[PATCH] Enable PCIe PHY support in Cygnus

[Florian Fainelli]

On 24/11/15 16:12, Florian Fainelli wrote:
> On 18/11/15 10:16, Ray Jui wrote:
>> This patch enales PCIe PHY in device tree for Broadcom Cygnus based platforms
>>
>> This patch is developed based on v4.4-rc1 and available here:
>> https://github.com/Broadcom/cygnus-linux/tree/cygnus-pcie-phy-dt-v1
>>
>> Ray Jui (1):
>>   ARM: dts: enable PCIe PHY support for Cygnus
> 
> Applied to devicetree/next with Scott's Acked-by, thanks!

This caused the DTC compiler to warn:

Warning (reg_format): "reg" property in /axi/phy at 0301d0a0/phy at 0 has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (reg_format): "reg" property in /axi/phy at 0301d0a0/phy at 1 has
invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells
value for /axi/phy at 0301d0a0/phy at 0
Warning (avoid_default_addr_size): Relying on default #size-cells value
for /axi/phy at 0301d0a0/phy at 0
Warning (avoid_default_addr_size): Relying on default #address-cells
value for /axi/phy at 0301d0a0/phy at 1
Warning (avoid_default_addr_size): Relying on default #size-cells value
for /axi/phy at 0301d0a0/phy at 1
  CC      drivers/base/power/runtime.o
  DTC     arch/arm/boot/dts/bcm911360k.dtb
  CC      lib/bitmap.o

I added an #address-cells = <0> and #size-cells = <1> to fix this, since
your reg property is a single digit.
-- 
Florian