exists a little improvement to let the for (i = 0; i < num_domains
> ...) start at "i = 1", the entry with index "0" will be a waste of memory
> then and it's not provided by the firmware API as a power domain.

Even index 0 will not be wasted with the above approach.

Kevin




More information about the linux-arm-kernel mailing list